This is not only a custom Layer.
This is totally a new Beyblade!
For one of the impressive beyblade of Metal series, I made a Burst version!
Earth Aquila. E. K!

Layer-Earth Aquila

Spoiler (Click to View)

Disc-End

Spoiler (Click to View)

Driver-Kernel

Spoiler (Click to View)

Video

Spoiler (Click to View)

Download 

i have a crazy idea now.
while i was checking materials i Found Sandstone, Do you think A Sand Stone bey is possible. (and that inner ring could be avoided with sandstone)

---

I actually made a driver similar to kernel a couple of weeks , using wedge and sculping a rubber cover also 3d printing a special graping part so the rubber tip doesnt fall off


CrazyAries Do you mind taking a look on some of my designs

Dude. That's dope. still, I was thinking that we could get a deeper level of customization with a Burst tip that allows you to use spin tracks and performance tips from the metal series. the logistics of this do seem a bit ... difficult, though, so maybe I'm just crazy.

---

This has been Peter_Potter. Jaa Ne!

This is not only a custom Layer.
This is totally a new Beyblade!
For one of the impressive beyblade of Metal series, I made a Burst version!
Earth Aquila. E. K!

Layer-Earth Aquila

Spoiler (Click to View)

Disc-End

Spoiler (Click to View)

Driver-Kernel

Spoiler (Click to View)

Video

Spoiler (Click to View)

Download 

i have a crazy idea now.
while i was checking materials i Found Sandstone, Do you think A Sand Stone bey is possible. (and that inner ring could be avoided with sandstone)

A sand stone beyblade is a cool idea, but shaping a sand stone is a heck lot of work and needs professional guidance. Plus if you make a layer out of sandstone, you need a very stable and powerful driver for this to hold the weight of it, after all you cannot make a driver out of sandstone too. :P. 
But it's a cool idea.

i have a crazy idea now.
while i was checking materials i Found Sandstone, Do you think A Sand Stone bey is possible. (and that inner ring could be avoided with sandstone)

A sand stone beyblade is a cool idea, but shaping a sand stone is a heck lot of work and needs professional guidance. Plus if you make a layer out of sandstone, you need a very stable and powerful driver for this to hold the weight of it, after all you cannot make a driver out of sandstone too. . 
But it's a cool idea.

Isn't Sandstone fragile as well? It's be a bit less durable too.

---

I'm ready for any challenge! Bring them all on!
Check out my Wattpad for some stories i'll be writing soon!
https://www.wattpad.com/user/StormBringerBoy

A sand stone beyblade is a cool idea, but shaping a sand stone is a heck lot of work and needs professional guidance. Plus if you make a layer out of sandstone, you need a very stable and powerful driver for this to hold the weight of it, after all you cannot make a driver out of sandstone too. . 
But it's a cool idea.

Isn't Sandstone fragile as well? It's be a bit less durable too.

You can easily solve that by having the outer layer of the layer be metal or plastic to protect the sandstone from wear and tear. I mean, if you wanted to.

---

This has been Peter_Potter. Jaa Ne!

I had a crazy idea of my own. I play Monster Hunter: World, and I had this thought: How would one go about making a custom bey that looks and works like a charge blade hunter clad in Azure Rathalos gear? My thoughts were that you'd have a multi-layer layer that can be switched to different positions for different functions/attacks (weak slash, return stroke, spinning slash, etc.), a double-sided disc that determined whether you were in sword and shield (default) or axe mode, and then ... I dunno what to do about the tip. maybe make it where it rotates and that causes it to switch between being mobile and being powerful? I'll leave it up to y'all.

---

This has been Peter_Potter. Jaa Ne!

i have a crazy idea now.
while i was checking materials i Found Sandstone, Do you think A Sand Stone bey is possible. (and that inner ring could be avoided with sandstone)

A sand stone beyblade is a cool idea, but shaping a sand stone is a heck lot of work and needs professional guidance. Plus if you make a layer out of sandstone, you need a very stable and powerful driver for this to hold the weight of it, after all you cannot make a driver out of sandstone too. . 
But it's a cool idea.

we can 3d print that, SandStone earth wheel(kinda)



and Fragility is what i wanted to know, but it doesn't seems fragile

---

A sand stone beyblade is a cool idea, but shaping a sand stone is a heck lot of work and needs professional guidance. Plus if you make a layer out of sandstone, you need a very stable and powerful driver for this to hold the weight of it, after all you cannot make a driver out of sandstone too. :P. 
But it's a cool idea.

we can 3d print that, SandStone earth wheel(kinda)



and Fragility is what i wanted to know, but it doesn't seems fragile

Well, Sandstone breaks apart very easily. But @[CrazyAries], you have more knowledge on this. Is this idea possible?

@[CrazyAries], sorry if you already answered this question somewhere, but what 3D Printing software do you use? I'm testing things with Sketchup right now since FreeCAD seemed a bit stiff, but if there's an easier-to-use software...well...idk. Just trying to get some help seeing that I'm not particularly skilled in 3D printing yet...

---

Hi! I've been on and off this site for a while now, but if you're new or just seeing this I hope you enjoy your stay on the WBO.

@[CrazyAries], sorry if you already answered this question somewhere, but what 3D Printing software do you use? I'm testing things with Sketchup right now since FreeCAD seemed a bit stiff, but if there's an easier-to-use software...well...idk. Just trying to get some help seeing that I'm not particularly skilled in 3D printing yet...

I guess it's Creo Parametric 2.0

we can 3d print that, SandStone earth wheel(kinda)



and Fragility is what i wanted to know, but it doesn't seems fragile

Well, Sandstone breaks apart very easily. But @[CrazyAries], you have more knowledge on this. Is this idea possible?

Well, if you really want to make it, I cannot say that is totally impossible. But it could be very rough and sandstone is not suitable for such a small thing like Beyblade.

---

Is this the right place to request a design too?  If yes, then can u make a file for a red phoenix themed layer?

---

Fav cho-Z combos
[\spoiler]
cR with A level chip 7 Revolve
rP with A level chip 10 Cross Atomic
zA with A level chip 0 Bump Destroy
hS with A level chip 7 Glaive Bearing
vL with A level chip 0 Reach Jolt
bL with A level chip 0 Glaive Variable(worn)

Is this the right place to request a design too?  If yes, then can u make a file for a red phoenix themed layer?

He's not taking requests. That's the purpose of the thread

---

~Thunder

Oh wow that is nice

---

Check out my YouTube channel!

Is this the right place to request a design too?  If yes, then can u make a file for a red phoenix themed layer?

Maybe i can make one for you. What type is it?

---

I'm ready for any challenge! Bring them all on!
Check out my Wattpad for some stories i'll be writing soon!
https://www.wattpad.com/user/StormBringerBoy

what software do you use to make these?

I had the entire beyblade printed through Shapeways and now I'm just waiting for it to come in. It was much more costly than the other service I used but I hope it turns out better.

Maybe i can make one for you. What type is it?

A stamina type. I would like a design in which phoenix heads are significantsy visible.also thanks.

---

Fav cho-Z combos
[\spoiler]
cR with A level chip 7 Revolve
rP with A level chip 10 Cross Atomic
zA with A level chip 0 Bump Destroy
hS with A level chip 7 Glaive Bearing
vL with A level chip 0 Reach Jolt
bL with A level chip 0 Glaive Variable(worn)

Maybe i can make one for you. What type is it?

A stamina type. I would like a design in which phoenix heads are significantsy visible.also thanks.

Ok, i'll see what i can do today.

---

I'm ready for any challenge! Bring them all on!
Check out my Wattpad for some stories i'll be writing soon!
https://www.wattpad.com/user/StormBringerBoy

Hello, this is CrazyAries. 
About two weeks ago, I designed a Layer of Beyblade Burst for ilinnuc, and he made some videos for that.
After that, Many people sent me PM and applauded the beyblade I designed. Some of them asked me to design a beyblade for them. I am glad that so many people like my work and I do understand that it is really exciting to have a own custom beyblade. Unfortunately, it is really difficult for me, as a single person, to satisfy so many people, since I have my own work and study.
However, I can design some beyblade and share with all people here. In this thread, I would post one or two Layer design every month and share them on my Google Drive. You can download the files and look for a workshop to print it if you like them.
As you download the .zip files, you need to extract the files and you would see a .stp file as well as a .stl file. The .stp file is a backup, and the ones who want to add something or modify the model can work on this file. And the .stl file is the one you would need for 3D print.

---

Here is the first beyblade for all you guys:
Blast Katana:
Download

pic (Click to View)

Recommended combos:
6Vortex.Xtreme/Jolt
7Bump.Revolve/Orbit

---

Do u think u can make a bey like striker for me but burst?

---

Devin Jeremy Rush / heavenlygamer19

does anyone know a designer so I don't drive CrazyAries insane?

Is their anyone that can design a burst layer for me please ???? It would mean a lot to get sum help to get my own layer made
but if u can help out or know anyone who can lmk

Is their anyone that can design a burst layer for me please ???? It would mean a lot to get sum help to get my own layer made
but if u can help out or know anyone who can lmk

If you could describe how you want the layer to be then, @[CrazyAries] is just the man for this job! He is incredible at designing layers and I am pretty sure that he will help you.

Yah I seen he made Jake an kevo layers an I tried hitting him up for one but he said every since Jake put that video out alot of ppl been hitting him for a layer an that was like around last month sum time

---

I had the entire beyblade printed through Shapeways and now I'm just waiting for it to come in. It was much more costly than the other service I used but I hope it turns out better.

Wat do u think the coast range be to get a regular burst layer made bro???