I dont like this, Hasbro hates Valtryek.

For all we know, the 2A Disk hasn't been fully modeled yet or is planned for release on a different version of Brave Valtryek with an Evolutional-SPM.

I dont like this, Hasbro hates Valtryek.

For all we know, the 2A Disk hasn't been fully modeled yet or is planned for release on a different version of Brave Valtryek with an Evolutional-SPM.

Yeah, you might be right.

So, I was right, HyperSphere Draciel F & Storm Pegasis P5 will be out in the Burst Surge Toyline in 2021.

So, I was right, HyperSphere Draciel F & Storm Pegasis P5 will be out in the Burst Surge Toyline in 2021.

Mixed feelings. On one hand, Hypersphere actually works, on the other, they lose all of their original gimmicks.

---

Perhaps the BIGGEST piece of information we have some releases coming back in their natural SST form with Sting/Biltz and Quest/Jolt along with most of the beys planned for Wave one, some things are super exciting! The new tip system is also really cool!

I'm not going to poke fun at Zankye squealing at some of this new stuff, mainly because I squealed way harder. Ngl, I think I'm gonna' be pre-ordering some Hasbro

---

I'm also glad that we are getting the Poison base, but I wish we could get the Hydra chip. I guess that is because of the Hydrax chip.

Honestly, I figured we wouldn't even get Poison, because I thought Viper was just their "version" of it

---

One must never, never, never rush the plumb bob~
Slow is the way, the only way to go~
Clear your schedule, before you use the plumb bob~
Yes, the plumb bob, is mighty, mighty, miiighty, sloooooooooooowww~

I'm siding with Zankye's theory which is Viper Hydrax is the evolution to Typhon.

I'm siding with Zankye's theory which is Viper Hydrax is the evolution to Typhon.

That has been confirmed.

---

From what it looks like, the Layer Rings will basically be very similar to the Rise Layer Bases, but modified to hold the new Chips.

---

Feel free to subscribe to my Beyblade channel on YouTube!: https://www.youtube.com/channel/UCSKpJJz...w/featured

So, I was right, HyperSphere Draciel F & Storm Pegasis P5 will be out in the Burst Surge Toyline in 2021.

Hasbro sure is taking their sweet time getting these plastic gen remakes out, sheesh.

I'm siding with Zankye's theory which is Viper Hydrax is the evolution to Typhon.

That has been confirmed.

---

From what it looks like, the Layer Rings will basically be very similar to the Rise Layer Bases, but modified to hold the new Chips.

Do you think the chips could be backwards compatible? Honestly I thought TT's would be back before SK actually came out

---

One must never, never, never rush the plumb bob~
Slow is the way, the only way to go~
Clear your schedule, before you use the plumb bob~
Yes, the plumb bob, is mighty, mighty, miiighty, sloooooooooooowww~

That has been confirmed.

---

From what it looks like, the Layer Rings will basically be very similar to the Rise Layer Bases, but modified to hold the new Chips.

Do you think the chips could be backwards compatible? Honestly I thought TT's would be back before SK actually came out

I honestly doubt it, it looks like there is no space in the back of the base to insert a chip.

---

Feel free to subscribe to my Beyblade channel on YouTube!: https://www.youtube.com/channel/UCSKpJJz...w/featured

New info on the basic launcher for starters and as well a closer look at the models

New info on the basic launcher for starters and as well a closer look at the models

Honestly I genuinely really like the way the chassis look as forge discs

---

Do you think the chips could be backwards compatible? Honestly I thought TT's would be back before SK actually came out

I honestly doubt it, it looks like there is no space in the back of the base to insert a chip.

I meant putting a "Surge" chip into a GT base

---

One must never, never, never rush the plumb bob~
Slow is the way, the only way to go~
Clear your schedule, before you use the plumb bob~
Yes, the plumb bob, is mighty, mighty, miiighty, sloooooooooooowww~

New info on the basic launcher for starters and as well a closer look at the models

Honestly I genuinely really like the way the chassis look as forge discs

---

I honestly doubt it, it looks like there is no space in the back of the base to insert a chip.

I meant putting a "Surge" chip into a GT base

Oh, maybe, the slopes on Surge's chips look the exact same as the GT chip slopes (in the app at least) so they could probably fit in, but might not lock in since the new chips are smaller than the GT chips.

---

Feel free to subscribe to my Beyblade channel on YouTube!: https://www.youtube.com/channel/UCSKpJJz...w/featured

What's the news on that Draciel F release?

Honestly I genuinely really like the way the chassis look as forge discs

---

I meant putting a "Surge" chip into a GT base

Oh, maybe, the slopes on Surge's chips look the exact same as the GT chip slopes (in the app at least) so they could probably fit in, but might not lock in since the new chips are smaller than the GT chips.

I actually tried puting my Valkyrie Sparking chip on a random Hasbro Base to get an idea how plausible it is to put a Surge chip in a Rise base, and if the dimensions of the chips are about the same as the ones in Sparking, then the tabs that clamp onto the Rise Chips won't reach the Surge chips at all. Another, the ledges on the chip that latch onto the launcher prongs were also stopping the chip from reaching the same level as the tabs on the base. Now, I don't know how different those launcher tabs would be on the Hasbro chip, which is why I mentioned the chips being unable to clamp onto the Rise Base first.

---

LET IT RIP!!

wbba profile

My two beys Earth Eagle, Dark Libra, forever lost,

you'll always be the one that started my hobby

and the Beyblade Geeks rekindled it.

[Image: pdXOXLR.jpg]

What's the news on that Draciel F release?

I think Hasbro will make Draciel F / Fortress will be in one of Beyblade Burst Surge's HyperSphere pack or starters like Storm Pegasis / Pegasus P5 in this years or next year: 2021.

I decided to do some window shopping while I was upstate getting getting some stuff 3D printed by a friend, and I finally found my Kerbeus

---

One must never, never, never rush the plumb bob~
Slow is the way, the only way to go~
Clear your schedule, before you use the plumb bob~
Yes, the plumb bob, is mighty, mighty, miiighty, sloooooooooooowww~

I decided to do some window shopping while I was upstate getting getting some stuff 3D printed by a friend, and I finally found my Kerbeus

The quest has finally been completed (also that’s a nice Kirby pouch you have, it would be a shame if someone were to steal it jk)

I decided to do some window shopping while I was upstate getting getting some stuff 3D printed by a friend, and I finally found my Kerbeus

Got the jacket too

---

I decided to do some window shopping while I was upstate getting getting some stuff 3D printed by a friend, and I finally found my Kerbeus

It's an N95 mask, so if you want my   h a l i t o s i s ,   go right ahead

---

I decided to do some window shopping while I was upstate getting getting some stuff 3D printed by a friend, and I finally found my Kerbeus

Got the jacket too

The jacket I already had, and "made"

---

One must never, never, never rush the plumb bob~
Slow is the way, the only way to go~
Clear your schedule, before you use the plumb bob~
Yes, the plumb bob, is mighty, mighty, miiighty, sloooooooooooowww~

Managed to find some pictures of the new Balar B4, Driger F and Wolborg (hopefully we see the Treptune pictures soon as well).
Balar B4:


Driger F:


Wolborg:


From these pictures, Evolution Slingshock is in it's first awakening already (not complete rubber flat, but more spikes than unawakened).  The blue plastic is nice and clear on the Balar layer as well.  Wolborg and Driger F also look nice, and hopefully we see Treptune soon as well.  Here are the links to the products:
https://www.walmart.com/ip/Beyblade-Burs.../466633507
https://www.walmart.com/ip/Beyblade-Burs.../448649238
https://www.walmart.com/ip/Beyblade-Burs.../589435605

Managed to find some pictures of the new Balar B4, Driger F and Wolborg (hopefully we see the Treptune pictures soon as well).
Balar B4:


Driger F:


Wolborg:


From these pictures, Evolution Slingshock is in it's first awakening already (not complete rubber flat, but more spikes than unawakened).  The blue plastic is nice and clear on the Balar layer as well.  Wolborg and Driger F also look nice, and hopefully we see Treptune soon as well.  Here are the links to the products:
https://www.walmart.com/ip/Beyblade-Burs.../466633507
https://www.walmart.com/ip/Beyblade-Burs.../448649238
https://www.walmart.com/ip/Beyblade-Burs.../589435605

Driger F and Wolborg look good. Has Hasbro released any other F's?

---

Managed to find some pictures of the new Balar B4, Driger F and Wolborg (hopefully we see the Treptune pictures soon as well).
*snip*

From these pictures, Evolution Slingshock is in it's first awakening already (not complete rubber flat, but more spikes than unawakened).  The blue plastic is nice and clear on the Balar layer as well.  Wolborg and Driger F also look nice, and hopefully we see Treptune soon as well.  Here are the links to the products:
https://www.walmart.com/ip/Beyblade-Burs.../466633507
https://www.walmart.com/ip/Beyblade-Burs.../448649238
https://www.walmart.com/ip/Beyblade-Burs.../589435605

Driger F and Wolborg look good. Has Hasbro released any other F's?

Hasbro released Dranzer F and Dragoon F a while ago in Evolution, and remade them as other Slingshock beys. Draciel F will be a hypersphere release at some point.

So since Kerbeus is now appearing, Devolos should be coming very soon.

---

Also tbh, the new Balar recolor looks much better than the original.

---

Feel free to subscribe to my Beyblade channel on YouTube!: https://www.youtube.com/channel/UCSKpJJz...w/featured

So since Kerbeus is now appearing, Devolos should be coming very soon.

---

Also tbh, the new Balar recolor looks much better than the original.

I actually found Master Devolos today at my local Target, along with Shield Kerbeus.  They should be showing up soon at every Target.