Wow, these are amazing! We have some real talented creators here!

---

I mean in a way where the lock mechanism of the gear won't release before the battle while and after it gets winded up and before the bey is launched.

OHK<
The Prongs release the spring when the bey is really slow spinning, because those are huge, and easier for centrifugal force to pull it.



And, I am accepting commissions if anyone Want's a Gimmicky bey, Since other than remakes, My all beys have gimmicks

TO Adarsh Abhinav

https://imgur.com/a/f9pzQQq

Can you make this into a burst bey?

Gimmick: Supports Level Chip, god chip and The outermost 3 "Fins" are made of rubber or metal.
If so, Thanks.

Btw this is left spin

---

haha animated pfp go brrrrr

god this FE6 sage sprite is amazing

My nickname is "Ink"/"Inkscape"

im an aspiring artist and beyblade enthusiast

i like burning kerberous a little TOO much

Team Leader of the Galeon Spark Knights!

Crazy Aries does not accept requests.

---

Adarsh Abhinav might help you. But if not I could try.

I already show this to another thread wait.....

OHK<
The Prongs release the spring when the bey is really slow spinning, because those are huge, and easier for centrifugal force to pull it.



And, I am accepting commissions if anyone Want's a Gimmicky bey, Since other than remakes, My all beys have gimmicks

https://imgur.com/a/f9pzQQq

Can you make this into a burst bey?

Gimmick: Supports Level Chip / The "Fins" are made of rubber
If so, Thanks.

Yes I think it is possible, get/make a model of the outer ring, then put onto a model of a beyblade burst template. As for the rubber, you would need a printer that can print TPE'S which can substitute for rubber because you need a mould for rubber.

How in salmander? U guys r such geeks....

---

How in salmander? U guys r such geeks....

How in salmander? U guys r such geeks....

---

How in salmander? U guys r such geeks....

Can you stop being rude to the people on the WBO?

---

oh no i just woke up and two years have passed where am i what happened

How in salmander? U guys r such geeks....

---

Can you stop being rude to the people  on the WBO?

Hey some ppl r geeks and some aren't ok?! -Avery

Can you stop being rude to the people  on the WBO?

Hey some ppl r geeks and some aren't ok?! -Avery

Okay, but it still is unkind to call them that

---

oh no i just woke up and two years have passed where am i what happened

Can you stop being rude to the people  on the WBO?

Hey some ppl r geeks and some aren't ok?! -Avery

Like Dt20000 said Stop being rude, The WBO is welcome to Beyblade fans, so stop calling the people here geeks.

---

Every place feels mysterious, yet is somehow the same. Every time I wake up I shiver with fear for what new nightmare awaits. Each departure from the campfire is into confusion. Slowly I learn the different places, recognising features and buildings but I never really understand the pattern. As if some powerful force is shuffling the world as if we were a deck of cards. Maybe we are just pawns on a scrabble board?

Hey some ppl r geeks and some aren't ok?! -Avery

Okay, but it still is unkind to call them that

I see ur point srry. -Avery

Hey I actually have a beyblade that has a special gimic that is it’s own not coppied and id like to get some feedback on the design

I have a fake salamander that spins right and I need it to spin left. Is there any 3d models that has the parts that I need to replace.

Crazy Aries does not accept requests.

---

Adarsh Abhinav  might help you. But if not I could try.

When i wrote this I knew such a thing. Thats why I quoted Adarsh.

---

haha animated pfp go brrrrr

god this FE6 sage sprite is amazing

My nickname is "Ink"/"Inkscape"

im an aspiring artist and beyblade enthusiast

i like burning kerberous a little TOO much

Team Leader of the Galeon Spark Knights!

I have a fake salamander that spins right and I need it to spin left. Is there any 3d models that has the parts that I need to replace.

just mirror it.
https://www.thingiverse.com/thing:2832731 or mirror this and combine them.

I know CrazyAries doesn't accept requests but I am new to making 3d printed beys. I just wanted to know if this would be a good bey in battle. It's a prototype so it's not ready yet.

---

I know CrazyAries doesn't accept requests but I am new to making 3d printed beys. I just wanted to know if this would be a good bey in battle. It's a prototype so it's not ready yet.

https://www.tinkercad.com/things/aGrmron...stom-burst

I know CrazyAries doesn't accept requests but I am new to making 3d printed beys. I just wanted to know if this would be a good bey in battle. It's a prototype so it's not ready yet.

---

I know CrazyAries doesn't accept requests but I am new to making 3d printed beys. I just wanted to know if this would be a good bey in battle. It's a prototype so it's not ready yet.

https://www.tinkercad.com/things/aGrmron...stom-burst

its an ok start, but if you were to use this kind of design then yes you have a strong attack, but it would also slow down much faster due to each hit, it would also be susceptible to breaking faster on the point of contact, I would either suggest you make it an 8 edged layer, or if you wanted to keep it 4 prongs, to simple round them off and pull them into the main body a bit more, though it is first draft, it has its ups and down, come up with a few alternative designs and see how they compare.

it might also be an idea to look at some older beys for ideas, the plastic gen had many beys with similar idea to yours that had alternate version that either hindered or fixed any issues, this is only a suggestion after all, so you can do as you freely want

---

if your respectful to Me, then Il do the same and be respectful to you.

there is no such thing as perfection, for with out flaws we can not improve.

I know CrazyAries doesn't accept requests but I am new to making 3d printed beys. I just wanted to know if this would be a good bey in battle. It's a prototype so it's not ready yet.

---

https://www.tinkercad.com/things/aGrmron...stom-burst

its an ok start, but if you were to use this kind of design then yes you have a strong attack, but it would also slow down much faster due to each hit, it would also be susceptible to breaking faster on the point of contact, I would either suggest you make it an 8 edged layer, or if you wanted to keep it 4 prongs, to simple round them off and pull them into the main body a bit more, though it is first draft, it has its ups and down, come up with a few alternative designs and see how they compare.

it might also be an idea to look at some older beys for ideas, the plastic gen had many beys with similar idea to yours that had alternate version that either hindered or fixed any issues, this is only a suggestion after all, so you can do as you freely want

Thanks, any other tips?

---

its an ok start, but if you were to use this kind of design then yes you have a strong attack, but it would also slow down much faster due to each hit, it would also be susceptible to breaking faster on the point of contact, I would either suggest you make it an 8 edged layer, or if you wanted to keep it 4 prongs, to simple round them off and pull them into the main body a bit more, though it is first draft, it has its ups and down, come up with a few alternative designs and see how they compare.

it might also be an idea to look at some older beys for ideas, the plastic gen had many beys with similar idea to yours that had alternate version that either hindered or fixed any issues, this is only a suggestion after all, so you can do as you freely want

Thanks, any other tips?

I'm trying to make a stamina type bey so do you know how to make it effective?

---

I created my own custom bey! I wanted to share it to see what you guys think. If you use this, can you please give me credit? thanks!
https://www.tinkercad.com/things/aGrmronJwk1-sky-knight-custom-burst

So the Cosmic Odin is basically completed.
I surrently use brass, which is a copper alloy and is very heavy so it can be more than 30 grams... I may make another aluminium version...

Layer-Cosmic Odin (cO) 

Spoiler (Click to View)

Super Z Ability: Slash Breaker

There are two parts of this layer, which is cO1 and cO2, and both would be necessary.
If you want to make everything easy, you can directly 3D print both parts.
And if you want it to be more competitive and you have access to metal manufacture such as CNC, you can make the cO2 metal. 2 screws are need to assemble the layer. And you can also try some different material such as rubber, which may result in different performance.
Warning: The cO2 could be super heavy if you make it metal, and it might damage other layers. I suggest you to make it plastic or some light metal such as aluminum.

Disc-Xplode

Spoiler (Click to View)

Estimated Weight: 23g
You will need metal manufacture to complete this disc. And the .stp file is necessary for this.

Driver-Kinetic

Spoiler (Click to View)

There are 4 files to make this driver. The tip(Kn4) is Rubber but you can make it plastic. You will need a M2*5 screw to assemble it.
You need to get the white ring and the spring from another driver. This may totally destroy that driver.
Also, you would need another two M2*8 screws to finally complete this driver.

Download

---

So the Cosmic Odin is basically completed.
I surrently use brass, which is a copper alloy and is very heavy so it can be more than 30 grams... I may make another aluminium version...

Layer-Cosmic Odin (cO) 

Spoiler (Click to View)

Super Z Ability: Slash Breaker

There are two parts of this layer, which is cO1 and cO2, and both would be necessary.
If you want to make everything easy, you can directly 3D print both parts.
And if you want it to be more competitive and you have access to metal manufacture such as CNC, you can make the cO2 metal. 2 screws are need to assemble the layer. And you can also try some different material such as rubber, which may result in different performance.
Warning: The cO2 could be super heavy if you make it metal, and it might damage other layers. I suggest you to make it plastic or some light metal such as aluminum.

Disc-Xplode

Spoiler (Click to View)

Estimated Weight: 23g
You will need metal manufacture to complete this disc. And the .stp file is necessary for this.

Driver-Kinetic

Spoiler (Click to View)

There are 4 files to make this driver. The tip(Kn4) is Rubber but you can make it plastic. You will need a M2*5 screw to assemble it.
You need to get the white ring and the spring from another driver. This may totally destroy that driver.
Also, you would need another two M2*8 screws to finally complete this driver.

Download

---

If I paid you could you make me one and I would pay you a little extra for your time and effort to make the super z ability bayblade

So the Cosmic Odin is basically completed.
I surrently use brass, which is a copper alloy and is very heavy so it can be more than 30 grams... I may make another aluminium version...

Layer-Cosmic Odin (cO) 

Spoiler (Click to View)

Super Z Ability: Slash Breaker

There are two parts of this layer, which is cO1 and cO2, and both would be necessary.
If you want to make everything easy, you can directly 3D print both parts.
And if you want it to be more competitive and you have access to metal manufacture such as CNC, you can make the cO2 metal. 2 screws are need to assemble the layer. And you can also try some different material such as rubber, which may result in different performance.
Warning: The cO2 could be super heavy if you make it metal, and it might damage other layers. I suggest you to make it plastic or some light metal such as aluminum.

Disc-Xplode

Spoiler (Click to View)

Estimated Weight: 23g
You will need metal manufacture to complete this disc. And the .stp file is necessary for this.

Driver-Kinetic

Spoiler (Click to View)

There are 4 files to make this driver. The tip(Kn4) is Rubber but you can make it plastic. You will need a M2*5 screw to assemble it.
You need to get the white ring and the spring from another driver. This may totally destroy that driver.
Also, you would need another two M2*8 screws to finally complete this driver.

Download

---

So the Cosmic Odin is basically completed.
I surrently use brass, which is a copper alloy and is very heavy so it can be more than 30 grams... I may make another aluminium version...

Layer-Cosmic Odin (cO) 

Spoiler (Click to View)

Super Z Ability: Slash Breaker

There are two parts of this layer, which is cO1 and cO2, and both would be necessary.
If you want to make everything easy, you can directly 3D print both parts.
And if you want it to be more competitive and you have access to metal manufacture such as CNC, you can make the cO2 metal. 2 screws are need to assemble the layer. And you can also try some different material such as rubber, which may result in different performance.
Warning: The cO2 could be super heavy if you make it metal, and it might damage other layers. I suggest you to make it plastic or some light metal such as aluminum.

Disc-Xplode

Spoiler (Click to View)

Estimated Weight: 23g
You will need metal manufacture to complete this disc. And the .stp file is necessary for this.

Driver-Kinetic

Spoiler (Click to View)

There are 4 files to make this driver. The tip(Kn4) is Rubber but you can make it plastic. You will need a M2*5 screw to assemble it.
You need to get the white ring and the spring from another driver. This may totally destroy that driver.
Also, you would need another two M2*8 screws to finally complete this driver.

Download

---

If I paid you could you make me one and I would pay you a little extra for your time and effort to make the super z ability bayblade

The purpose of this thread is for @[CrazyAries] to put out designs we can print for free. The OP specifically mentioned that he wasn't doing commissions, and instead would make said free designs for us in place of that.

---

Hi! I've been on and off this site for a while now, but if you're new or just seeing this I hope you enjoy your stay on the WBO.

I can not get the file to get it printed that y I ask

---

And I have no clue how to get it made

I can not get the file to get it printed that y I ask

---

And I have no clue how to get it made

My bad...Sorry about the misunderstanding.

Have you tried downloading the file and using a printing company like Shapeways?

---

Hi! I've been on and off this site for a while now, but if you're new or just seeing this I hope you enjoy your stay on the WBO.

its an ok start, but if you were to use this kind of design then yes you have a strong attack, but it would also slow down much faster due to each hit, it would also be susceptible to breaking faster on the point of contact, I would either suggest you make it an 8 edged layer, or if you wanted to keep it 4 prongs, to simple round them off and pull them into the main body a bit more, though it is first draft, it has its ups and down, come up with a few alternative designs and see how they compare.

it might also be an idea to look at some older beys for ideas, the plastic gen had many beys with similar idea to yours that had alternate version that either hindered or fixed any issues, this is only a suggestion after all, so you can do as you freely want

Thanks, any other tips?

---

Thanks, any other tips?

I'm trying to make a stamina type bey so do you know how to make it effective?

---

I created my own custom bey! I wanted to share it to see what you guys think. If you use this, can you please give me credit? thanks!
https://www.tinkercad.com/things/aGrmron...stom-burst

from the looks of it you have a good base for a stamina, but the layer only does so much when it comes to stamina, its more the driver/tip you use, like bearing or revolve, they keep the bey spinning for a bit longer, to maybe use a ball tipped driver, or a sharp,

---

if your respectful to Me, then Il do the same and be respectful to you.

there is no such thing as perfection, for with out flaws we can not improve.

Thanks, any other tips?

---

I'm trying to make a stamina type bey so do you know how to make it effective?

---

I created my own custom bey! I wanted to share it to see what you guys think. If you use this, can you please give me credit? thanks!
https://www.tinkercad.com/things/aGrmron...stom-burst

from the looks of it you have a good base for a stamina, but the layer only does so much when it comes to stamina, its more the driver/tip you use, like bearing or revolve, they keep the bey spinning for a bit longer, to maybe use a ball tipped driver, or a sharp,

Thanks!

Another Anime character Beyblade (I may work on several more Anime beys because I don't need to worry about the name XD)
Accelerator.00W.Rf

Introduction:

Spoiler (Click to View)

This is a defense type beyblade. The gimmick is that it has two kind of wings made of different material. The black wing is made of tough plastic, with edged shape, so that it could fight back when opponent attack. And the white wing is made of rubber, which can absorb the impact (because this bey can only spin clockwise, no spin-steal function it has although there is rubber)

And the Driver is like Fusion + Press, that a sharp tip at the center with some claws around. It could catch the stadium to improve KO resistance.

Disc and Frame are just regular released parts. You may also use any other parts you like.

Video:

Spoiler (Click to View)

More pic:

Spoiler (Click to View)

Download 3D files

---