trueblader Wrote:you know this is supposed to be a creative atmosphere, can we get some more creative criticism and less destructive criticism please, so people can have help formulating their ideas.
Sorry, it's just...wave defenders? Full-magnet beyblades? That's just craziness.
If you want constructive critism, here's mine on the Full-Magnet Blades:
Those would really only work if they were so balanced and endurant that they wouldn't immediately stop spinning upon being thrusted away or towards another Beyblade. The Magnacore worked because the magnet was small and centered in the beyblade, but having a full-magnet beyblade with one side North and one side South is just...too unbalanced.
If they had a strong center of balance, then they may not KO themselves and may work, but they'd have to have superior balance.
ok, i see what you mean so i won't pitch any more crazy ideas. however i do have one last thing to go with the full magnet beyblades, if the blades were full magnet they could make some much more creative stadiums. like a double decker stadium that has an elevator like mechanism and when the blade enters it the stadium senses the magnetic field and moves the elevator up or down. to stop the blade from hitting the sides of the elevator there would be magnets on those sides repelling the blade to the middle of the elevator so it could go up or down safely
trueblader Wrote:you know this is supposed to be a creative atmosphere, can we get some more creative criticism and less destructive criticism please, so people can have help formulating their ideas.
If you propose an idea that doesn't make sense, people are allowed to shoot it down.
trueblader Wrote:ok, i see what you mean so i won't pitch any more crazy ideas. however i do have one last thing to go with the full magnet beyblades, if the blades were full magnet they could make some much more creative stadiums. like a double decker stadium that has an elevator like mechanism and when the blade enters it the stadium senses the magnetic field a moves the elevator up or down. to stop the blade from hitting the sides of the elevator there would be magnets on those sides repelling the blade to the middle of the elevator so it could go up safely
Hmm...well, they Beyblades would have to have incredible stamina.
I think, instead of a full-magnet beyblade, a full-
magnetic beyblade would be better.
No, wait, then the Beyblades would always be rooted to a magnet in a magnetic stadium...
Okay then: A full magnetic beyblade that had a North-polarity magnet inside, about the size of the Magnacore. How about that? No beyblade would be rooted in place, and the battles would be fiercer.
The beyblades wouldn't lose spin as drastically because the Beyblades themselves wouldn't be magnets, they'd just have magnets inside of them. It could be, like, Magnacore 2, or Magnacore +.
...
members: Would that work?
Bey Brad Wrote:trueblader Wrote:you know this is supposed to be a creative atmosphere, can we get some more creative criticism and less destructive criticism please, so people can have help formulating their ideas.
If you propose an idea that doesn't make sense, people are allowed to shoot it down.
Yes they are, but that does not mean that they couldn't give suggestions on how to make it better or something.
trueblader Wrote:Bey Brad Wrote:trueblader Wrote:you know this is supposed to be a creative atmosphere, can we get some more creative criticism and less destructive criticism please, so people can have help formulating their ideas.
If you propose an idea that doesn't make sense, people are allowed to shoot it down.
Bes they are, but that does not mean that they couldn't give suggestions on how to make it better or something.
Some ideas are just inherently flawed, you know?
Bey Brad Wrote:No magnets. D:
Why not? Because they've been used already, or because they were useless?
Grey Wrote:Bey Brad Wrote:No magnets. D:
Why not? Because they've been used already, or because they were useless?
I just don't really think they're a good idea.
On to ideas that I think
are good, I think an EG concept that made the AR/Wheel spin faster, rather than the tip, could be really cool.
HMC-like Bottom or Track!
Would there be any way to effectively combine an engine gear with a bearing tip beyblade?
My idea would be that as the beyblade loses spin/balance, the gear kicks in, and gives it enough extra spin to outlast the other blade.
Would be really effective as a spin stealer. I don't see how this would work good though.
Bey Brad Wrote:Grey Wrote:Bey Brad Wrote:No magnets. D:
Why not? Because they've been used already, or because they were useless?
I just don't really think they're a good idea.
On to ideas that I think are good, I think an EG concept that made the AR/Wheel spin faster, rather than the tip, could be really cool.
Hmm...Do you mean just the Wheel or the entire Beyblade? I would think the entire Beyblade, since the wheel would need to be free-spinning...
EDIT: Also, an EG concept that could fit into ANY MFB. That'd be cool (or would it be impossible?).
But, umm (*cough*), yeah, a full-blade EG would be a big improvement on the previous Engine Gear system.
... how would a "full" EG blade even work?
Bey Brad Wrote:... how would a "full" EG blade even work?
I dunno, the engine is set off and spins the entire Beyblade, instead of the tip.
...
Wait, oops.
A wheel that is a miniature version of Metal Driger's AR but has 8 of the big things, not the little triangles.
Gotruto Wrote:A wheel that is a miniature version of Metal Driger's AR but has 8 of the big things, not the little triangles.
...so an 8 Spike, more or less?
the track would have to be redesigned from the ground up to incorporate an engine. As for the full engine gear blade I personally don't think it is impossible. Alot of time, money, reseach and resources would have to go in to making it work, and i highly doubt that takara would really invest so much in that, not that it's a bad idea though, it's a great idea it would just be to much trouble and money for takara.
Yah, i guess, but it would have a longer range than Dragoon G's AR if it was plastic size, so yah 8-Spike
Gotruto Wrote:Yah, i guess, but it would have a longer range than Dragoon G's AR if it was plastic size, so yah 8-Spike
Thing is, I don't know if this is even functional: Since the beyblade is smaller, there would be less room for the eight spikes, and chances are, they'd be rather thin. :\
I think an AR with a wave-like shape could be cool. Like this:
To you think it's possible to add shock-absorbing panels to a Wheel, sort of like the diagram below?
[Image: shockabsorbvo1.png]
The idea is that the spring-loaded panels will absorb some or all of the force of an attacking beyblade hit, allowing the blade to stand its ground.
I think that's a really cool idea, Doom.
Doompenguin Wrote:To you think it's possible to add shock-absorbing panels to a Wheel, sort of like the diagram below?
[Image: shockabsorbvo1.png]
The idea is that the spring-loaded panels will absorb some or all of the force of an attacking beyblade hit, allowing the blade to stand its ground.
that's a great idea, but wouldn't only work for defensive blades, i mean imagine two blades battling with those trying to atrack one another and they are just bouncing off eachother like sumo wrestlers.
trueblader Wrote:Doompenguin Wrote:To you think it's possible to add shock-absorbing panels to a Wheel, sort of like the diagram below?
[Image: shockabsorbvo1.png]
The idea is that the spring-loaded panels will absorb some or all of the force of an attacking beyblade hit, allowing the blade to stand its ground.
that's a great idea, but wouldn't only work for defensive blades, i mean imagine two blades battling with those trying to atrack one another and they are just bouncing off eachother like sumo wrestlers.
The idea is for Defensive Beyblades, of course ...
