A new Layer design.
This is a defense type Layer called Halo Aurora.
It has springs to hold a ring which can absorb the impact and protect the bey.
(I am not sure if there would be any issue on this gimmick since I am in school now and recently I may not make these parts I designed to see if they work well.)

There is a metal part on this pic, but you can make it plastic or any material you like.
Cho Z(if metal)/God(if no metal) ability: Halo Shield
5 springs would be needed for this layer. You may get these springs from some retractable pens if you don't know where to buy springs. But remember, don't waste your pens on this layer, please make sure that the pen you take springs from have used up the ink!
File download

---

BTW, Don't make the outer ring metal! That part is not fixed so that it could make the bey very unstable if that is too heavy!

ok, now this is kinda cool, like a static sub attack ring, or a static version of zeus from plastic gen

---

if your respectful to Me, then Il do the same and be respectful to you.

there is no such thing as perfection, for with out flaws we can not improve.

Did you even think of designing some kind of "omni-driver" that can be attached to different kinds of driver pieces CrazyAries? I asked this because if I'm correct, all your 3D printed drivers required a white piece and a spring from another driver. While some people can just buy multiple of a common driver in bulk to disassemble, some people(like me) don't have the option to do that and we may prefer to only disassemble as few drivers as we want or only have to disassemble one. Some people may even salvage the red piece and the thicker spring of a dash (') driver since they can afford to disassemble one if they have more than one of the same dash driver.

Mutliple Parts Driver, I have made one that can use MFb tips. While I use Fakes for spring and plastic part- purpose, as they are easy to open and cheap.

---

A new Layer design.
This is a defense type Layer called Halo Aurora.
It has springs to hold a ring which can absorb the impact and protect the bey.
(I am not sure if there would be any issue on this gimmick since I am in school now and recently I may not make these parts I designed to see if they work well.)

There is a metal part on this pic, but you can make it plastic or any material you like.
Cho Z(if metal)/God(if no metal) ability: Halo Shield
5 springs would be needed for this layer. You may get these springs from some retractable pens if you don't know where to buy springs. But remember, don't waste your pens on this layer, please make sure that the pen you take springs from have used up the ink!
File download

---

BTW, Don't make the outer ring metal! That part is not fixed so that it could make the bey very unstable if that is too heavy!

ok, now this is kinda cool, like a static sub attack ring, or a static version of zeus from plastic gen

Also, I don't know if some people who get their hands on this layer are going to be waiting until they have 5 used pens to assemble the layer. I know I won't.

---

Mutliple Parts Driver, I have made one that can use MFb tips. While I use Fakes for spring and plastic part- purpose, as they are easy to open and cheap.

I don't think that the "omni-driver" should use MFB tips because some there some people who don't have a bunch of MFB parts laying around. A version that does use MFB could be nice for people who have MFB parts, but I think a "omni-driver" that is compatible with tips pieces made for it can be useful for more people since it won’t required parts from a previous generation to be of use.

---

Mutliple Parts Driver, I have made one that can use MFb tips. While I use Fakes for spring and plastic part- purpose, as they are easy to open and cheap.

I don't think that the "omni-driver" should use MFB tips because some there some people who don't have a bunch of MFB parts laying around. A version that does use MFB could be nice for people who have MFB parts, but I think a "omni-driver" that is compatible with tips pieces made for it can be useful for more people since it won’t required parts from a previous generation to be of use.

We can even Create our own MFB tips, how does that sounds

---

---

I don't think that the "omni-driver" should use MFB tips because some there some people who don't have a bunch of MFB parts laying around. A version that does use MFB could be nice for people who have MFB parts, but I think a "omni-driver" that is compatible with tips pieces made for it can be useful for more people since it won’t required parts from a previous generation to be of use.

We can even Create our own MFB tips, how does that sounds

That may be ok but I prefer that omni (short for omni-driver) uses driver pieces made for it over MFB tips because I feel like that a MFB driver can be easily made as you basically just need to change out the bottom piece of a driver out with a 3D printed MFB adapter piece. Secondly while yes we could create our own MFB tips, I feel that it would be difficult to make tips with certain gimmicks without getting having to go as far as making a 4D tip, which also can have a adapter made for those kinds of tips. Thirdly, while yes, it's cool to make a bey that uses parts from different generations, sometimes I prefer just to keep it simple and not use a MFB part on a burst bey. Lastly, the reason I gave the suggestion of a omni-driver is because I like the drivers CrazyAries made but if I get two or more of them and only got one white piece and only one spring, I don't want to take apart the drivers and put them back together just so I can use a different  driver.

---

Also I don't want to use the pieces from fake drivers because I don't want to buy fakes in the first. I rather get the pieces from drivers that are very common like the accel from the black valtreyex that comes with a beylocker.

You can also buy the spring in amazon if that the one part you need from the fake beys , i do it all the time for my mods

You can also buy the spring in amazon if that the one part you need from the fake beys , i do it all the time for my mods

The piece that the spring pushes up is also needed because it's extremely hard to make.

You can also buy the spring in amazon if that the one part you need from the fake beys , i do it all the time for my mods

The piece that the spring pushes up is also needed because it's extremely hard to make.

Is the white piece too small to scan to make a 3D model with it?

---

You can also buy the spring in amazon if that the one part you need from the fake beys , i do it all the time for my mods

Can you post a link to it?

The piece that the spring pushes up is also needed because it's extremely hard to make.

Is the white piece too small to scan to make a 3D model with it?

---

You can also buy the spring in amazon if that the one part you need from the fake beys , i do it all the time for my mods

Can you post a link to it?

Prime-Line Products SP 9706 Spring, Compression, 1/2-Inch  by 1-1/2-Inch  - .041 Diameter,(Pack of 2) https://www.amazon.com/dp/B008RG3P7E/ref...QBbP9JPEHG

This is a size you can work with but i recomend you to look for one that fits the use ur gonna give it

Btw the are some that are a little bit sturdier if you wanna do something like xtreme'

The piece that the spring pushes up is also needed because it's extremely hard to make.

Is the white piece too small to scan to make a 3D model with it?

---

You can also buy the spring in amazon if that the one part you need from the fake beys , i do it all the time for my mods

Can you post a link to it?

I think that the white piece requires extreme precision to make, since the two little teeth can either be to big and make it impossible to use with a layer, or too small, resulting in horrible burst resistance.

Is the white piece too small to scan to make a 3D model with it?

---

Can you post a link to it?

Prime-Line Products SP 9706 Spring, Compression, 1/2-Inch  by 1-1/2-Inch  - .041 Diameter,(Pack of 2) https://www.amazon.com/dp/B008RG3P7E/ref...QBbP9JPEHG

This is a size you can work with but i recomend you to look for one that fits the use ur gonna give it

Btw the are some that are a little bit sturdier if you wanna do something like xtreme'

Ok, can you post a link to that as well?

Guy instead of invading this thread i would create a new one focused on Burst Mods where i will post my latest mod and we can discuss things like this

Guy instead of invading this thread i would create a new one focused on Burst Mods where i will post my latest mod and we can discuss things like this

They're discussing a way to get a spring better than the fakes' springs for the 3D drivers. There is nothing off-topic about that.

Doed anybody needs 3D model for LR PROTO?
A MADE ONE, sadly my school is Close for me due to exams of kids, so I cannot test it right now.

I also made a Adapt driver, MFB Spin Track it is, yeah not tested yet

---

sounds interesting, Id like to see them, sadly I cant test the parts either, heck I cant even test my own layer

---

if your respectful to Me, then Il do the same and be respectful to you.

there is no such thing as perfection, for with out flaws we can not improve.

I made a design for a balance type named Kalta Drogon cause my initials are DK so can anyone help me turn it into a 3d model for me to print off?

The picture with description https://www.deviantart.com/mcgamemaster/...-766177789

The picture without the description https://www.deviantart.com/mcgamemaster/...-766248646

I made a design for a balance type named Kalta Drogon cause my initials are DK so can anyone help me turn it into a 3d model for me to print off?

The picture with description https://www.deviantart.com/mcgamemaster/...-766177789

The picture without the description https://www.deviantart.com/mcgamemaster/...-766248646

not bad, but I think it would wobble too much

---

if your respectful to Me, then Il do the same and be respectful to you.

there is no such thing as perfection, for with out flaws we can not improve.

I don't mean to be offensive but it did take me 2 days to come up with that design.

I made a design for a balance type named Kalta Drogon cause my initials are DK so can anyone help me turn it into a 3d model for me to print off?

The picture with description https://www.deviantart.com/mcgamemaster/...-766177789

The picture without the description https://www.deviantart.com/mcgamemaster/...-766248646

I can probably help you out there. I've made some beys for people, so i can most likely make yours.

---

I'm ready for any challenge! Bring them all on!
Check out my Wattpad for some stories i'll be writing soon!
https://www.wattpad.com/user/StormBringerBoy

really that would be so awesome dude

I made something.....

It's called Wind Eagle, And the layer is very Complex....
[Image: zvafjt.png]

[Image: 25euqdh.png]

---

Download

---

looks like you based the design off of nightmare luinor

looks like you based the design off of nightmare luinor

Wasn't seeing that design anyware so made it

---

you are right about that it was only used once and then not one more like it since