If you ask me, half an hour to days. It depends on complexity

Oh okay and also are all the designed beyblades metal or plastic?

Design are just data. You decide the method To 3D print them. FDM is most common way, which prints PLA and ABS
 SLS prints Metal.

---

I checked the back of the beys when I was playing, they have slopes, I just don't know if they would work or not.
plus the beys without abilities would work the best because of the fact that they wouldn't need separated parts.

I'm almost certain that Roktavor R3 and Valtryek V3 (both forms) could be printed with multiple parts. I haven't played the app in a while because it keeps crashing upon startup, but I remember that the app showed V3's wings moving, but idk if it has the peg that allows for a spring, and it might clip through the Layer model. For R3, the wings would almost always show up right underneath the layer for me because of some glitch, so they have to be separate.

The Roktavor R3 wings are part of the model, it's just that there's a glitch where the wings are off model. V3 has the peg, but it can't move if it's all one piece. Again it would be better because beys without abilities wouldn't need separate parts for the abilities.

I'm almost certain that Roktavor R3 and Valtryek V3 (both forms) could be printed with multiple parts. I haven't played the app in a while because it keeps crashing upon startup, but I remember that the app showed V3's wings moving, but idk if it has the peg that allows for a spring, and it might clip through the Layer model. For R3, the wings would almost always show up right underneath the layer for me because of some glitch, so they have to be separate.

The Roktavor R3 wings are part of the model, it's just that there's a glitch where the wings are off model. V3 has the peg, but it can't move if it's all one piece. Again it would be better because beys without abilities wouldn't need separate parts for the abilities.

I think that, because they’re moving parts, they have to me separate models, as long as they’re shown to do that in the game.

Oh okay and also are all the designed beyblades metal or plastic?

Design are just data. You decide the method To 3D print them. FDM is most common way, which prints PLA and ABS
 SLS prints Metal.

I think I understand now  so if the blader wanted a metal layer all he or she would have to do is use SLS?

Design are just data. You decide the method To 3D print them. FDM is most common way, which prints PLA and ABS
 SLS prints Metal.

I think I understand now  so if the blader wanted a metal layer all he or she would have to do is use SLS?

Metal printing isn't cheap at the first place. If any service gives you option you can ask if it's metal or something else. 
It's most common way of metal printing, but other materials with similar property can use used too. 

Overall, SLS is metal and select it if you want metal.

---

I think I understand now  so if the blader wanted a metal layer all he or she would have to do is use SLS?

Metal printing isn't cheap at the first place. If any service gives you option you can ask if it's metal or something else. 
It's most common way of metal printing, but other materials with similar property can use used too. 

Overall, SLS is metal and select it if you want metal.

Oh Okay, do you think it's possible for me to create my own beyblade if it's my first time?

Metal printing isn't cheap at the first place. If any service gives you option you can ask if it's metal or something else. 
It's most common way of metal printing, but other materials with similar property can use used too. 

Overall, SLS is metal and select it if you want metal.

Oh Okay, do you think it's possible for me to create my own beyblade if it's my first time?

It is. Just don't get confused from vertices. Try something simple first.

---

Oh Okay, do you think it's possible for me to create my own beyblade if it's my first time?

It is. Just don't get confused from vertices. Try something simple first.

Thanks, I kinda had an idea about the beyblade.  Can I show you?

you can post anything related to the thread title as long as it is not inappropriate.

The Roktavor R3 wings are part of the model, it's just that there's a glitch where the wings are off model. V3 has the peg, but it can't move if it's all one piece. Again it would be better because beys without abilities wouldn't need separate parts for the abilities.

I think that, because they’re moving parts, they have to me separate models, as long as they’re shown to do that in the game.

Which would explain the glitch. But if the wings were separate, we could easily just 3d print those and replace the normal R3 wings and and possibly R4 or Ragnarok line. Then, Boom we have a new mod. We need to get somebody on that.

I think that, because they’re moving parts, they have to me separate models, as long as they’re shown to do that in the game.

Which would explain the glitch. But if the wings were separate, we could easily just 3d print those and replace the normal R3 wings and and possibly R4 or Ragnarok line. Then, Boom we have a new mod. We need to get somebody on that.

As long as the wings don't have some aspect that would make them impossible to put onto the real Layer, it would be basic work for someone that knows about that kind of stuff. If there is a shortcut they took that isn't normally visible, editing the model would be necessary.

So, how would one make spring loaded parts like G Valkyrie, and how long would that take? Also, how do I make rubber contact points? I have a couple designs I have these gimmicks for and I want to have them printed. It's just a matter of finding out how to execute said gimmicks XD

---

"Do you want to live in this boring reality, or do you want to change it with me?"

- Yuuta Togashi aka Dark Flame Master from Chuunibyou episode 12

So, how would one make spring loaded parts like G Valkyrie, and how long would that take? Also, how do I make rubber contact points? I have a couple designs I have these gimmicks for and I want to have them printed. It's just a matter of finding out how to execute said gimmicks XD

For Spring Loaded Components, it should be divided in Layers. 

Rubber Contacts points are easier to MOLD out than find a Printing service that prints with Soft Pla Filament. Making Molds isn't as easy.

---

Which would explain the glitch. But if the wings were separate, we could easily just 3d print those and replace the normal R3 wings and and possibly R4 or Ragnarok line. Then, Boom we have a new mod. We need to get somebody on that.

As long as the wings don't have some aspect that would make them impossible to put onto the real Layer, it would be basic work for someone that knows about that kind of stuff. If there is a shortcut they took that isn't normally visible, editing the model would be necessary.

You're right, but if we want to see it happen, we need to ask a beytuber to try the mod, and we need a person to get the wings in the first place.

Does anyone knows or can anyone confirm to me which type of 3D printer filament have the highest grip, also do any one here have designed a part that uses a self-aligning ball bearing?

---

Also, what are you guys and/or girls talking about?

Does anyone knows or can anyone confirm to me which type of 3D printer filament have the highest grip, also do any one here have designed a part that uses a self-aligning ball bearing?

---

Also, what are you guys and/or girls talking about?

3D printing model gimmicks and ripping game files from the app. That's about all that I can gather from the past one or two pages of this thread XD

---

"Do you want to live in this boring reality, or do you want to change it with me?"

- Yuuta Togashi aka Dark Flame Master from Chuunibyou episode 12

I think CrazyAries has either abandoned this thread, started working on the other two Cho-Z Enhancement projects, or started trying to figure out the GT system

---

Beyblade Theory Combos:

Spoiler (Click to View)

Twin Nemesis 0Turn Xtend
Geist Fafnir 7Wall Merge'
Dead Phoenix 13Expand αnchor
Buster Xcalibur 1'αngle Operate
Ace Valkyrie 10Dagger Reboot' Sen
Bloody Longinus 11 Tower
Geist Fafnir Nine Quest

The list will be updated

Now, for some words of wisdom from Nam (me),

Spoiler (Click to View)

• There is no such thing as a bad part... except for Blow, Blow' and Sword
  
• You dare not even put Impact in the same category as those above. Impact is the worst of the worst, not even worth the title "Bad Part"
  
• Theory combos might be unexpectedly good if you just give them a try or two.
  
• Theory is love, theory is life.
  

Or maybe he doesn't want to post anything yet...(possible huge reveal???)

---

I think CrazyAries has either abandoned this thread, started working on the other two Cho-Z Enhancement projects, or started trying to figure out the GT system

You're most likely right about the latter, because I doubt they'll just abandon the forum, plus they seem to do this between them posting 3D models currently...

---

Or maybe he doesn't want to post anything yet...(possible huge reveal???)

...and you're probably also right as well.

Hey guys, new guy here. So I was wondering if anyone could help me make a Cho-Z ver of Inferno Ifrit as that's my favorite bey. I would like Crazy Aries to work on it, but I hear that he no longer takes request or aids people in design. Sorry for the inconvenience.

A few people can help you that are on this thread.

Anyone in particular?

Sunset Blader ( possible )
Adarsh Abhinav ( possible )

If your design is basic I could try...But I do not know how to do the links like Crazy Aries.

A few people can help you that are on this thread.

Sunset Blader ( possible )
Adarsh Abhinav ( possible )

If your design is basic I could try...But I do not know how to do the links like Crazy Aries.

Hm, I suppose I can sketch my idea. Just gotta rust off the ol' artist skills. I'm really just trying to take advantage of penn state's free 3d printer. Also, here's a picture of my boi

A few people can help you that are on this thread.

Sunset Blader ( possible )
Adarsh Abhinav ( possible )

If your design is basic I could try...But I do not know how to do the links like Crazy Aries.

Hm, I suppose I can sketch my idea. Just gotta rust off the ol' artist skills. I'm really just trying to take advantage of penn state's free 3d printer. Also, here's a picture of my boi

That looks really nice!

---

Uh ... I could use a few pointers with a couple of the software that I'm using to make my own Bey that I'm looking to 3D print, matter of fact they're the only two I've managed to mostly figure out, really.

---

This has been Peter_Potter. Jaa Ne!