first smash joker now beyblade joker

From trademark Kill Joker

From trademark Kill Joker

Source?

I didn't see that coming. (don't kill me, p5 fans xD) In all seriousness, Kill Joker doesn't seem reasonable out of context. The Layer Base shows why it's called "Kill" through its performance, but it doesn't fit in with the Joker theme imo, unless it's a reference towards evil clowns. Maybe something along the lines of "Deck Joker" or "Trade Joker" could've been more appropriate and original, considering Killer Deathscyther is already a thing. Hey, at least Ace Joker is going to be a thing now xD

I think the GT chip of this bey has fairly strong teeth (I'm telling that because in the picture shown by angry face, we see the teeth barely moved). It could survive the the massive (?) recoil of the layer. Of course, it was against a defense bey, so, maybe it is the picture is insufficient to decide.

---

2 Versus 2 format should be a thing. Change my mind.

I think the GT chip of this bey has fairly strong teeth (I'm telling that because in the picture shown by angry face, we see the teeth barely moved). It could survive the the massive (?) recoil of the layer. Of course, it was against a defense bey, so, maybe it is the picture is insufficient to decide.

It's also against stock Bushin Ashura, the weakest stock of the first three releases. The teeth barely moving is not surprising.

---

LET IT RIP!!

wbba profile

My two beys Earth Eagle, Dark Libra, forever lost,

you'll always be the one that started my hobby

and the Beyblade Geeks rekindled it.

[Image: pdXOXLR.jpg]

Regardless if this Joker was good or not these new beys would've won regardless, Takara Tomy and CoroCoro always makes sure the battles are in the new beyblades favour, except maybe Driger S.

---

My Cho-Z Reaper Deathscyther .12.Cr concept render, click below to see!

Spoiler (Click to View)

No I don't plan on doing more yet.

I should probably go back to making fan custom Zero G beyblade concepts again

In the opening only bladers that are shown for this first arc are Fumiya and Delta... so I guess that is going to be deltas beyblade... but Delta and Joker does not match because of a naming scheme... I think that this is deltas beyblade to be honest... It is all so weird... I kinda want this to be Deltas beyblade... Because delta is so cool... And joker sounds too cool to belong to that crappy designed character... Delta has that bed guy vibe... kinda like shu but I don't like shu and spriggan so I hope Delta will get some good development and spotlight... And awsome beyblade

It's also against stock Bushin Ashura, the weakest stock of the first three releases. The teeth barely moving is not surprising.

I know that. But, if the red wings are rubber like we speculated, it is something to think about, because rubber heavily increases friction and and causes higher chance of bursting in same spin battles. Yet, this chip didn't even click once.

---

2 Versus 2 format should be a thing. Change my mind.

It's also against stock Bushin Ashura, the weakest stock of the first three releases. The teeth barely moving is not surprising.

I know that. But, if the red wings are rubber like we speculated, it is something to think about, because rubber heavily increases friction and and causes higher chance of bursting in same spin battles. Yet, this chip didn't even click once.

Yes but Ashura has semi super small teeth which mean joker could still only have medium teeth.

---

Not bad eh?

Yes but Ashura has semi super small teeth which mean joker could still only have medium teeth.

Yes, but ashura has 7 of those small teeth though.........

---

2 Versus 2 format should be a thing. Change my mind.

Yes but Ashura has semi super small teeth which mean joker could still only have medium teeth.

Yes, but ashura has 7 of those small teeth though.........

seven short teeth that would easily skip when hit with a strong attack.

---

Highly Observant Hasbro Blader.

---

Yes but Ashura has semi super small teeth which mean joker could still only have medium teeth.

Yes, but ashura has 7 of those small teeth though.........

That does not change the fact that recoil would make them all move easily and since Ashura moves with ease the recoil is not powerful enough to make Joker click.

---

Not bad eh?

Am I the only one With Batman - Joker vibes here?

---

Am I the only one With Batman - Joker vibes here?

nope that was my first thought  . alot of people went with p5 joker for reference.  but the first thing that crossed my mind was I'M BATMAN!! lol

Once when I was a kid i draw clown themed beyblade... It was was caled hell clown because it was at the era of metal saga and it had hell fusion wheel...  So this is very exciting for me lol hahaha

---

Getting sR vibes here. The Pink part is the rubber.. We'll see..

Hopefully, with the orientation of the possibly rubber parts, it will be another left spin. Other than that, I do pray that they come up with feasible parts even if it may break the generation meta like Garuda, Spriggan, etc

---

Ore wa tsuyoi da

IG: @kinghadoukenbeypla
(I try to post daily for things like Beyblade and Gunpla)

Hopefully, with the orientation of the possibly rubber parts, it will be another left spin. Other than that, I do pray that they come up with feasible parts even if it may break the generation meta like Garuda, Spriggan, etc

Just by watching the video you can tell it's right-spin as it slows down. It's not the first time rubber's been on a right-spin bey, since Fusion Hades from Metal Fight did a fairly good job due to its hard rubber and was nearly viable. Although not typical, it's proven itself to be workable before and pretty close to actually being good.

As long as the rubber's hard enough it shouldn't have too much to worry about. Don't discount it just yet because of its gimmick.

---

Cincinnati-based Organizer, and owner of every single currently released TT Burst bey part in at least one color. Hard to think of anything I don't have from MFB either...

Hopefully, with the orientation of the possibly rubber parts, it will be another left spin. Other than that, I do pray that they come up with feasible parts even if it may break the generation meta like Garuda, Spriggan, etc

Just by watching the video you can tell it's right-spin as it slows down. It's not the first time rubber's been on a right-spin bey, since Fusion Hades from Metal Fight did a fairly good job due to its hard rubber and was nearly viable. Although not typical, it's proven itself to be workable before and pretty close to actually being good.

As long as the rubber's hard enough it shouldn't have too much to worry about. Don't discount it just yet because of its gimmick.

Yeah, the rubber could do one of three things: work to absorb impacts, increase Burst Attack to compliment the rough perimeter, or be the one thing that turns Kill Joker into an absolute joke.

Regardless if this Joker was good or not these new beys would've won regardless, Takara Tomy and CoroCoro always makes sure the battles are in the new beyblades favour, except maybe Driger S.

This. A single battle uploaded by a company whose main goal is to sell you their product means nothing.

---

Check out my YouTube channel!

does this bey spin to the left or to the right? I watched the video but I cannot remember.

---

https://www.youtube.com/channel/UCzL8dVb...subscriber

does this bey spin to the left or to the right? I watched the video but I cannot remember.

Kill Joker is a Right-Spin Bey.

Spoiler (Click to View)

So I've been thinking a bit about what Disc and Driver Kill Joker will come with, given we already know what its Gatinko Chip, Weight, and Base are.

The Driver is a lot easier to guess since we can see in the video that KJ's movement pattern is fairly consistent to a defensive tip, with it being mobile but not as mobile as an attack tip, but the only Balance-type Drivers with a tip that would provide that movement would be Zeta/Zeta' in Defense mode or Liner. There is always the chance it comes with a new Driver, but to be honest, Liner or Liner' would make a lot of sense to be this bey's Driver because not only is the only other stock bey made with stationary attack in mind (Inferno Ifrit) also the only other stock bey to come with Liner, but it would also be kinda fitting for a beyblade with "Joke" in its name to come with the biggest joke of a Driver in Burst, lol.

As for Discs, its a lot harder to speculate, because it mostly depends on what (for lack of a better term) ruleset the GT Boosters will follow. In previous series, most boosters would only come with two new parts (a Layer and either a new Disc, Driver, or Frame), but since GT splits the Layer into multiple parts, it calls into question whether the new Gatinko Chip and Base in these releases counts as one new part or two in terms of the "two new parts per booster" ruleset. They might end up letting new Booster releases come with a new Gatinko Chip and Base to keep all of them unique, but at the same time, they could just do what they did during MFB and reuse Bases on newer beys. Its up in the air, and personally I think they'd lean for the latter since theyve done that in the past, but we really won't know until it comes out.

If they do use an older Disc for this release though, the only real option for a fitting Disc is Zenith, since its in the same weight range as the GT Discs and even has rubber on it like the Base probably does. But if that is the case... that would mean three rereleases of Zenith will have been put out in the space of 2 months. Not really a dealbreaker, but it does sound excessive on paper, haha.

And again, this is all just speculation. I'm pretty certain I'm putting more thought into this than TT did, lol... but if one of the next leaks reveals the full combo is Kill Joker.Z.L' Zan, I will be very amused, haha.

Spoiler (Click to View)

So I've been thinking a bit about what Disc and Driver Kill Joker will come with, given we already know what its Gatinko Chip, Weight, and Base are.

The Driver is a lot easier to guess since we can see in the video that KJ's movement pattern is fairly consistent to a defensive tip, with it being mobile but not as mobile as an attack tip, but the only Balance-type Drivers with a tip that would provide that movement would be Zeta/Zeta' in Defense mode or Liner. There is always the chance it comes with a new Driver, but to be honest, Liner or Liner' would make a lot of sense to be this bey's Driver because not only is the only other stock bey made with stationary attack in mind (Inferno Ifrit) also the only other stock bey to come with Liner, but it would also be kinda fitting for a beyblade with "Joke" in its name to come with the biggest joke of a Driver in Burst, lol.

As for Discs, its a lot harder to speculate, because it mostly depends on what (for lack of a better term) ruleset the GT Boosters will follow. In previous series, most boosters would only come with two new parts (a Layer and either a new Disc, Driver, or Frame), but since GT splits the Layer into multiple parts, it calls into question whether the new Gatinko Chip and Base in these releases counts as one new part or two in terms of the "two new parts per booster" ruleset. They might end up letting new Booster releases come with a new Gatinko Chip and Base to keep all of them unique, but at the same time, they could just do what they did during MFB and reuse Bases on newer beys. Its up in the air, and personally I think they'd lean for the latter since theyve done that in the past, but we really won't know until it comes out.

If they do use an older Disc for this release though, the only real option for a fitting Disc is Zenith, since its in the same weight range as the GT Discs and even has rubber on it like the Base probably does. But if that is the case... that would mean three rereleases of Zenith will have been put out in the space of 2 months. Not really a dealbreaker, but it does sound excessive on paper, haha.

And again, this is all just speculation. I'm pretty certain I'm putting more thought into this than TT did, lol... but if one of the next leaks reveals the full combo is Kill Joker.Z.L' Zan, I will be very amused, haha.

If it has that unicycle driver, I will be so surprised!

---

My Cho-Z Reaper Deathscyther .12.Cr concept render, click below to see!

Spoiler (Click to View)

No I don't plan on doing more yet.

I should probably go back to making fan custom Zero G beyblade concepts again