+- World Beyblade Organization by Fighting Spirits Inc. (https://worldbeyblade.org)
+-- Forum: Off-Topic Forums (https://worldbeyblade.org/Forum-Off-Topic-Forums)
+--- Forum: Your Creations (https://worldbeyblade.org/Forum-Your-Creations)
+--- Thread: 3D Beyblade Tip Design Ideas (/Thread-3D-Beyblade-Tip-Design-Ideas)
3D Beyblade Tip Design Ideas - Flame-Byxis - Nov. 13, 2017
Recently I have started making 3D models of new Beyblade tips that I have created (I have do not have access to a 3D printer yet).
I have hit a creators block right now and I am looking for new ideas. I am hoping that some of the people on here can help me by giving ideas for new tips.
Since I am relatively new to this please no multiple part Beyblade tips (Bearings, free spinning, etc.)
All of the parts I make are for the Metal series.
Thanks in advance!
Here is the link to the objects I have posted to Thingiverse. Please note I have not printed all of them so some may not work.
https://www.thingiverse.com/BeybladePartMaker/designs
RE: 3D Beyblade Tip Design Ideas - Shaady - Nov. 13, 2017
What about something similar to Defense/Press in Burst. I guess that would basically just be B/WB with the tabs to help regain balance.
RE: 3D Beyblade Tip Design Ideas - ayggdrasilgy - Nov. 13, 2017
what about a wide sharp
RE: 3D Beyblade Tip Design Ideas - Rebel Blader - Nov. 13, 2017
how about a metal ver of the yeilding driver?metal ver of bearing driver?and how about a merge driver with a metal sharp in center and plastic on the outside?
RE: 3D Beyblade Tip Design Ideas - MWF - Nov. 13, 2017
what about a POM b:d? i am interested how different it will work with the heavier metal saga beyblades. or a bearing ball/sharp/flat. basically any tip on a bearing. I wonder how CF will work on a bearing. you think you can try to make a spin track with a bearing in it? basically an improved free230.
lets call it Survivor230 (or if you can 145)
sorry if this is a lot.
(Nov. 13, 2017 10:58 AM)Rebel Blader Wrote: how about a metal ver of the yeilding driver?metal ver of bearing driver?and how about a merge driver with a metal sharp in center and plastic on the outside?
i think the metal saga equivalent of yielding is PD or do you mean a metal defence? and unless you mean a b:d with a metal contact surface the metal saga equivalent of bearing is b:d. it just has no POM
RE: 3D Beyblade Tip Design Ideas - Rebel Blader - Nov. 13, 2017
(Nov. 13, 2017 1:33 PM)MWF Wrote: what about a POM b:d? i am interested how different it will work with the heavier metal saga beyblades. or a bearing ball/sharp/flat. basically any tip on a bearing. I wonder how CF will work on a bearing. you think you can try to make a spin track with a bearing in it? basically an improved free230.
lets call it Survivor230 (or if you can 145)
sorry if this is a lot.
(Nov. 13, 2017 10:58 AM)Rebel Blader Wrote: how about a metal ver of the yeilding driver?metal ver of bearing driver?and how about a merge driver with a metal sharp in center and plastic on the outside?
i think the metal saga equivalent of yielding is PD or do you mean a metal defence? and unless you mean a b:d with a metal contact surface the metal saga equivalent of bearing is b:d. it just has no POM
What i mean to say is a bd with a metal tip and a metal defense or eternal metal wide defense.and also it would intresting to see a metal hole flat and a metal cf which is supported by bearings
RE: 3D Beyblade Tip Design Ideas - Flame-Byxis - Nov. 13, 2017
(Nov. 13, 2017 6:43 AM)Shaady Wrote: What about something similar to Defense/Press in Burst. I guess that would basically just be B/WB with the tabs to help regain balance.
Here you go:
Spoiler (Click to View)
![[Image: c7da2202001ef3739c67954b4c9dbb31_preview_featured.jpg]](https://thingiverse-production-new.s3.amazonaws.com/renders/f0/9b/bc/5e/fe/c7da2202001ef3739c67954b4c9dbb31_preview_featured.jpg)
Spoiler (Click to View)
![[Image: c7da2202001ef3739c67954b4c9dbb31_preview_featured.jpg]](https://thingiverse-production-new.s3.amazonaws.com/renders/43/2d/2f/64/90/c7da2202001ef3739c67954b4c9dbb31_preview_featured.jpg)
RE: 3D Beyblade Tip Design Ideas - Rebel Blader - Nov. 13, 2017
(Nov. 13, 2017 4:57 PM)Flame-Byxis Wrote:(Nov. 13, 2017 6:43 AM)Shaady Wrote: What about something similar to Defense/Press in Burst. I guess that would basically just be B/WB with the tabs to help regain balance.
Here you go:
@[ayggdrasilgy] is this what you mean?Spoiler (Click to View)
I am unable to make multiple part tips (such as ones with bearings) right now but I could color metal parts grey.Spoiler (Click to View)
Could u make the angle of the sharp part a bit low like that of the tip of revolve or burning kerbeus.also pls make metal hole flat
RE: 3D Beyblade Tip Design Ideas - Flame-Byxis - Nov. 13, 2017
(Nov. 13, 2017 5:27 PM)Rebel Blader Wrote: Could u make the angle of the sharp part a bit low like that of the tip of revolve or burning kerbeus.also pls make metal hole flat
Here is the Metal Hole Flat and the modified Wide Sharp:
Spoiler (Click to View)
![[Image: c7da2202001ef3739c67954b4c9dbb31_preview_featured.jpg]](https://thingiverse-production-new.s3.amazonaws.com/renders/e5/12/a1/65/6c/c7da2202001ef3739c67954b4c9dbb31_preview_featured.jpg)
![[Image: c1abfc2132a9c8d5048ffadc42f3f594_preview_featured.jpg]](https://thingiverse-production-new.s3.amazonaws.com/renders/9f/05/a5/ca/dd/c1abfc2132a9c8d5048ffadc42f3f594_preview_featured.jpg)
RE: 3D Beyblade Tip Design Ideas - dt1000 - Nov. 13, 2017
@[Flame-Byxis] Could you make a Right Rubber Giga Flat?
Also where did you make them?
Also please make a rubber giga ball.
RE: 3D Beyblade Tip Design Ideas - Flame-Byxis - Nov. 13, 2017
(Nov. 13, 2017 10:26 PM)dt1000 Wrote: Flame-Byxis Could you make a Right Rubber Giga Flat?
Also where did you make them?
Also please make a rubber giga ball.
Here are R2GF and RGB (sorry for the low quality images):
Spoiler (Click to View)
![[Image: 6fb3d6bf92365f4a9e0ed2ce268e5ab3_preview_featured.jpg]](https://thingiverse-production-new.s3.amazonaws.com/renders/f7/d7/28/ea/29/6fb3d6bf92365f4a9e0ed2ce268e5ab3_preview_featured.jpg)
![[Image: 20cb5fafd617ec36ed1593e58cbc4a6c_preview_featured.jpg]](https://thingiverse-production-new.s3.amazonaws.com/renders/28/f6/ae/d3/00/20cb5fafd617ec36ed1593e58cbc4a6c_preview_featured.jpg)
RE: 3D Beyblade Tip Design Ideas - dt1000 - Nov. 13, 2017
(Nov. 13, 2017 11:05 PM)Flame-Byxis Wrote:(Nov. 13, 2017 10:26 PM)dt1000 Wrote: Flame-Byxis Could you make a Right Rubber Giga Flat?
Also where did you make them?
Also please make a rubber giga ball.
Here are R2GF and RGB (sorry for the low quality images):
I used 3D Builder.Spoiler (Click to View)
Best Defensive Tip ever right there.
Can you make a Dragoon MF tip?
RE: 3D Beyblade Tip Design Ideas - Flame-Byxis - Nov. 13, 2017
(Nov. 13, 2017 11:08 PM)dt1000 Wrote: Best Defensive Tip ever right there.
Can you make a Dragoon MF tip?
I would need a picture of it. I don't know too much about plastics.
RE: 3D Beyblade Tip Design Ideas - dt1000 - Nov. 13, 2017
(Nov. 13, 2017 11:11 PM)Flame-Byxis Wrote:(Nov. 13, 2017 11:08 PM)dt1000 Wrote: Best Defensive Tip ever right there.
Can you make a Dragoon MF tip?
I would need a picture of it. I don't know too much about plastics.
It's just a tall, heavy rubber flat tip. Between F and XF size.
RE: 3D Beyblade Tip Design Ideas - Flame-Byxis - Nov. 13, 2017
(Nov. 13, 2017 11:13 PM)dt1000 Wrote: It's just a tall, heavy rubber flat tip. Between F and XF size.
So, like this?
Spoiler (Click to View)
![[Image: 03d4641465af466dde9a898ca56bb950_preview_featured.jpg]](https://thingiverse-production-new.s3.amazonaws.com/renders/94/7e/27/01/3b/03d4641465af466dde9a898ca56bb950_preview_featured.jpg)
RE: 3D Beyblade Tip Design Ideas - dt1000 - Nov. 13, 2017
(Nov. 13, 2017 11:22 PM)Flame-Byxis Wrote:(Nov. 13, 2017 11:13 PM)dt1000 Wrote: It's just a tall, heavy rubber flat tip. Between F and XF size.
So, like this?
Spoiler (Click to View)
Yeah.
RE: 3D Beyblade Tip Design Ideas - Flame-Byxis - Nov. 13, 2017
Here are some unrequested Beyblade tips I made:
Spoiler (Click to View)
![[Image: c7da2202001ef3739c67954b4c9dbb31_preview_featured.jpg]](https://thingiverse-production-new.s3.amazonaws.com/renders/a0/86/e1/ce/31/c7da2202001ef3739c67954b4c9dbb31_preview_featured.jpg)
RE: 3D Beyblade Tip Design Ideas - dt1000 - Nov. 13, 2017
(Nov. 13, 2017 11:42 PM)Flame-Byxis Wrote: Here are some unrequested Beyblade tips I made:
From top left to bottom right I call them: Double Hole Flat, Jaggy, Hole Sharp, Cubed, Double Ball, Flat Quad Support, Giga Hole Flat, Semi Wide Defense, Ball Quad Support, Sharp Edge, Arc, and Edge.Spoiler (Click to View)
Ooh, cool.
Here's a Rubber Giga Flat I made, make your own ver please.
![[Image: Rubber_Giga_Flat.png]](https://s20.postimg.org/9mtnnvrjd/Rubber_Giga_Flat.png)
@[Flame-Byxis]
RE: 3D Beyblade Tip Design Ideas - MWF - Nov. 14, 2017
can you make a rubber wide defense? What about an xtreme defense or giga defense?
RE: 3D Beyblade Tip Design Ideas - Flame-Byxis - Nov. 14, 2017
(Nov. 14, 2017 12:36 AM)MWF Wrote: can you make a rubber wide defense? What about an xtreme defense or giga defense?
Here is RWD and GD:
Spoiler (Click to View)
![[Image: 8c9c6bf3a0f258d93214151ab8596c3d_preview_featured.jpg]](https://thingiverse-production-new.s3.amazonaws.com/renders/7a/9f/2c/09/e5/8c9c6bf3a0f258d93214151ab8596c3d_preview_featured.jpg)
![[Image: 99e164e3b3691533f0aacd12cbe5b1d1_preview_featured.jpg]](https://thingiverse-production-new.s3.amazonaws.com/renders/ab/24/70/93/46/99e164e3b3691533f0aacd12cbe5b1d1_preview_featured.jpg)
@[dt1000]
Here is my version:
Spoiler (Click to View)
![[Image: 06ccbf78098515fb5b3b1c1ea0b25de3_preview_featured.jpg]](https://thingiverse-production-new.s3.amazonaws.com/renders/52/2f/15/58/18/06ccbf78098515fb5b3b1c1ea0b25de3_preview_featured.jpg)
RE: 3D Beyblade Tip Design Ideas - dt1000 - Nov. 14, 2017
(Nov. 14, 2017 1:44 AM)Flame-Byxis Wrote:(Nov. 14, 2017 12:36 AM)MWF Wrote: can you make a rubber wide defense? What about an xtreme defense or giga defense?
Here is RWD and GD:
Spoiler (Click to View)
@[dt1000]
Here is my version:
Spoiler (Click to View)
RGF would be the best attack tip ever.
RE: 3D Beyblade Tip Design Ideas - MWF - Nov. 14, 2017
(Nov. 14, 2017 1:45 AM)dt1000 Wrote:(Nov. 14, 2017 1:44 AM)Flame-Byxis Wrote: Here is RWD and GD:
Spoiler (Click to View)
@[dt1000]
Here is my version:
Spoiler (Click to View)
RGF would be the best attack tip ever.
that is if it can be controlled at all. so much surface area. so much grip.
RE: 3D Beyblade Tip Design Ideas - Suzaku-X - Nov. 14, 2017
(Nov. 14, 2017 1:46 AM)MWF Wrote:(Nov. 14, 2017 1:45 AM)dt1000 Wrote: RGF would be the best attack tip ever.
that is if it can be controlled at all. so much surface area. so much grip.
Just to be pedantic: Such a tip would be like Variable: Completely uncontrollable with like no stamina. Xtreme is already the ideal width.
RE: 3D Beyblade Tip Design Ideas - Shaady - Nov. 14, 2017
Not necessarily, as it may well be too difficult to control and maintain a flower pattern.
RE: 3D Beyblade Tip Design Ideas - dt1000 - Nov. 14, 2017
Right Rubber Flat Sharp
Well, if you could control it at least.