World Beyblade Organization by Fighting Spirits Inc. Off-Topic Forums Your Creations

[3D Printing]  3D Print Files for Custom Beyblade Burst

Apr. 23, 2020  9:10 PM
 
This is the best thread. I agree with that petition dude earlier.
Apr. 23, 2020  9:40 PM
 
I wish I could find CrazyAries' Salmander GT chip, though. I thought I did? But then I probably imagined it.
Apr. 28, 2020  12:25 AM
 
Well, I did it, I made my own Superking bey. It is called Magnetic Angel Wheel Planet 1P

https://www.tinkercad.com/things/bHsRbcjbD7v
Apr. 28, 2020  1:40 AM
 
I haven't test-printed this yet, but the design is pretty much done. This is Twilight Hades. The "stock combo" can be whatever you want it to be, but something like Twilight Hades 00 Turn/Wall Zephyr'/Trans'/Zeta' 1S would probably be the most logical. https://www.tinkercad.com/embed/aTektNn6MFB
May. 01, 2020  4:51 AM
 
I dont know if this is the place to put this but I designed some beys, and am soon going to start fusion 360. I have okay designs, but if you guys like them, you can tell me? maybe? Im really awkward lol (PS I designed nearly everything from scratch, including the curse satan layer)https://www.tinkercad.com/users/cugEomSp...ladedesign
May. 01, 2020  5:04 AM
 
(May. 01, 2020  4:51 AM)Logic123ABC Wrote: I dont know if this is the place to put this but I designed some beys, and am soon going to start fusion 360.  I have okay designs, but if you guys like them, you can tell me? maybe?  Im really awkward lol  (PS I designed nearly everything from scratch, including the curse satan layer)https://www.tinkercad.com/users/cugEomSp...ladedesign

Those are amazing!
May. 01, 2020  11:38 PM
 
Here's Ronin Gekkouga, an idea that I've had for a while that is basically a Greninja Sparking Bey. https://www.tinkercad.com/things/iYMl2DsOs8w
May. 02, 2020  12:47 AM
 
(May. 01, 2020  11:38 PM)CitrusNinja3 Wrote: Here's Ronin Gekkouga, an idea that I've had for a while that is basically a Greninja Sparking Bey. https://www.tinkercad.com/things/iYMl2DsOs8w

I love the design (so much that I am making an upgraded version called Bond Gekkouga, don't worry though! You will recieve credit).
May. 02, 2020  9:42 AM
 
I made a (Regalia/BigBang) Genesis Sparking Chip. The template I used was made by Level Zero and Weeaboo. If you want to support my future 3D modeling projects, you can donate whatever you think my work is worth or simply print it and share it with your friends. It really takes a lot of time to model these designs so any support and appreciation is greatly appreciated. I do not intend to make profit. But as I am buisy with other stuff and personal things are also going on, I would really welcome any support. Even if it's just taking a look at my YouTube channel called Zera and leaving a nice comment if you want. It would really make my day. But please do also not only support me, but also support Level Zero and Weeaboo, as this would have not been possible without them.

Here is the file:
https://www.thingiverse.com/thing:4321398

I hope you all have a wonderful day. Keep on blading and god bless! Smile

~ Zera
May. 04, 2020  5:08 AM
 
I made an Ifrit Ring with a template copied from CitrusNinja3 who copied it from Fafnir_F3 who got it from Level 0 and Weeaboo. The slightly lighter orange is a disconnected piece from the whole ring that you screw on, it is supposed to be rubber to mimicking the Brave Ring gimmick.
[Image: e-VOZFsTL1wp5lAVMKvfalf7UYwUtxS-18fmGBUX...cBATDTJGm0]
I’m working on Stickers.
For the triangles
May. 04, 2020  5:22 AM
 
(May. 04, 2020  5:08 AM)Dacatman Wrote: I made an Ifrit Ring with a template copied from CitrusNinja3 who copied it from Fafnir_F3 who got it from Level 0 and Weeaboo. The slightly lighter orange is a disconnected piece from the whole ring that you screw on, it is supposed to be rubber to mimicking the Brave Ring gimmick.
I’m working on Stickers.
For the triangles

It looks pretty good. Do you have a Chip designed yet? Also, thanks for the clarification on Tinkercad. It's getting kind of hard to know the original source of a template nowadays xD.
May. 04, 2020  5:41 AM
 
Speaking of Chips, I am starting a design contest and whoever I choose has the best designed Chip gets the file before I make it public.
Like a month or two before
May. 04, 2020  2:37 PM
 
i got the Wolborg part from thingieverse, and then the sparking design from someone on TinkerCAD

https://drive.google.com/file/d/10DxDSaN...sp=sharing
May. 04, 2020  2:43 PM
 
Thief Minoboros
https://www.tinkercad.com/things/1nvxvwxPcIG-thief
https://www.tinkercad.com/things/0nLZLT0...rking-chip
May. 04, 2020  2:46 PM
 
(May. 04, 2020  2:43 PM)Logic123ABC Wrote: Thief Minoboros
https://www.tinkercad.com/things/1nvxvwxPcIG-thief
https://www.tinkercad.com/things/0nLZLT0...rking-chip

you beat me to making the minoboros chip!!! Unhappy
yo Dacatman (or someone who will be willing to do it), can you make a design for the Wolbotg Chip
May. 05, 2020  4:45 AM
 
Any drawings for the Ifrit Chip yet, I’m have a writer’s block type thing going on.
May. 05, 2020  4:46 PM
 
(May. 05, 2020  4:45 AM)Dacatman Wrote: Any drawings for the Ifrit Chip yet, I’m have a writer’s block type thing going on.

im on it, its looking ok for me. ill show a picture in a little bit
(May. 05, 2020  4:45 AM)Dacatman Wrote: Any drawings for the Ifrit Chip yet, I’m have a writer’s block type thing going on.

here's what i made its a prototype for the the base, https://drive.google.com/file/d/10JyDOaM...sp=sharing
May. 06, 2020  3:18 AM
 
[Image: l8DHU1n.jpg]

Another post about me gushing over CrazyAries. His Salamander GT chip is perfect. Its design is so perfect it works with some of Salamander's stickers.

This guy is a genius. If you haven't printed Brilliant Baldur, Nebula Zeus or any of his other insanely amazing but time-consuming to put together stuff, I HIGHLY recommend trying it. It's better than TT quality stuff.

I used his Influx Frame for some wicked, too (which I'll post later).
May. 06, 2020  3:34 AM
 
(May. 06, 2020  3:18 AM)KinkoUsagi Wrote: Another post about my gushing over CrazyAries. His Salamander GT chip is perfect. Its design is so perfect it works with some of Salamander's stickers.

This guy is a genius. If you haven't printed Brilliant Baldur, Nebula Zeus or any of his other insanely amazing but time-consuming to put together stuff, I HIGHLY recommend trying it. It's better than TT quality stuff.

I used his Influx Frame for some wicked, too (which I'll post later).

Looks Amazing.
May. 06, 2020  11:38 PM
 
Man it feels good to be back!
I have a bey that I created that I haven't tested yet but it should do really good.
May. 06, 2020  11:41 PM
 
(May. 06, 2020  11:38 PM)Sunset Blader Wrote: Man it feels good to be back!
I have a bey that I created that I haven't tested yet but it should do really good.

Sounds cool, What makes it good?
May. 06, 2020  11:44 PM
 
It has the achilles blades but it doesn't take as much damage
https://www.tinkercad.com/things/faTE4wO...llar-allis
Tbh it's a cho-z bey do I don't know how it would do agains't others
Im currently working on the gt version
I call it saga echo
The Version that I have already is a Cho-X bey
May. 07, 2020  12:57 AM
 
Cool Designs.
May. 07, 2020  5:42 PM
 
Yea that's some good stuff
May. 07, 2020  6:06 PM
 
(May. 06, 2020  11:44 PM)Sunset Blader Wrote: It has the achilles blades but it doesn't take as much damage
https://www.tinkercad.com/things/faTE4wO...llar-allis
Tbh it's a cho-z bey do I don't know how it would do agains't others
Im currently working on the gt version
I call it saga echo
The Version that I have already is a Cho-X bey

the only problem i see with the design is that the template you are using has a history of breaking (from my experience) there are some better templates out there to use.
Prev
Page 25
Next