Is their anyone that can design a burst layer for me please ???? It would mean a lot to get sum help to get my own layer made
but if u can help out or know anyone who can lmk

If you could describe how you want the layer to be then, @[CrazyAries] is just the man for this job! He is incredible at designing layers and I am pretty sure that he will help you.

The reason this thread exists is because he doesn't have the time to fulfill everyone's requests. That was the first post

---

~Thunder

Now I am working on the nest bey. It is an evolution of Odin and I call it Cosmic Odin (abbreviated as cO).
Also, I will use a new disc and driver just like the remake of Earth Aquila.
It will be Coamic Odin. Xplode. Kinetic (cO.X.Kn).
(Maybe I will post then next week or the week after next? recently I got an internship so I don't have so much time)

---

Now I am working on the nest bey. It is an evolution of Odin and I call it Cosmic Odin (abbreviated as cO).
Also, I will use a new disc and driver just like the remake of Earth Aquila.
It will be Coamic Odin. Xplode. Kinetic (cO.X.Kn).
(Maybe I will post then next week or the week after next? recently I got an internship so I don't have so much time)

Sounds cool. I hope your internship turns out well.

---

Highly Observant Hasbro Blader.

---

Now I am working on the nest bey. It is an evolution of Odin and I call it Cosmic Odin (abbreviated as cO).
Also, I will use a new disc and driver just like the remake of Earth Aquila.
It will be Coamic Odin. Xplode. Kinetic (cO.X.Kn).
(Maybe I will post then next week or the week after next? recently I got an internship so I don't have so much time)

is it god layer or cho-z layer?

Now I am working on the nest bey. It is an evolution of Odin and I call it Cosmic Odin (abbreviated as cO).
Also, I will use a new disc and driver just like the remake of Earth Aquila.
It will be Coamic Odin. Xplode. Kinetic (cO.X.Kn).
(Maybe I will post then next week or the week after next? recently I got an internship so I don't have so much time)

is it god layer or cho-z layer?

Cho-Z. But you can make it Plastic, that should still work.

---

Now I am working on the nest bey. It is an evolution of Odin and I call it Cosmic Odin (abbreviated as cO).
Also, I will use a new disc and driver just like the remake of Earth Aquila.
It will be Coamic Odin. Xplode. Kinetic (cO.X.Kn).
(Maybe I will post then next week or the week after next? recently I got an internship so I don't have so much time)

Sounds awesome, looking forward to it, your stuff is really great and good luck on the internship, I know how busy life can get.

---

My YouTube Channel 
My Facebook Page

is it god layer or cho-z layer?

Cho-Z. But you can make it Plastic, that should still work.

Oooh will it be level chip compatible?

---

~Thunder

Cho-Z. But you can make it Plastic, that should still work.

Oooh will it be level chip compatible?

Oops... I forgot it...

---

If possible can u or someone make 3d printable dranzer f layer (designed similar to burst ver)?

---

Fav cho-Z combos
[\spoiler]
cR with A level chip 7 Revolve
rP with A level chip 10 Cross Atomic
zA with A level chip 0 Bump Destroy
hS with A level chip 7 Glaive Bearing
vL with A level chip 0 Reach Jolt
bL with A level chip 0 Glaive Variable(worn)

Cool wish I. Could do it. Its a shame I dont know 3d modeling

Cool wish I. Could do it. Its a shame I dont know 3d modeling

Me too i am planning on learning it tho

---

Fav cho-Z combos
[\spoiler]
cR with A level chip 7 Revolve
rP with A level chip 10 Cross Atomic
zA with A level chip 0 Bump Destroy
hS with A level chip 7 Glaive Bearing
vL with A level chip 0 Reach Jolt
bL with A level chip 0 Glaive Variable(worn)

Cool wish I. Could do it. Its a shame I dont know 3d modeling

Me too i am planning on learning it tho

I wish there was a burst version of Pegasus

What website did you use to make the design for the bey

I have just complete the layer, but unfortunately I made this layer too heavy... I think I need to change the metal (Perhaps Aluminum alloy or something lighter), or I need to redo the design from the beginning.

---

I have just complete the layer, but unfortunately I made this layer too heavy... I think I need to change the metal (Perhaps Aluminum alloy or something lighter), or I need to redo the design from the beginning.

the heavier the better.

I have just complete the layer, but unfortunately I made this layer too heavy... I think I need to change the metal (Perhaps Aluminum alloy or something lighter), or I need to redo the design from the beginning.

the heavier the better.

If it's too heavy it could damage the launcher

---

~Thunder

I have just complete the layer, but unfortunately I made this layer too heavy... I think I need to change the metal (Perhaps Aluminum alloy or something lighter), or I need to redo the design from the beginning.

the heavier the better.

In the case of performance, that's right. But I don't really want it to be overpowered and totally break the balance in metagame (although it is just a custom beyblade).

---

speaking of which how heavy is it with steel?

speaking of which how heavy is it with steel?

Well... It is about 30 grams...

---

speaking of which how heavy is it with steel?

Well... It is about 30 grams...

Woah! 30 grams?

So the Cosmic Odin is basically completed.
I surrently use brass, which is a copper alloy and is very heavy so it can be more than 30 grams... I may make another aluminium version...

Layer-Cosmic Odin (cO) 

Spoiler (Click to View)

Super Z Ability: Slash Breaker

There are two parts of this layer, which is cO1 and cO2, and both would be necessary.
If you want to make everything easy, you can directly 3D print both parts.
And if you want it to be more competitive and you have access to metal manufacture such as CNC, you can make the cO2 metal. 2 screws are need to assemble the layer. And you can also try some different material such as rubber, which may result in different performance.
Warning: The cO2 could be super heavy if you make it metal, and it might damage other layers. I suggest you to make it plastic or some light metal such as aluminum.

Disc-Xplode

Spoiler (Click to View)

Estimated Weight: 23g
You will need metal manufacture to complete this disc. And the .stp file is necessary for this.

Driver-Kinetic

Spoiler (Click to View)

There are 4 files to make this driver. The tip(Kn4) is Rubber but you can make it plastic. You will need a M2*5 screw to assemble it.
You need to get the white ring and the spring from another driver. This may totally destroy that driver.
Also, you would need another two M2*8 screws to finally complete this driver.

Download

---

Good job. I especially like kinetic

---

Highly Observant Hasbro Blader.

---

Yooo this blade is siiiiiiicc CrazyAries frmy hats off to u dude ??????

Has anyone tested these out? O2 is my favorite Dual Layer, and this design makes it even cooler!

Has anyone tested these out? O2 is my favorite Dual Layer, and this design makes it even cooler!

It literally came out last night

---

~Thunder