(Dec. 15, 2018 5:32 PM)BeyCrafter Wrote:Oof(In a good way). Maybe that's why TT doesn't include Br in Rbv.(Dec. 15, 2018 5:29 PM)Infinite.Zero Wrote: What is a Bearing tab?
I believe he means the tabs that hold the ball bearing in place on the Bearing driver. Apparently the Revive Armour can damage it.
Whine about your breaks
The tabs I am referring to are the 4 plastic shields that surround the metal bearing . rP s gimmick metal teeth reach in and snap!
A while back before I joined WBO my Legend Spriggan ( Which was my favourite bey in my collection) got cracked right by where one of the heads were 
Bearing in general is fragile, which is good enough reason not to put it in cramped Random Booster packaging. Heck, I got Hasbro's Caynox C3, and its Bearing driver had a bent shaft in the sturdy plastic packaging. If it can bend in that, no way is it going to work in a Random Booster without serious protection.
Rip https://imgur.com/a/Pl8DGN6
Anime level destruction here. I don't know if it was the way it was on the launcher or if it was just very worn out. It seemed mostly fine before the break...
Anime level destruction here. I don't know if it was the way it was on the launcher or if it was just very worn out. It seemed mostly fine before the break...
(Dec. 16, 2018 10:05 PM)Dragunix Wrote: Rip https://imgur.com/a/Pl8DGN6
Anime level destruction here. I don't know if it was the way it was on the launcher or if it was just very worn out. It seemed mostly fine before the break...
I know this happened at least once just as it was released in exactly the same way. How worn down was it?
(Dec. 16, 2018 10:24 PM)MagikHorse Wrote:(Dec. 16, 2018 10:05 PM)Dragunix Wrote: Rip https://imgur.com/a/Pl8DGN6
Anime level destruction here. I don't know if it was the way it was on the launcher or if it was just very worn out. It seemed mostly fine before the break...
I know this happened at least once just as it was released in exactly the same way. How worn down was it?
Not much as far as I could tell. There wasn't a lot of visible stress on it before either.
I've had it for a few months now, so it's not the worst break. I'd say the worst break is a single tooth that gets grinded down while the others remain about the same.
(Dec. 16, 2018 11:10 PM)Dragunix Wrote:(Dec. 16, 2018 10:24 PM)MagikHorse Wrote: I know this happened at least once just as it was released in exactly the same way. How worn down was it?
Not much as far as I could tell. There wasn't a lot of visible stress on it before either.
I've had it for a few months now, so it's not the worst break. I'd say the worst break is a single tooth that gets grinded down while the others remain about the same.
That had to happen to aH huh...Lel my wV now has 3 broken teeth.
That aH pic is a good break
just wondering if this was tournament legal or not.
https://docs.google.com/document/d/1RPsO...WKlZA/edit
took the Hasbro free-spinning portion of revolve and put it on my tt one because i lost the tt piece.
https://docs.google.com/document/d/1RPsO...WKlZA/edit
took the Hasbro free-spinning portion of revolve and put it on my tt one because i lost the tt piece.
My gray hasbro L/R string launcher died in right spin. The gear skips and it is unusable for right. Left has lost a little bit of power and is inconsistent.
My best launcher is now the SwitchStrike launcher.
My best launcher is now the SwitchStrike launcher.
I opened up the launcher and the gear that is for right spin has a broken tooth and the base for it has broken. Left spin worked.....
Until I tried to reverse the direction the string goes and killed it completely.
Until I tried to reverse the direction the string goes and killed it completely.
Guys, while i was testing this combo against Smash Attack types with Attack Rings like trygle-griffolyon-dark dragoon paired with a Wide Defense weight disk, a normal right spin gear and Seaborg's base in Attack mode my draciel s's Blade Base lost a little wing who kept the metal balls in place. It was as heavy as possible, with 4 metal balls, a heavy metal core and a 10 heavy. Attack Ring from draciel f. I bought it used, do you think this could be a major factor in this break? It didn't show particular stress marks...
![[Image: 2qs1i88.jpg]](https://i68.tinypic.com/2qs1i88.jpg)
![[Image: xckr6f.jpg]](https://i67.tinypic.com/xckr6f.jpg)
![[Image: 30j5s2f.jpg]](https://i67.tinypic.com/30j5s2f.jpg)
(Dec. 30, 2018 4:49 PM)Adarsh Abhinav Wrote: [Image: 9hmgzk.jpg]
Dead Pheonix IRL
It's Firefire'S not mine. Happened against czV
I don't think Phoenix will revive from that one, eh?
I am so sad my favorite driver loop broke. One of the wheels broke off.
One of my Victory Valkyrie's wings snapped off in a fight with Xeno Xcalibur's sword part chipping off quite badly too. The wing I was able to repair with Super Glue (but will no longer be eligible for use), but the sword won't be recovering from that damage anytime soon.
My Revolve Driver from Rising Ragnaruk had the free spinning part flying into a floor black hole, never to be seen again after getting struck by a weak launched Lost Longinus post-bursting)
My Revolve Driver from Rising Ragnaruk had the free spinning part flying into a floor black hole, never to be seen again after getting struck by a weak launched Lost Longinus post-bursting)
Epic battle with Dark Deathsizer , Lets just say im sad.
They were my only beyblades at the time. I launched one. The WD driver broke into many pieces
I had a Doomscizor D2 layer. (Yes, Hasbro.) And when it was battling an Xcalius X3 combo on some driver like Xtreme, it was hit to hard that it burst, the layer flew out of the stadium like a bullet, and kinda just shattered when it it a wall.
Compared to what I've heard about other people's breaks mine isn't too major, but I hand-spun my fafnir and launched my achilles as usual, but suddenly I heard a big hit and noticed the metal on one of the sides of Achilles's layer came off, but didn't think much of it. I kept battling with Achilles and I heard another loud hit, but this time I noticed that a red piece of plastic flew out of the corner of my eye, watching it fly all the way over to my other half of the room to watch it hit the wall. My achilles had its entire right side broken off and without the metal.
(Jan. 04, 2019 5:42 PM)MWF Wrote:(Jan. 04, 2019 5:31 PM)DrainBladerAMVS Wrote: You can't believe everything you read on the internet and someone could lie so they look cool or too get attention there are lots of reasons someone might lie
the only person grabbing for attention is you. Please leave them alone so we can resume back to the topic of this thread.
Let me start, the first revolve I got I kept messing with the dish until it wore down the little nubs that hold it onto the driver making it fall off.
At least you can make a mod with that driver
DrainBladerAMVS
I checked your profile and there's absolutely no way that you are 20 years old.
Who the hell cares if he broke his Spriggan or not ? The whole point of this thread is to whine about broken parts. If his Spriggan didn't break then good for him.
I checked your profile and there's absolutely no way that you are 20 years old.
Who the hell cares if he broke his Spriggan or not ? The whole point of this thread is to whine about broken parts. If his Spriggan didn't break then good for him.
![[Image: h6sIxPy.png]](https://i.imgur.com/h6sIxPy.png)
Well Hello,
I just had a battle with RPhoenix10T.Fr. which is a really nice combo from point of view and was battling against CRagnaroc ( stock combo) and suddenly this happened...
https://photos.google.com/photo/AF1QipPe...c-2uFaPJBW
I just had a battle with RPhoenix10T.Fr. which is a really nice combo from point of view and was battling against CRagnaroc ( stock combo) and suddenly this happened...
https://photos.google.com/photo/AF1QipPe...c-2uFaPJBW