So I am working on a 3D Printed request service. I accept 10 requests at a time. so far ALL SPOTS ARE FULL. Here is the link to the request form: https://goo.gl/forms/LDWv0B2jH9sEEJCT2 [Closed until some of the orders are shipped]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

IMPORTANT UPDATE: Regarding gimmicks, I wont be bale to do burst stoppers, levelup chips, or Requiem/Legend Spriggan's dual spin feature. 

IMPORTANT UPDATE: Regarding just making the file, I am able to do so and the price of said file would be half of what the original price would've been if I were to print it

I can't make layers that allow levelup chips because I have not been able to find Cho Z base layer files that are compatible with it. That is not to say I can't do any levelup chips, it just means you would get the levelup chip by itself without a layer that is compatible with it.

I can't do the burst stoppers because there are no files for it and because I don't know how to get it to function with the base models I use for TinkerCAD.

I can't do Spriggan's dual spin for a similar reason that I can't do the levelup chips. That is not to say I can't do any dual spin, it just means it would work like Left Artemis and Right Apollos does. I also plan on doing frames and disks compatible with frames but I am still working that out.

TL DR: I can't do these gimmicks because of the lack of files on the internet needed.

IMPORTANT UPDATE (1/3): Regarding Pricing, these are subject to change. Due to the amount of resources I have right now, only the top 3 will be able to be for free as I only have enough material to spare for those to be for free. If you are wondering why that is, I thought that I would be getting funding soon but there is a possibility that I will have nothing as prior to now, I was guaranteed some amount of money. 
                                     
[b]IMPORTANT UPDATE (2/3): [/b]If you are wondering why I am talking about funding, I am apart of a program run by a non-profit organization that helps teens create, start, and manage small businesses. This or next week is what the program calls a business expo -This is where a group of volunteers with a pool of money pick their top 5 favorite businesses to fund- due to how this works, there may be some people that end up with nothing as the volunteers are adults that know nothing about this community.

IMPORTANT UPDATE (3/3): Those that will have to pay will only have to pay 10% of the total cost. For example, if the total cost was $5.00 USD, they would pay only $0.50 USD
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
IMPORTANT UPDATE: SHIPPING WILL BEGIN AFTER APRIL VACATION (AFTER NEXT WEEK).
abidjkhan7 (waiting for metal)
IceCreeper909
crystal azule
kingbladersoul
omega263 (need to print)
Ntruder19
tpoez28
EMAIL VIA FORM (need to print)
EMAIL VIA FORM (need to print)
 
$5 USD (+$1.00 USD for Cho-Z, +0.50 USD per Gimmick, +$10.00 USD for all metal) for a complete bey. 
$1.50 USD (+$1.00 USD for Cho-Z, +0.50 USD per Gimmick +$5.00 USD for all metal) for a Layer
$2.50 USD for a Disk
$1.00  USD for a Driver (+$5.00 USD for all metal)

1/2 of Total Cost for just Files

Expect the process to be lengthy because I first need to develop concept sketches then try to integrate them into my 3D modeling software.

Here are some images for one of the designs:
tpoez28 -incomplete
https://drive.google.com/file/d/1dlrRSm4...sp=sharing (CHO-Z METAL)
https://drive.google.com/file/d/1ASqlK_B...sp=sharing (DRIVER)
https://drive.google.com/file/d/1XaebhOj...sp=sharing (DISK)
https://drive.google.com/file/d/1BUug8sZ...sp=sharing (LAYER)

Molds (4 Bladed Discs -Even Distribution)
https://drive.google.com/open?id=15g_PMO...G98VRzbM5W

abidjkhan7 -complete
https://drive.google.com/file/d/1Z5YAjK6...sp=sharing (Layer -Gimmick, Top View)
https://drive.google.com/file/d/1Mv0hPI3...sp=sharing  (Layer -Gimmick, Bottom View)
https://drive.google.com/file/d/1NIoxIkg...sp=sharing (Layer -Gimmick, Side View)
https://drive.google.com/file/d/1m07lTKK...sp=sharing (Layer -Base)
https://drive.google.com/open?id=1hE04Ic...Io0IVL5Vz1 (Cho Z Metal)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
For Those That Want To Know The Materials I Use:

Plastic Components:
ABS

Rubber Components:
Soft PLA + FLEX Seal

Metal Components:
Proto Pasta Stainless Steel PLA

Springs:
Custom Ordered on Amazon

Bearings:
Figit Spinner Bearings on Amazon

NOTE: Everything on this list can be found and bought on Amazon.

So are there any spots open

Hey burst3dprinter, you do t seem to be replying to my PMs so I’m asking here, can I see your progress on my bey or have you not started yet?

---

Also I am willing to print it myself so you would just need to send me the file when I’m done

---

Spoiler (Click to View)

Spoiler (Click to View)

Spoiler (Click to View)

Spoiler (Click to View)

Spoiler (Click to View)

Spoiler (Click to View)

hi

This is very nice. Unfortunately I can't afford them. It might be cheap to some people but not me. ??

are there any spots open right now?

Is it free for me to get one?

Currently, it is free to get a Beyblade, but in the spots to order a Beyblade are full, so we may have to wait a bit. However, Burst3DPrinter is saying that a few slots could open up soon. Sometime in 2019, when Burst3DPrinter gets a website, we will have to pay 6 USD for a Beyblade.

but it is 2019
and i have a error

Hey, Burst3DPrinter I wanted to know if you are still doing custom beys because I might want one and I am willing to pay for it. Not trying to rush you or anything, because I know how hard and long this can take.

Hey! Are you still doing commissions also if you send in a google form how do we know you have seen it and how do you send in the money

If this is even still alive, do you think you will be able to make a metal saga bey?

Hi, does anyone here know how to start a thread?
I also design Beyblades and want to start my own thread about it.

---

Subscribe to my channel on Youtube, link is down below.

https://www.youtube.com/channel/UCU5pj9U...subscriber

Hi, does anyone here know how to start a thread?
I also design Beyblades and want to start my own thread about it.

Go here and click on “Post Thread”: https://worldbeyblade.org/Forum-Your-Creations

---

Hey there! My name is BuilderROB and I am an organizer who hosts tournaments in North Carolina.

Spoiler (Click to View)

Spoiler (Click to View)

I AM STILL ALIVE!!!!!!!!!!!!!!!!!!
I AM STILL ALIVE!!!!!!!!!!!!!!!!!!
I AM STILL ALIVE!!!!!!!!!!!!!!!!!!
I AM STILL ALIVE!!!!!!!!!!!!!!!!!!
I AM STILL ALIVE!!!!!!!!!!!!!!!!!!

I'm just very busy as I had completed finals for my previous courses last week and I just started a new semester. I am currently in a AP Course that requires a lot of time after school as the course is AP Computer Science. As I am in my Junior year of high school, I know that my course load is going to become more heavy. The program that I conduct this forum and the creation of the beyblades with will be starting back up again on February 3rd. I'll be honest, I am overwhelmed. One of these factors was that I want to get my creations for you guys out as fast as possible but I know that realistically it will take a while. The other factors revolve around my personal life and the death of a life long and beloved pet. They died of kidney failure. I am going to distance myself from this forum and service until February, where then I will review all of the requests I had excepted in the past and try to redesign/improve upon what I had done in the past. I want you all to know that I am trying my hardest to juggle my academic responsibilities, my wants of providing this service to you, and my emotions. I currently have some social media accounts that I will try to use actively in February. I have big plans, and I just need the time for my brain to cool down and process everything before I can get started.

Thanks for being understanding,
Burst3DPrinter (Liam)

My Youtube Account:
https://www.youtube.com/channel/UCxeyoWh...subscriber

My Twitter:
https://twitter.com/Burst3DPrinting

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

I would like to know if you can make Sparking Beyblades if you are no longer on a break. And I am sorry for your loss.

Do I have to fill something in to get one if so where is it and if not can someone help me

I AM STILL ALIVE!!!!!!!!!!!!!!!!!!
I AM STILL ALIVE!!!!!!!!!!!!!!!!!!
I AM STILL ALIVE!!!!!!!!!!!!!!!!!!
I AM STILL ALIVE!!!!!!!!!!!!!!!!!!
I AM STILL ALIVE!!!!!!!!!!!!!!!!!!

I'm just very busy as I had completed finals for my previous courses last week and I just started a new semester. I am currently in a AP Course that requires a lot of time after school as the course is AP Computer Science. As I am in my Junior year of high school, I know that my course load is going to become more heavy. The program that I conduct this forum and the creation of the beyblades with will be starting back up again  on February 3rd. I'll be honest, I am overwhelmed. One of these factors was that I want to get my creations for you guys out as fast as possible but I know that realistically it will take a while. The other factors revolve around my personal life and the death of a life long and beloved pet. They died of kidney failure. I am going to distance myself from this forum and service until February, where then I will review all of the requests I had excepted in the past and try to redesign/improve upon what I had done in the past. I want you all to know that I am trying my hardest to juggle my academic responsibilities, my wants of providing this service to you, and my emotions. I currently have some social media accounts that I will try to use actively in February. I have big plans, and I just need the time for my brain to cool down and process everything before I can get started.

Thanks for being understanding,
                Burst3DPrinter (Liam)

My Youtube Account:
https://www.youtube.com/channel/UCxeyoWh...subscriber

My Twitter:
https://twitter.com/Burst3DPrinting

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Can you do Dynamite Battle parts? As in like the Core, Blade, Armour and Disks?

---

“you have something called "determination." so as long as you hold on... so as long as you do what's in your heart... i believe you can do the right thing.” 

― Sans

   

JoJo Valt is best Valt

If you would like me to make you a pfp, make a request in this thread - https://worldbeyblade.org/Thread-Fan-Des...s-accepted

Is this still open for commissions

I didn't read everything due to losing brain cells

---

After you come back from your break I have a new system that might be printable

Um is this thread alive

Idk of you still do submissions or not (or even if this thread is still alive,) but if you do, I have a concept that I would really like to see printed and modelled.

Idk of you still do submissions or not (or even if this thread is still alive,) but if you do, I have a concept that I would really like to see printed and modelled.

thread's dead, my friend, it had been a year before you posted here

Idk of you still do submissions or not (or even if this thread is still alive,) but if you do, I have a concept that I would really like to see printed and modelled.

thread's dead, my friend, it had been a year before you posted here

I mean, not really a full year, it's been since last year that someone posted here, as well, this thread could still remain relevant so long as someone's willing to take up the torch to continue the modeling/printing service.

---

Beyblade Theory Combos:

Spoiler (Click to View)

Twin Nemesis 0Turn Xtend
Geist Fafnir 7Wall Merge'
Dead Phoenix 13Expand αnchor
Buster Xcalibur 1'αngle Operate
Ace Valkyrie 10Dagger Reboot' Sen
Bloody Longinus 11 Tower
Geist Fafnir Nine Quest

The list will be updated

Now, for some words of wisdom from Nam (me),

Spoiler (Click to View)

• There is no such thing as a bad part... except for Blow, Blow' and Sword
  
• You dare not even put Impact in the same category as those above. Impact is the worst of the worst, not even worth the title "Bad Part"
  
• Theory combos might be unexpectedly good if you just give them a try or two.
  
• Theory is love, theory is life.
  

Idk of you still do submissions or not (or even if this thread is still alive,) but if you do, I have a concept that I would really like to see printed and modelled.

thread's dead, my friend, it had been a year before you posted here

I just thought that it was worth checking

---

thread's dead, my friend, it had been a year before you posted here

I mean, not really a full year, it's been since last year that someone posted here, as well, this thread could still remain relevant so long as someone's willing to take up the torch to continue the modeling/printing service.

True

heya i have a model for a sparking bey i just need to add metal too it and your thing says you can add metal :3

---

#YeetLaunch
"Feel the burning divine light....FLAMING EXTREME DASH!- " - Sooshii (Me)