I recently removed the rubber from Variable (which is a story for another time), and did so to mod the tip. This is the end result;

[Image: 2w3748g.jpg]

I stuck the eraser from a mechanical pencil into the small hole and erased it a bit to make it sort of round. Now, it is a rubber flat and it has some good KO defense.

---

૮(•ᴥ•)ა

I recently removed the rubber from Variable (which is a story for another time), and did so to mod the tip. This is the end result;

[Image: 2w3748g.jpg]

I stuck the eraser from a mechanical pencil into the small hole and erased it a bit to make it sort of round. Now, it is a rubber flat and it has some good KO defense.

heya rsf, how ya been

(also that's cool)

Did you have to glue it in? Or does it just stay there on its own?

---

Did you have to glue it in? Or does it just stay there on its own?

No glue! I went through a few different erasers and this one I was able to force fit into the other, small hole. I will post images of how the insides looks later.

---

૮(•ᴥ•)ა

just get something heavy af and you will have a mega combo

I really wish takara came out with something like this

---

check out my art page and i also do commisions and maybe requests

t-spencil.deviantart.com

5 years ago I made the strongest beyblade:
L-Drago Meteo
Now I will show you L-Drago Meteo UW145CF (I think UW145 is better for left spin)

I really wish takara came out with something like this

this needs to be mass produced, just for the novelty alone.
i hope someone can 3D print these, and mass produce them to sell.

---

please, someone sell me gabriel g :'(
i need a hasbro white gabriel g, i'll even buy a broken one.
image below.
buying thread

this needs to be mass produced, just for the novelty alone.
i hope someone can 3D print these, and mass produce them to sell.

I'm actually totally up for buying some fake burst beys in order to make some of those burst bit chips!
here's another vid, this guys whole channel is practically about beyblade modin

---

check out my art page and i also do commisions and maybe requests

t-spencil.deviantart.com

I've just filed down the fusion driver and smacked it on a couple different layers and discs

---

Wow much cake 
Such sponge[Video: https://m.youtube.com/watch?v=yqyixwqiCag]
Yellow color
So taste
Mmm good

Aoi Valt In 2011 I made a Meteo Guardian. It was also very good.

Anyone know one for wvyron w2?

this needs to be mass produced, just for the novelty alone.
i hope someone can 3D print these, and mass produce them to sell.

I'm actually totally up for buying some fake burst beys in order to make some of those burst bit chips!
here's another vid, this guys whole channel is practically about beyblade modin

So fake beyblades are useful??? 

---

Strength and growth come only through continuous effort and struggle. 

-Napoleon Hill

I created a mellow but effective mod using the hollowed out hasbro phantom, BD145, and E230. I put the disk from e230 on the base for bd145 and Found that if it is put on the hollow phantom it will have both a "stamina mode" when the disk is in what is "upper mode" on E230 and it has no gap. it's "defense mode" is when the disk is in "lower mode" and it gives a defensive ring under the bey to defend against low beyblades. It is nothing like any other mod here but it is cool. I call it e145. I also made bd230 from this.

---

Highly Observant Hasbro Blader.

---

The performance tip I added in my illegal mod, I am not sure what is that called...
I will post the stuff soon, cuz I am busy.

---

Strength and growth come only through continuous effort and struggle. 

-Napoleon Hill

If you have illegal mods post them here!
For people who dont read titles this is all IILEGAL！
First the mini libra
Next eternal gear
Finally metal defence
Will add more later
More..
Blade killer
Blade killer no 2
Super long metal face(used for placeing mutiple plastic weight discs)
Rubber ball
Modded Hms launcher(streneth x2)
Bearing bottom(when spun with hand lasts for 41 secs)
LONG winder
Bull ver 2.0
Motar beyblade(the top spins independently inside)
Metal defence ver2.0 (weights the same as a light beyblade)
Static(lightning's litte brother)

Eternal Gear is similar to Jaggy driver, but whoah!!!

---

Strength and growth come only through continuous effort and struggle. 

-Napoleon Hill

So...this...

https://imgur.com/a/kKKRq

I forced a Korean "Top Plate" metal piece onto a 7M disc and Orbit and it fit pretty tightly. Now you can put any layer on it and it is pretty sturdy.

---

Trivia: I used the Golem disc. I used to be able to use the Falcon disc with 4G, but it wouldn't stay on after a while...

---

And you can remove the layer, and it will still act like the Mugen driver: supporting just about any layer (LEFT AND RIGHT SPIN AT THAT, HAH!)

---

Hi! I've been on and off this site for a while now, but if you're new or just seeing this I hope you enjoy your stay on the WBO.

I am not sure if this has been posted before but...

Needed: Diablo Nemesis, Death Quetzalcoatl, Kreis Cygnus.

First place the Kreis frame in the Attack mode placement
Second place the Kreis core on top of the frame it should now look like Diablo Nemesis Ultimate Balance mode.
Third place the Quetzalcoatl frame on top of the Kreis core.
Fourth add X: D to hold it all together.
Finally add the Clear wheel and Facebolt. I used Cygnus but others may work too.

---

Click here and all will be revealed

Spoiler (Click to View)

all

This may not be anime accurate...
Why was Shu happy?

Spoiler (Click to View)

Because Wakiya 4 glaive (forgave) him.

Dang...

---

Hi! I've been on and off this site for a while now, but if you're new or just seeing this I hope you enjoy your stay on the WBO.

Painting burst parts with Gundam markers. I am not sure if this is suppose to be legal, since Gundam marker paint comes off very easily even dried feels thin too.

Can someone add some weight (putty or metal) in the dragoon S layer (burst) and see how it performs.

---

Fav cho-Z combos
[\spoiler]
cR with A level chip 7 Revolve
rP with A level chip 10 Cross Atomic
zA with A level chip 0 Bump Destroy
hS with A level chip 7 Glaive Bearing
vL with A level chip 0 Reach Jolt
bL with A level chip 0 Glaive Variable(worn)

I'm working on an L-Drago remake. It is currently a Drain Fafnir Triple Xtreme with LRF taped on.

---

My Beyblade Customs:
Attack
Xcalibur Heavy Accel
Defense
Wyvron Armed Massive
Zombie
Drain Fafnir Heavy Weight
Balance
Xcalibur Knuckle Massive

Do not post drafts without moderator permission.

is it illegal to combine diablo nemesis and death quetzalcoatl?

---

(\____/)
 | 0  v |
||   v   |\    
||-------|/    
/______\    
   |     |
   |     |

Im a boy 

check out my website :)
https://www.trepup.com/danmations

is it illegal to combine diablo nemesis and death quetzalcoatl?

That depends on what you mean.

---

My Cho-Z Reaper Deathscyther .12.Cr concept render, click below to see!

Spoiler (Click to View)

No I don't plan on doing more yet.

I should probably go back to making fan custom Zero G beyblade concepts again

I'm actually totally up for buying some fake burst beys in order to make some of those burst bit chips!
here's another vid, this guys whole channel is practically about beyblade modin

[/quote]

it could be possible for one to make 3D printable part with the clips for the AR being made of nijaflex or another rubberized substance so its a bit easier to take the part out, it isnt easy taking some chips from select attack rings

---

if your respectful to Me, then Il do the same and be respectful to you.

there is no such thing as perfection, for with out flaws we can not improve.