Make Your Own Beyblade Burst Character

Name: aira ycan
Layer: King apex
Disk: 12
Frame: lift
Driver: hunter

Name: aira ycan
Layer: King apex
Disk: 12
Frame: lift
Driver: hunter
(May. 28, 2018  6:14 AM)ultra destinus Wrote: This is my rival for my team, The Bladebreakers 2.0


Name: Ryuu Shirasagi 

Age: 10

Gender: Female


Appearance: Light blue hair and pale skin with light purple eyes. She normally wears a White shirt With a blue vest over it, along with grey jeans and white sneakers.

Personality: Ryuu is similar to Lui but the things she lacks are his sadistic traits, aggression, and rudeness. However, She's still a very determined blader and loves the sport as much as the other bladebreakers. She gets along with most bladers except Wakiya and Lui.

Beyblade: Revenger Ractoris. P. Revolve

Details: right spinning beyblade with 2 large metal wings for for OWD. It has a dragon motif on top of the layer

Extra Details: Ryuu secretly wishes Lui was never her brother because he makes her look like a bad guy as well as himself. Ryuu is friendly and kind meaning she makes friends easily, But Kody had trouble trusting her after what Lui did to his friends, but he warms up to her quickly. Ryuu doesn't think highly of Lui, so she never attends any of his matches. This makes Lui feel very sad on the inside, but he masks it as aggression and sadistic behavior.

EDIT: I made a mistake with her vest, so I changed it.
EDIT #2: I changed Ryuu's Beyblade's name cuz the previous wasn't fitting for her name.
EDIT #3: Ryuu now uses a Right Spinning bey, to match the first letter of her name.

(Jul. 08, 2018  2:14 AM)ultra destinus Wrote:
(May. 28, 2018  6:14 AM)ultra destinus Wrote: This is my rival for my team, The Bladebreakers 2.0


Name: Ryuu Shirasagi 

Age: 10

Gender: Female


Appearance: Light blue hair and pale skin with light purple eyes. She normally wears a White shirt With a blue vest over it, along with grey jeans and white sneakers.

Personality: Ryuu is similar to Lui but the things she lacks are his sadistic traits, aggression, and rudeness. However, She's still a very determined blader and loves the sport as much as the other bladebreakers. She gets along with most bladers except Wakiya and Lui.

Beyblade: Revenger Ractoris. P. Revolve

Details: right spinning beyblade with 2 large metal wings for for OWD. It has a dragon motif on top of the layer

Extra Details: Ryuu secretly wishes Lui was never her brother because he makes her look like a bad guy as well as himself. Ryuu is friendly and kind meaning she makes friends easily, But Kody had trouble trusting her after what Lui did to his friends, but he warms up to her quickly. Ryuu doesn't think highly of Lui, so she never attends any of his matches. This makes Lui feel very sad on the inside, but he masks it as aggression and sadistic behavior.

EDIT: I made a mistake with her vest, so I changed it.
EDIT #2: I changed Ryuu's Beyblade's name cuz the previous wasn't fitting for her name.
EDIT #3: Ryuu now uses a Right Spinning bey, to match the first letter of her name.

I messed this post up, but there isn't much i can do about it now :P
(May. 28, 2018  6:14 AM)ultra destinus Wrote: This is my rival for my team, The Bladebreakers 2.0


Name: Ryuu Shirasagi 

Age: 10

Gender: Female


Appearance: Light blue hair and pale skin with light purple eyes. She normally wears a White shirt With a blue vest over it, along with grey jeans and white sneakers.

Personality: Ryuu is similar to Lui but the things she lacks are his sadistic traits, aggression, and rudeness. However, She's still a very determined blader and loves the sport as much as the other bladebreakers. She gets along with most bladers except Wakiya and Lui.

Beyblade: Revenger Ractoris. P. Revolve

Details: right spinning beyblade with 2 large metal wings for for OWD. It has a dragon motif on top of the layer

Extra Details: Ryuu secretly wishes Lui was never her brother because he makes her look like a bad guy as well as himself. Ryuu is friendly and kind meaning she makes friends easily, But Kody had trouble trusting her after what Lui did to his friends, but he warms up to her quickly. Ryuu doesn't think highly of Lui, so she never attends any of his matches. This makes Lui feel very sad on the inside, but he masks it as aggression and sadistic behavior.

EDIT: I made a mistake with her vest, so I changed it.
EDIT #2: I changed Ryuu's Beyblade's name cuz the previous wasn't fitting for her name.
EDIT #3: Ryuu now uses a Right Spinning bey, to match the first letter of her name.
That is an interesting concept. Can I have her backstory or skmething?
(Jul. 08, 2018  3:30 AM)Hellibleri Wrote:
(May. 28, 2018  6:14 AM)ultra destinus Wrote: This is my rival for my team, The Bladebreakers 2.0


Name: Ryuu Shirasagi 

Age: 10

Gender: Female


Appearance: Light blue hair and pale skin with light purple eyes. She normally wears a White shirt With a blue vest over it, along with grey jeans and white sneakers.

Personality: Ryuu is similar to Lui but the things she lacks are his sadistic traits, aggression, and rudeness. However, She's still a very determined blader and loves the sport as much as the other bladebreakers. She gets along with most bladers except Wakiya and Lui.

Beyblade: Revenger Ractoris. P. Revolve

Details: right spinning beyblade with 2 large metal wings for for OWD. It has a dragon motif on top of the layer

Extra Details: Ryuu secretly wishes Lui was never her brother because he makes her look like a bad guy as well as himself. Ryuu is friendly and kind meaning she makes friends easily, But Kody had trouble trusting her after what Lui did to his friends, but he warms up to her quickly. Ryuu doesn't think highly of Lui, so she never attends any of his matches. This makes Lui feel very sad on the inside, but he masks it as aggression and sadistic behavior.

EDIT: I made a mistake with her vest, so I changed it.
EDIT #2: I changed Ryuu's Beyblade's name cuz the previous wasn't fitting for her name.
EDIT #3: Ryuu now uses a Right Spinning bey, to match the first letter of her name.
That is an interesting concept. Can I have her backstory or skmething?

I'll write it on the write your own stories thread. you can expect that soon.
Nice. Here’s my favorite creation that I wish to battle Ryuu:
Prometheus thy Unforgiving . Savior . Mold
A culture of Prometheus in the middle with chains holding him back. Each click lost loosens the chains and eventually, his arms and legs appear as 4 contact points.
Savior: A rigid disc with asymmetrical protrusions meant representing the mountain that cut Prometheus.
Mold: A black disk made of POM that has 6 points contacting the stadium at a rough 45• angle. You can “mold” the contact points (much like Prometheus did for humanity) to create either:
•6 protrusions each at their edge touching the stadium for a more balanced mode.
Or
•A flat POM driver. (Width equivalent to Destroy.)
(Jul. 08, 2018  5:19 PM)Hellibleri Wrote: Nice. Here’s my favorite creation that I wish to battle Ryuu:
Prometheus thy Unforgiving . Savior . Mold
A culture of Prometheus in the middle with chains holding him back. Each click lost loosens the chains and eventually, his arms and legs appear as 4 contact points.
Savior: A rigid disc with asymmetrical protrusions meant representing the mountain that cut Prometheus.
Mold: A black disk made of POM that has 6 points contacting the stadium at a rough 45• angle. You can “mold” the contact points (much like Prometheus did for humanity) to create either:
•6 protrusions each at their edge touching the stadium for a more balanced mode.
Or
•A flat POM driver. (Width equivalent to Destroy.)

Ok, We'll battle in PMs, since there isn't really a thread for all this
Unboun Skinwalker 13L. Emulate

uS is a ChoZ layer with a rough, 12 bladed perimeter. The metal is distributed outwards closer to the ends of the blades, though not all the way out. Because of this, the layer enjoys higher stamina than layers such as Emperor Forneus. The layer resembles a basic Burst layer combined with a more cylindrical version of Emperor Forneus with less CWD. In the middle of the layer is a misshapen head based on the Skinwalker, a Native American creature (?)

As the layer reaches two clicks, the gimmick---a free-spinning ring in the middle of the layer---activates, meant to lower friction from contact with the opponent layer. Because the layer conceals most of the gaps it does have, any recoil the gimmick causes is mitigated. Additionally, the combination of medium-high teeth and this layer's weight give it excellent burst resistance.

13 Lift

13 disk and Lift Frame. Usually lift is in Defense Mode (whichever has better LAD, don't remember rn)

Emulate: a defense/stamina driver with a free-spinning POM ball in a similar fashion to orbit, but with a wider diameter
(Jul. 08, 2018  5:42 PM)ultra destinus Wrote: Ok, We'll battle in PMs, since there isn't really a thread for all this

There actually is: This works, doesn’t it?
(Jul. 08, 2018  10:20 PM)Hellibleri Wrote:
(Jul. 08, 2018  5:42 PM)ultra destinus Wrote: Ok, We'll battle in PMs, since there isn't really a thread for all this

There actually is: This works, doesn’t it?

Oh that'll be fine! You're ok with whatever outcome i choose, right?
(Jul. 08, 2018  10:24 PM)ultra destinus Wrote:
(Jul. 08, 2018  10:20 PM)Hellibleri Wrote: There actually is: This works, doesn’t it?

Oh that'll be fine! You're ok with whatever outcome i choose, right?

Yeah.
(Jul. 09, 2018  1:16 AM)Hellibleri Wrote:
(Jul. 08, 2018  10:24 PM)ultra destinus Wrote: Oh that'll be fine! You're ok with whatever outcome i choose, right?

Yeah.

do you have a blader to battle Ryuu with? i need his name if you have one
Hi there I saw this thread and thought it was cool I have three beys + bladers to share.

Name: Quentin Feild
Appearance : very short,blond hair, pale skin, wears a red vest over a blue shirt,usually wears orange shorts,has green and black socks under green shoes.
Bey: Void Nothingness 10 reach needle (balance type)
Bey description : a big round layer with stamina wings on the side, colour is black with white flecks.

Bey gimick: when stamina wings active you can split the back off to create to separate wings that create a barrage mode.
Bey Avatar :big dragon,the color is black with white specks .

The second character is...
Name:Kian Salemi
Appearance : black messy hair, darkish skin,
Always wears black or gray shirts, brightly colored shorts,
Bey: Multi Crystillion 8 glaise nothing
Bey Appearance : gold in the middle blue on the left side and red on the right side, golden dragon head on the golden part.
Bey Gimick : beys layer rotates to fire smash mode,water repel mode and normal mode.
Bey Avatar : on normal mode avatar is dragon made out of crystal, on fire smash mode a dragon made out of fire, water repel mode a dragon made out of water.

Sorry thats all I can do today folks tomorrow I will reveal character number 3 Wink
(Jul. 09, 2018  1:32 AM)ultra destinus Wrote:
(Jul. 09, 2018  1:16 AM)Hellibleri Wrote: Yeah.

do you have a blader to battle Ryuu with? i need his name if you have one

Mary “Mackel” Finnick. Her first bey was Ash Argon but she earns Prometheus through a test of strength tournament.
(Jul. 09, 2018  11:28 PM)Hellibleri Wrote:
(Jul. 09, 2018  1:32 AM)ultra destinus Wrote: do you have a blader to battle Ryuu with? i need his name if you have one

Mary “Mackel” Finnick. Her first bey was Ash Argon but she earns Prometheus through a test of strength tournament.

Alright i'll be writing the battle now!
Damion Ornelas

Bey: flame dragon (attack type)
It has attack rings like Tyson first beyblade with the spikes, it's colored red and has a flat tip (like sprizens)

Special move: meteor strike
(Jul. 08, 2018  5:19 PM)Hellibleri Wrote: Nice. Here’s my favorite creation that I wish to battle Ryuu:
Prometheus thy Unforgiving . Savior . Mold
A culture of Prometheus in the middle with chains holding him back. Each click lost loosens the chains and eventually, his arms and legs appear as 4 contact points.
Savior: A rigid disc with asymmetrical protrusions meant representing the mountain that cut Prometheus.
Mold: A black disk made of POM that has 6 points contacting the stadium at a rough 45• angle. You can “mold” the contact points (much like Prometheus did for humanity) to create either:
•6 protrusions each at their edge touching the stadium for a more balanced mode.
Or
•A flat POM driver. (Width equivalent to Destroy.)

I may need the bey's special move, too.
(Jul. 10, 2018  3:44 PM)ultra destinus Wrote:
(Jul. 08, 2018  5:19 PM)Hellibleri Wrote: Nice. Here’s my favorite creation that I wish to battle Ryuu:
Prometheus thy Unforgiving . Savior . Mold
A culture of Prometheus in the middle with chains holding him back. Each click lost loosens the chains and eventually, his arms and legs appear as 4 contact points.
Savior: A rigid disc with asymmetrical protrusions meant representing the mountain that cut Prometheus.
Mold: A black disk made of POM that has 6 points contacting the stadium at a rough 45• angle. You can “mold” the contact points (much like Prometheus did for humanity) to create either:
•6 protrusions each at their edge touching the stadium for a more balanced mode.
Or
•A flat POM driver. (Width equivalent to Destroy.)

I may need the bey's special move, too.

 With only one click left: Titan Hero (you’d get the reference if yu wknow what prometheus was)
The Mold driver molding into a flatter mode: Creation Specialist
Remember Mytero?
beyblade: pI.10D.Ig
Layer: pyre Ifrit. Six sided layer with four being defensive walls and two being points. Each side is filled with metal. The gimmick is on the second click the walls of the 10 disk will line up with the walls on the layer and the dagger frame will line up with the attack points.
Disk: 10
Frame: Dagger
Driver: Ignite. An assault sized flat on a motor that activates on the second click.
I did a fan concept of Super Z Deathscyther. Now, I tried to find a thread that was appropriate to post beyblade concept renders without having to resort to making my own thread, I didn't actually make an OC, so I was unsure if the concept render alone was allowed, but this was my only option. The reason I didn't want to make my own thread for this was because I wasn't planning on doing more, and making a thread just for one render just seemed a little pointless to me. So for now, I'll just post it here.

[Image: fx3pli.png]

Yeah the watermark is pretty ugly I apologise, but it's there to hopefully prevent anyone from stealing it. Anyway, hope you like my render.
(Sep. 18, 2018  5:29 AM)Jinbee Wrote: I did a fan concept of Super Z Deathscyther. Now, I tried to find a thread that was appropriate to post beyblade concept renders without having to resort to making my own thread, I didn't actually make an OC, so I was unsure if the concept render alone was allowed, but this was my only option. The reason I didn't want to make my own thread for this was because I wasn't planning on doing more, and making a thread just for one render just seemed a little pointless to me. So for now, I'll just post it here.

[Image: fx3pli.png]

Yeah the watermark is pretty ugly I apologise, but it's there to hopefully prevent anyone from stealing it. Anyway, hope you like my render.

A beauty it is ?
Thank you!

By the way, credit to @[kjrules17] for the name suggestion.
Remember this blader?

Name: Zela Myr
Zela is currently the elite for England. She focuses on improving and sets her sights on surpassing Vis.
Beyblade: Oracle Delphi.1'Λ.H'
Layer: Oracle Delphi, this layer is an attack layer with two sloped contact points with slight upper attack with the gimmick of each click raising the contact points slightly so on click three it has strong force smash. The second tooth is taller than the rest to deal with the extra recoil. The two blades are filled with metal.
core: 1', first found on bX this core disk is off balance and gives a wobble effect.
frame: Λevel, a metal frame with off center weight distribution to work with 1'. Can either balance or double the wobble of 1'.
driver: Hold prime 

Special moves:
Inertia launch: spins and crouches while launching to give momentum to the launch.
Wild Impact: Uses the drastic wobble effect to attack at unpredictable angles.
Rewind launch: Inspired by the retro launch it adds a forwards dash to the launch.
Trinity Impact: Uses the momentum of the rewind launch to slam into the opponent to hit three times. Each impact causes Delphi to click, changing the attack type.

Facts: The Stride driver was thought up while she was training with the other elites. She was battling in a practice match against Vis and Valt when Vis pointed out that the stable driver was the wrong driver to use with such an attack based combo. It was a combination of inspiration from the volcanic driver and the beyblade knowledge of Vis and Zac. She didn't like the driver after using it so she put a stronger spring in the hold driver from her original beyblade.
Name: shinobi masa

Bey: Alpha serpent

It is the beyblade burst version of poison serpent and it is like bloody lougniues except it has seven king cobra heads instead of five dragon heads.
Dan Van Coppenolle

Bey:
Immortal Harambe
name: Eta Elektra
Eta is currently the elite for Egypt
bey: dη.2'P.Pn
Layer: dampen ηeptet. Right spin defense layer with high walls. The gimmick is that in the layer there is a free spinning steel ring that preserves inertia and lowers burst risk.
Disk:  2' heavy IWD to further bolster defense.
Frame: Proof
Driver: Pen. A wide defense shaped tip that is spring loaded and switches between normal and lower height on contact with the stadium. The mechanism that determines the height is similar to a pen.