Are drivers and their dash/metal counterparts considered identical parts? I need to know so I can combo build
Jul
02
Shin LA Burst Standard 7-2-22 (Hasbro Pro Series Stadium experimental event)
South Pasadena, CA Burst Format Unranked
02:00PM on 07/02/2022
Hosted by
3on3 Match Type
Type
3on3
Three Beyblades are prepared for each First Stage match, with all three being used.
Read moreAdmission
Admission
5 cash
Venue fee goes towards gazebo rental
5 cash admission
![[Image: OTCpgF0.jpg]](https://i.imgur.com/OTCpgF0.jpg)
We will meet and play at the Green X. The red dot 🔴 is just below the green X, which is location we can meet and register before our gazebo rental starts at 2:00PM.
PLEASE READ!!!
This is a Burst Standard event using the 3on3 first stage rule set and we will be playing in the Hasbro Pro Series Stadium. Also for this event, a beyblade is only considered knocked out if it lands in one of the the 4 pockets and cannot escape the pocket. A beyblade that bounces back into play from a pocket or any part of the stadiums walls is still considered to be in play. The play area is the entire stadium. Please refer to the rulebook link below to review the game play rules for the event:
https://docs.google.com/document/d/1mbjw...Q-c9A/edit
Challonge Links:
1st stage
https://worldbeyblade.challonge.com/zdyq9nun
Finals
https://worldbeyblade.challonge.com/y9ayyj
Prize:
![[Image: mall-of-toys-logo.png]](https://worldbeyblade.org/images/sponsor/mall-of-toys-logo.png){kind=logo}
Tournament Prizes – Sponsored by MallOfToys.com
The winner (1st place player) of this tournament will receive an online coupon code for products on MallOfToys.com, the official worldbeyblade.org sponsor! The online coupon code will be distributed via private message directly to the winner after this event has been successfully processed by WBO Staff.
- 1st Place: $30 USD Coupon Code
https://worldbeyblade.org/Thread-Coronav...ournaments
http://cdph.ca.gov/Programs/CID/DCDC/Pag...-2020.aspx
http://covid19.ca.gov/safer-economy/#county-status
WBO Tournament info:
If you have a question about the tournament, please post it in this tournament thread. Generally, that is the quickest way to get an answer. Also, please read through the tournament thread as your question may have already been answered. Private messages are inefficient as many members ask the same questions.
* Please be aware of the new community rules. Registering for the tournament and not showing up is a Tournament Violation. https://worldbeyblade.org/Announcement-Community-Rules
Event Schedule
1:30PM-1:50 PM Registration
1:50PM-2:00PM Bracket Set-up
2:00PM Announcements and Tournament Starts.
*Tournaments can last up to 5 hours
**Please meet for registration at the red dot shown on the map above.
***Once the registration concludes, players cannot be added.
Need-to-Know Information
1. Organizers, their Events, and Event Pages are independent of the World Beyblade Organization website or Fighting Spirits Inc.
1. Organizers, their Events, and Event Pages are independent of the World Beyblade Organization website or Fighting Spirits Inc.
Event Organizers are users independent of the World Beyblade Organization website, Fighting Spirits Inc., its directors, members, staff, or volunteers. Event Pages and Events are coordinated and operated separately from the operations of the World Beyblade Organization website or Fighting Spirits Inc, controlled solely by individual Event Organizers.
Under no circumstances will World Beyblade Organization, Fighting Spirits Inc., its directors, members, or staff be held liable for any direct, indirect, incidental, or consequential damages that arise from independent Events advertised on the website. .
2. Terms of Service
All event attendees and users of this website are subject to our Terms of Service.
(Jun. 19, 2022 3:31 AM)Vulcan Eagle Wrote: Are drivers and their dash/metal counterparts considered identical parts? I need to know so I can combo build
No they are not. You are allowed to use any driver variant in the same deck as long as it isn't the same exact driver.
Example: Hold, Hold', High Hold' (Allowed) / Xtreme, Xtreme', Xtreme' (Not Allowed, Repeats Xtreme')
(Jun. 19, 2022 3:31 AM)Vulcan Eagle Wrote: Are drivers and their dash/metal counterparts considered identical parts? I need to know so I can combo build
No they are not consider identical, and this is specifically stated in the rulebook in the following manner
- Including any combination of regular/Dash/Metal/High/SlingShock/HyperSphere/QuadDrive, etc. versions of a Driver is permitted.
This might be just me, but i feel like if the pro-series stadium were to work for standard that coming back from the pocket shouldn’t be allowed while in standard it should. Reason being that in the standard stadium the pockets are bigger and some things like mobius or rise, even drift on occasion, rely on wall bounces. In the pro series the pockets are small so only things with small tips like stuff on xtreme/quick will get stuck. Other stuff would always bounce out. But that’s just from my battles with other 4 pocket hasbro stadiums. I don’t actually have the pro stadium so it will likely be different. Excited to try it out!
Good luck with this event Shindog, and good luck to all the players!
Why do people say High Eternal is bad?
Anyone know when next tournament is in California?
Thank you for the response. Looking forward to future info.
Shindog, I have a question
The rulebook states “If the part with a mode change requires disassembly, the initial mode must be selected during the Beyblade Selection phase before presenting your Beyblade to the judge for inspection. After the first battle, it may only be changed once for the entire match.”
So if I were to have a bey in my 2nd or 3rd slot for the 3v3, would I be allowed to change it into high mode or low mode since the 2nd round is technically after the first battle?
The rulebook states “If the part with a mode change requires disassembly, the initial mode must be selected during the Beyblade Selection phase before presenting your Beyblade to the judge for inspection. After the first battle, it may only be changed once for the entire match.”
So if I were to have a bey in my 2nd or 3rd slot for the 3v3, would I be allowed to change it into high mode or low mode since the 2nd round is technically after the first battle?
(Jun. 26, 2022 1:20 AM)TheRogueBlader Wrote: Shindog, I have a questionShort answer is yes
The rulebook states “If the part with a mode change requires disassembly, the initial mode must be selected during the Beyblade Selection phase before presenting your Beyblade to the judge for inspection. After the first battle, it may only be changed once for the entire match.”
So if I were to have a bey in my 2nd or 3rd slot for the 3v3, would I be allowed to change it into high mode or low mode since the 2nd round is technically after the first battle?
This rule predates WBO incorporating 3on3 so it seems a bit odd. We are going to follow it literally, even if it doesn’t make total sense.
(Jun. 26, 2022 1:23 AM)Shindog Wrote:Ok, thanks for the confirmation(Jun. 26, 2022 1:20 AM)TheRogueBlader Wrote: Shindog, I have a questionShort answer is yes
The rulebook states “If the part with a mode change requires disassembly, the initial mode must be selected during the Beyblade Selection phase before presenting your Beyblade to the judge for inspection. After the first battle, it may only be changed once for the entire match.”
So if I were to have a bey in my 2nd or 3rd slot for the 3v3, would I be allowed to change it into high mode or low mode since the 2nd round is technically after the first battle?
This rule predates WBO incorporating 3on3 so it seems a bit odd. We are going to follow it literally, even if it doesn’t make total sense.
I am guessing not all 26 people are going to make it but if there is an even amount of people wouldn't there be no bys?
Are we going to use pro series?
We are going to use the pro series stadium. You can use pro series parts in this format
Are we allowed to use cho-z beys and gt beys?
(Jun. 29, 2022 8:47 PM)TheRogueBlader Wrote:(Jun. 29, 2022 8:42 PM)Valtshucool Wrote: Are we allowed to use cho-z beys and gt beys?You are allowed to use any bey, as long as you don’t combine hasbro and TakaraTomy parts into the same combo. Each combo must only have parts from 1 company. This is burst standard so anything is allowed.
I want to add that pro series parts are considered TT Parts and maybe mixed with TT parts. Also this rule primarily affects layers and drivers and does not affect disks.
(Jun. 29, 2022 10:02 PM)Shindog Wrote:Oh yeah, I was actually just about to ask in another thread if pro-series were compatible with TT. I knew the drivers were, but I wasn’t sure on the layers, good to know.(Jun. 29, 2022 8:47 PM)TheRogueBlader Wrote: You are allowed to use any bey, as long as you don’t combine hasbro and TakaraTomy parts into the same combo. Each combo must only have parts from 1 company. This is burst standard so anything is allowed.
I want to add that pro series parts are considered TT Parts and maybe mixed with TT parts. Also this rule primarily affects layers and drivers and does not affect disks.
Also in regards to the pro-series stadium, I was looking at a tournament video using it on YouTube and it seems like the blader’s main problem’s were that beys were going in the pocket and coming back out. But there was no “pocket bounce” rule like there is a “wall bounce” rule for standard. So I guess now I’m just curious since the same rule applies here, was the rule chosen simply because this is an experiment for the stadium? Or for another reason?
Yes, the rule in regards to the pocket escape is part of the experiment.
I'm going to have to back out from this due to my mother contracting covid
Hello all. My son (12 years) and I will be showing up at the tournament to check it out. He is a fan of beyblades but has no one to play with. Ever. So he’s excited to meet other bleyders.
We won’t be able to arrive on time but I am planning on taking him so we can watch part of the tournament and spin some blades off on our own somewhere. Is this cool?
Do you guys have a Facebook group or Instagram I can check out? Thanks.
Let it RIP.
We won’t be able to arrive on time but I am planning on taking him so we can watch part of the tournament and spin some blades off on our own somewhere. Is this cool?
Do you guys have a Facebook group or Instagram I can check out? Thanks.
Let it RIP.
