Design any existing Beyblade Burst to Gachi.

Rules:

• You need design Gachi Chip, Layer Weight and Layer Base.
  
• Existing Gachi Beyblades not allowed.
  
• 1 entry per user.
  
• Contest end 7. April.
  
• Winner 1 is most Votes collected user.
  
• Winner 2 is random.
  
• Winner 3 is selected by my.
  
• No real prizes (I search anyone who can make winner drawing to 3D CAD file)
  
• Disk, Disk Frame and Driver give 1 extra entry (apply on random winner).
  

Entries: (Click to View)

@[lilphilyb]: Entry
@[CitrusNinja3]: Entry
@[abidjkhan7]: Entry
@[MrBlade]: Entry
@[Adarsh Abhinav]: Entry
@[MWF]: Entry
@[Dt20000]: Entry
@[Suhasini]: Entry
@[Ntruder19]: Entry
@[UltimateMaster]: Entry
@[BurstMaster]: Entry
@[RightBurstUltra]: Entry
@[Grey Bey]: Entry
@[LegendSonu]: Entry

Exu Layer weight https://drive.google.com/file/d/1TI3G9f9...p=drivesdk
Axe Outer layer https://drive.google.com/file/d/1eTvytf4...p=drivesdk
Spriggan Gatinko chip https://drive.google.com/file/d/1rhcHgg7...p=drivesdk

Exu Layer weight https://drive.google.com/file/d/1TI3G9f9...p=drivesdk
Axe Outer layer https://drive.google.com/file/d/1ljzACr7...p=drivesdk
Spriggan Gatinko chip https://drive.google.com/file/d/1rhcHgg7...p=drivesdk

Added to entries.

---

Invites:

Invite

Invite

Invite

Invite

Invite

Invite

Invite

Invite

Invite

Invite

Invite

I will enter. I just don’t know how to upload the picture

---

The greatest story of all time didn’t start with ‘Once Upon a Time’ it started with ‘Welcome to the world of Beyblade’ instead.

Oh yeah, my favorite thing in the world is Beyblade! (And writing)

Idk go to:https://www.shantihershenson.com/

I will enter. I just don’t know how to upload the picture

Use google drive or imgur.

I will enter. I just don’t know how to upload the picture

Use google drive or imgur.

Thanks!

---

The greatest story of all time didn’t start with ‘Once Upon a Time’ it started with ‘Welcome to the world of Beyblade’ instead.

Oh yeah, my favorite thing in the world is Beyblade! (And writing)

Idk go to:https://www.shantihershenson.com/

Ok i will try lol

This seems interesting. I assume you invited me because of how much I've posted on the Create Your Own Beyblade Burst Thread?

This seems interesting. I assume you invited me because of how much I've posted on the Create Your Own Beyblade Burst Thread?

Yes. You post this thread and one more drawing contest.

Here's my entry. Sorry for any inconsistencies or asymmetrical spots, since I drew these all separately by hand.
 Assembled Combo:

Spoiler (Click to View)

Layer Parts:

Spoiler (Click to View)

Disk and Driver:

Spoiler (Click to View)

---

Description:

Spoiler (Click to View)

Full Combo: Twilight Hades Pressure Flurry ヘックス (Hekkusu/Hex)
Combo Type: Balance
GT Chip Description: (Hades) A GT Chip with the head of Hades on it. Has one pair of small teeth, followed by a pair of medium teeth, with a pair of big teeth at the end.
Layer Weight Description Pattern: (Hekkusu/Hex) Has all 6 stud spots filled in.
Layer Base Description: (Twilight) A Base with 2 big scythe-shaped blades and 4 small fin-shaped contact points. The scythe-shaped contact points have metal on top.
Disk Description: (Pressure) A disk with a simple design, but it’s very thick and is shaped somewhat like the 11 Disk.
Driver Description: (Flurry) A combination of the Zephyr and Destroy Drivers, but with a much smaller free-spinning dish. This Driver is of average height.

Be sure to make the attachment areas for the Axe outer layer

Can I join?

---

• “You gotta train like hell until the point where your hair falls out. That's the only way to become truly strong." -Saitama
  Check out my story, Beyblade Burst Zero!
  

https://worldbeyblade.org/Thread-Beyblade-Burst-Zero

Can I join?

I'm pretty sure anyone can join. @[ks123] invited some people, but as long as you can make a Bey, you have a chance.

Can I join?

I'm pretty sure anyone can join. @[ks123] invited some people, but as long as you can make a Bey, you have a chance.

Thanks so much. I’ll try to get my entry done either today or tomorrow.

---

• “You gotta train like hell until the point where your hair falls out. That's the only way to become truly strong." -Saitama
  Check out my story, Beyblade Burst Zero!
  

https://worldbeyblade.org/Thread-Beyblade-Burst-Zero

I fixed the axe outer layer [ks123]

Layer spriggen

Gachi chip

Layer weight

Layer spriggen

Gachi chip

Layer weight

I already made a GT Spriggan.

Layer spriggen

Gachi chip

Layer weight

I already made a GT Spriggan.

I tried my version

Here is my entry. All hail the Savior! https://docs.google.com/document/d/1-KUv...8vqbTz-Eb4

---

The mysterious one returns.

Just going to bump this thread to see if any more competition joins...

Just going to bump this thread to see if any more competition joins...

Yes, I wait more participants.

oKAY, i AM NOT GOOD AT IT.
dESCRIPTION- GT Chip- Longinus- A Chip that features 4 dragon heads coloured in silver, has 4 sets of high teeth. Spins Left
Weigh- Deru- Weight is mostly located On Outside
Base- Fierce- Left spin Base that has Awakening gimmick. When The Secondary Wings are hit, The Wings move to a position that increases Upper Attack, While Smash Attack remains the same.
Disc- Prevent- Incase Disc to layer contact occurs, prevent with Shift it's height, to prevent either scrape risk or burst.
Driver Recharge, Similar to circle survivor, but in attack. Launch in Full power to charge, it will unleash it's energy, then again charge, and release in the end for Out of the world LAD.

---

@[ks123] I fixed the axe, be sure the see my post again and see the new Axe Outer layer.

---

And please add hasbro slopes to The Spriggan Gatinko chip, i mainly have Hasbro.

@[ks123] I fixed the axe, be sure the see my post again and see the new Axe Outer layer.

---

And please add hasbro slopes to The Spriggan Gatinko chip, i mainly have Hasbro.

I'm pretty sure people still don't know how to make Hasbro slopes. Also, don't prepare yourself for victory already, there are still 10 more days until the competition ends.

Just make the area for the teeth, Make the base for the teeth only higher so that the base aligns with the rest of the teeth area, then remove the teeth.