World Beyblade Organization by Fighting Spirits Inc. Off-Topic Forums Your Creations

3D Beyblade Tip Design Ideas

Nov. 13, 2017  4:55 AM
 
Recently I have started making 3D models of new Beyblade tips that I have created (I have do not have access to a 3D printer yet).
I have hit a creators block right now and I am looking for new ideas. I am hoping that some of the people on here can help me by giving ideas for new tips.

Since I am relatively new to this please no multiple part Beyblade tips (Bearings, free spinning, etc.)

All of the parts I make are for the Metal series.

Thanks in advance!

Here is the link to the objects I have posted to Thingiverse. Please note I have not printed all of them so some may not work.

https://www.thingiverse.com/BeybladePartMaker/designs
Nov. 13, 2017  6:43 AM
 
What about something similar to Defense/Press in Burst. I guess that would basically just be B/WB with the tabs to help regain balance.
Nov. 13, 2017  7:05 AM
 
what about a wide sharp
Nov. 13, 2017  10:58 AM
 
how about a metal ver of the yeilding driver?metal ver of bearing driver?and how about a merge driver with a metal sharp in center and plastic on the outside?
Nov. 13, 2017  1:33 PM
 
what about a POM b:d? i am interested how different it will work with the heavier metal saga beyblades. or a bearing ball/sharp/flat. basically any tip on a bearing. I wonder how CF will work on a bearing. you think you can try to make a spin track with a bearing in it? basically an improved free230.

lets call it Survivor230 (or if you can 145)


sorry if this is a lot.
(Nov. 13, 2017  10:58 AM)Rebel Blader Wrote: how about a metal ver of the yeilding driver?metal ver of bearing driver?and how about a merge driver with a metal sharp in center and plastic on the outside?

i think the metal saga equivalent of yielding is PD or do you mean a metal defence? and unless you mean a b:d with a metal contact surface the metal saga equivalent of bearing is b:d. it just has no POM
Nov. 13, 2017  3:10 PM
 
(Nov. 13, 2017  1:33 PM)MWF Wrote: what about a POM b:d? i am interested how different it will work with the heavier metal saga beyblades. or a bearing ball/sharp/flat.  basically any tip on a bearing. I wonder how CF will work on a bearing. you think you can try to make a spin track with a bearing in it? basically an improved free230.

lets call it Survivor230 (or if you can 145)


sorry if this is a lot.
(Nov. 13, 2017  10:58 AM)Rebel Blader Wrote: how about a metal ver of the yeilding driver?metal ver of bearing driver?and how about a merge driver with a metal sharp in center and plastic on the outside?

i think the metal saga equivalent of yielding is PD or do you mean a metal defence? and unless you mean a b:d with a metal contact surface the metal saga equivalent of bearing is b:d. it just has no POM

What i mean to say is a bd with a metal tip and a metal defense or eternal metal wide defense.and also it would intresting to see a metal hole flat and a metal cf which is supported by bearings
Nov. 13, 2017  4:57 PM
 
(Nov. 13, 2017  6:43 AM)Shaady Wrote: What about something similar to Defense/Press in Burst. I guess that would basically just be B/WB with the tabs to help regain balance.

Here you go:
@[ayggdrasilgy] is this what you mean?
I am unable to make multiple part tips (such as ones with bearings) right now but I could color metal parts grey.
Nov. 13, 2017  5:27 PM
 
(Nov. 13, 2017  4:57 PM)Flame-Byxis Wrote:
(Nov. 13, 2017  6:43 AM)Shaady Wrote: What about something similar to Defense/Press in Burst. I guess that would basically just be B/WB with the tabs to help regain balance.

Here you go:
@[ayggdrasilgy] is this what you mean?
I am unable to make multiple part tips (such as ones with bearings) right now but I could color metal parts grey.

Could u make the angle of the sharp part a bit low like that of the tip of revolve or burning kerbeus.also pls make metal hole flat
Nov. 13, 2017  8:46 PM
 
(Nov. 13, 2017  5:27 PM)Rebel Blader Wrote: Could u make the angle of the sharp part a bit low like that of the tip of revolve or burning kerbeus.also pls make metal hole flat

Here is the Metal Hole Flat and the modified Wide Sharp:
Nov. 13, 2017  10:26 PM
 
@[Flame-Byxis] Could you make a Right Rubber Giga Flat?
Also where did you make them?
Also please make a rubber giga ball.
Nov. 13, 2017  11:05 PM
 
(Nov. 13, 2017  10:26 PM)dt1000 Wrote: Flame-Byxis Could you make a Right Rubber Giga Flat?
Also where did you make them?
Also please make a rubber giga ball.

Here are R2GF and RGB (sorry for the low quality images):
I used 3D Builder.
Nov. 13, 2017  11:08 PM
 
(Nov. 13, 2017  11:05 PM)Flame-Byxis Wrote:
(Nov. 13, 2017  10:26 PM)dt1000 Wrote: Flame-Byxis Could you make a Right Rubber Giga Flat?
Also where did you make them?
Also please make a rubber giga ball.

Here are R2GF and RGB (sorry for the low quality images):
I used 3D Builder.

Best Defensive Tip ever right there.
Can you make a Dragoon MF tip?
Nov. 13, 2017  11:11 PM
 
(Nov. 13, 2017  11:08 PM)dt1000 Wrote: Best Defensive Tip ever right there.
Can you make a Dragoon MF tip?

I would need a picture of it. I don't know too much about plastics.
Nov. 13, 2017  11:13 PM
 
(Nov. 13, 2017  11:11 PM)Flame-Byxis Wrote:
(Nov. 13, 2017  11:08 PM)dt1000 Wrote: Best Defensive Tip ever right there.
Can you make a Dragoon MF tip?

I would need a picture of it. I don't know too much about plastics.

It's just a tall, heavy rubber flat tip. Between F and XF size.
Nov. 13, 2017  11:22 PM
 
(Nov. 13, 2017  11:13 PM)dt1000 Wrote: It's just a tall, heavy rubber flat tip. Between F and XF size.

So, like this?
Nov. 13, 2017  11:23 PM
 
(Nov. 13, 2017  11:22 PM)Flame-Byxis Wrote:
(Nov. 13, 2017  11:13 PM)dt1000 Wrote: It's just a tall, heavy rubber flat tip. Between F and XF size.

So, like this?

Yeah.
Nov. 13, 2017  11:42 PM
 
Here are some unrequested Beyblade tips I made:
From top left to bottom right I call them: Double Hole Flat, Jaggy, Hole Sharp, Cubed, Double Ball, Flat Quad Support, Giga Hole Flat, Semi Wide Defense, Ball Quad Support, Sharp Edge, Arc, and Edge.
Nov. 13, 2017  11:45 PM
 
(Nov. 13, 2017  11:42 PM)Flame-Byxis Wrote: Here are some unrequested Beyblade tips I made:
From top left to bottom right I call them: Double Hole Flat, Jaggy, Hole Sharp, Cubed, Double Ball, Flat Quad Support, Giga Hole Flat, Semi Wide Defense, Ball Quad Support, Sharp Edge, Arc, and Edge.

Ooh, cool.
Here's a Rubber Giga Flat I made, make your own ver please.
[Image: Rubber_Giga_Flat.png]
@[Flame-Byxis]
Nov. 14, 2017  12:36 AM
 
can you make a rubber wide defense? What about an xtreme defense or giga defense?
Nov. 14, 2017  1:44 AM
 
(Nov. 14, 2017  12:36 AM)MWF Wrote: can you make a rubber wide defense? What about an xtreme defense or giga defense?

Here is RWD and GD:

@[dt1000]
Here is my version:
Nov. 14, 2017  1:45 AM
 
(Nov. 14, 2017  1:44 AM)Flame-Byxis Wrote:
(Nov. 14, 2017  12:36 AM)MWF Wrote: can you make a rubber wide defense? What about an xtreme defense or giga defense?

Here is RWD and GD:

@[dt1000]
Here is my version:

RGF would be the best attack tip ever.
Nov. 14, 2017  1:46 AM
 
(Nov. 14, 2017  1:45 AM)dt1000 Wrote:
(Nov. 14, 2017  1:44 AM)Flame-Byxis Wrote: Here is RWD and GD:

@[dt1000]
Here is my version:

RGF would be the best attack tip ever.

that is if it can be controlled at all. so much surface area. so much grip.
Nov. 14, 2017  1:47 AM
 
(Nov. 14, 2017  1:46 AM)MWF Wrote:
(Nov. 14, 2017  1:45 AM)dt1000 Wrote: RGF would be the best attack tip ever.

that is if it can be controlled at all. so much surface area. so much grip.

Just to be pedantic: Such a tip would be like Variable: Completely uncontrollable with like no stamina. Xtreme is already the ideal width.
Nov. 14, 2017  1:48 AM
 
Not necessarily, as it may well be too difficult to control and maintain a flower pattern.
Nov. 14, 2017  1:49 AM
 
Right Rubber Flat Sharp
Well, if you could control it at least.
Page 1
Next