Hasbro's Beyblade Burst Competitive Combos List & Public Discussion [W.I.P]

I dont really know any good combos if im being honest.
Its been a good while since I've did beyblade. But you guys could help me with combos. Im an attack type person not a defense or stamina. But i do a little bit of balance sometimes.
(Aug. 25, 2019  9:12 PM)bladekid Wrote:
(Aug. 25, 2019  2:01 PM)Ardmore Bladers Wrote: Maybe in hasbro only format, if you use the aK4 combo in Deck, than you would have a good chance of winning in same and opposite spin against the very light hasbro layer.
Not really, aK4 is really bad same spin stamina wise. I thought that it could be a better J3 because it would have better Stam, but no, it has worse same spin than J3 which is really sad. It is good in opposite spin as it combines the shape of J3 and the width of G3. Plus it's more consistent than J3 and better than G3 (at least on the right setups).

(Aug. 25, 2019  3:43 PM)MWF Wrote: aH4 might have some attack potential. Similar to Flash from the metal saga.

aH4.7B.Hn is able to KO or possibly Burst some defense amd stamina combos.
If I wasn't busy rn, I would scientifically explain why you are wrong in every way possible.

Could you please explain your reasoning? Because it lost the metal it is less of a stamina power house. So it can be used in attack combos similar to the idea of cR.7B. X'.

Just because it doesn't have a hyper agressive shape doesn't mean it can't be used as a hybrid attacker. It has good slopes.
(Aug. 28, 2019  11:18 AM)MWF Wrote:
(Aug. 25, 2019  9:12 PM)bladekid Wrote: Not really, aK4 is really bad same spin stamina wise. I thought that it could be a better J3 because it would have better Stam, but no, it has worse same spin than J3 which is really sad. It is good in opposite spin as it combines the shape of J3 and the width of G3. Plus it's more consistent than J3 and better than G3 (at least on the right setups).

If I wasn't busy rn, I would scientifically explain why you are wrong in every way possible.

Could you please explain your reasoning? Because it lost the metal it is less of a stamina power house. So it can be used in attack combos similar to the idea of cR.7B. X'.

Just because it doesn't have a hyper agressive shape doesn't mean it can't be used as a hybrid attacker. It has good slopes.
Weak contact points
Very low recoil
Rounded off contact points
Low friction contact points
The oval shape isn't oval enough to make up for the bad contact points
The weight doesn't compare to even the Hasbro attack types
Attack isn't very useful anyways

The only positive is that it can get into a good flower pretty easily and that constant attack can maybe burst something like W3 or maybe knock off the rP4 armor. But other than that, it's stamina/defence based contact points make it unideal for attack. And vL4 has good slopes and a oval shape, but that doesn't mean it's good for attack.
(Aug. 28, 2019  6:29 PM)bladekid Wrote:
(Aug. 28, 2019  11:18 AM)MWF Wrote: Could you please explain your reasoning? Because it lost the metal it is less of a stamina power house. So it can be used in attack combos similar to the idea of cR.7B. X'.

Just because it doesn't have a hyper agressive shape doesn't mean it can't be used as a hybrid attacker. It has good slopes.
Weak contact points
Very low recoil
Rounded off contact points
Low friction contact points
The oval shape isn't oval enough to make up for the bad contact points
The weight doesn't compare to even the Hasbro attack types
Attack isn't very useful anyways

The only positive is that it can get into a good flower pretty easily and that constant attack can maybe burst something like W3 or maybe knock off the rP4 armor. But other than that, it's stamina/defence based contact points make it unideal for attack. And vL4 has good slopes and a oval shape, but that doesn't mean it's good for attack.

That is understandable. Of course like you said, attack isn't that good. Especially with combos like aB3.Outer.Et-S possible. There are really only three attack layers that are even use able. X3, X4, and dH4 only because they have metal. X4 is extremely off balance and eventually will always be in buster mode. I don't know about slopes on H4 and X3 is isn't the most agressive.
But when combos like aB.Outer.Et-S or requiem S3.10W.Br are possible it isn't like you could do anything.
(Aug. 29, 2019  1:15 AM)MWF Wrote:
(Aug. 28, 2019  6:29 PM)bladekid Wrote: Weak contact points
Very low recoil
Rounded off contact points
Low friction contact points
The oval shape isn't oval enough to make up for the bad contact points
The weight doesn't compare to even the Hasbro attack types
Attack isn't very useful anyways

The only positive is that it can get into a good flower pretty easily and that constant attack can maybe burst something like W3 or maybe knock off the rP4 armor. But other than that, it's stamina/defence based contact points make it unideal for attack. And vL4 has good slopes and a oval shape, but that doesn't mean it's good for attack.

That is understandable. Of course like you said, attack isn't that good. Especially with combos like aB3.Outer.Et-S possible. There are really only three attack layers that are even use able. X3, X4, and dH4 only because they have metal. X4 is extremely off balance and eventually will always be in buster mode. I don't know about slopes on H4 and X3 is isn't the most agressive.
But when combos like aB.Outer.Et-S or requiem S3.10W.Br are possible it isn't like you could do anything.
First off, it's H3 not H4, second off, B3.Outer.Et-S isn't really good, third off, L3 is good and if you are good enough, you can beat B3 combos (especially the one you mentioned) with things like L3.A.Hn-S. also X4 won't eventually be in buster mode. All of the three you mentioned are a lot better attack wise than H4. Also tA4 has pretty good attack now. But like, you can do stuff about both of the mentioned combos. Even as a hybrid, you forgot that N3 is better in both attack and stamina when compared to H4.
(Aug. 29, 2019  3:05 AM)bladekid Wrote:
(Aug. 29, 2019  1:15 AM)MWF Wrote: That is understandable. Of course like you said, attack isn't that good. Especially with combos like aB3.Outer.Et-S possible. There are really only three attack layers that are even use able. X3, X4, and dH4 only because they have metal. X4 is extremely off balance and eventually will always be in buster mode. I don't know about slopes on H4 and X3 is isn't the most agressive.
But when combos like aB.Outer.Et-S or requiem S3.10W.Br are possible it isn't like you could do anything.
First off, it's H3 not H4, second off, B3.Outer.Et-S isn't really good, third off, L3 is good and if you are good enough, you can beat B3 combos (especially the one you mentioned) with things like L3.A.Hn-S. also X4 won't eventually be in buster mode. All of the three you mentioned are a lot better attack wise than H4. Also tA4 has pretty good attack now. But like, you can do stuff about both of the mentioned combos. Even as a hybrid, you forgot that N3 is better in both attack and stamina when compared to H4.

Ok. I have problems with getting good launches with L3 so I simply use L3.B.V the variable driver to act as a counter attacker against right spin.
aB3 on Et-S can out spin quite a few right spin combos other than bearing or possibly Xt-S.
The mechanism on X4 will wear out and eventually won't be able to hold the sword in normal mode. Especially with how there is only metal at the tip.
N3 has slopes that weardown a little too quickly, leading to poor burst resistance.
I didn't know if Hades was H3 or H4 so I just assumed it was H4
(Aug. 29, 2019  11:42 AM)MWF Wrote:
(Aug. 29, 2019  3:05 AM)bladekid Wrote: First off, it's H3 not H4, second off, B3.Outer.Et-S isn't really good, third off, L3 is good and if you are good enough, you can beat B3 combos (especially the one you mentioned) with things like L3.A.Hn-S. also X4 won't eventually be in buster mode. All of the three you mentioned are a lot better attack wise than H4. Also tA4 has pretty good attack now. But like, you can do stuff about both of the mentioned combos. Even as a hybrid, you forgot that N3 is better in both attack and stamina when compared to H4.

Ok. I have problems with getting good launches with L3 so I simply use L3.B.V the variable driver to act as a counter attacker against right spin.
aB3 on Et-S can out spin quite a few right spin combos other than bearing or possibly Xt-S.
The mechanism on X4 will wear out and eventually won't be able to hold the sword in normal mode. Especially with how there is only metal at the tip.
N3 has slopes that weardown a little too quickly, leading to poor burst resistance.
I didn't know if Hades was H3 or H4 so I just assumed it was H4

Can someone confirm this statement- 'N3 has slopes that weardown a little too quickly, leading to poor burst resistance.'?
Does absorb-s have good opposite and/ or same spin performance?
Is B3 tougher to KO than hS and/ or choz-s (TT and hasbro) on bearing combos?
Is turbo spriggan good on any combo? Can it replace B3 on bearing combos?
I made a crazy combo with Luinor L4 and I'd like some feedback, so its L4 12b Br. It's a lightweight but not too lightweitght thats meant to use the force of a heavy bey to spin steal.
(Dec. 09, 2019  11:58 PM)lilphilyb Wrote: I made a crazy combo with Luinor L4 and I'd like some feedback, so its L4 12b Br. It's a lightweight but not too lightweitght thats meant to use the force of a heavy bey to spin steal.

If you want honestly that is a horrible combo, especially for what you want it to do. If you want spin steal I recommend Spryzen Requiem Polish/0Cross Bearing.
Are there any top tier combos involving slingshock layers such as dP4 or tA4
(Yesterday  1:20 AM)lilphilyb Wrote: Are there any top tier combos involving slingshock layers such as dP4 or tA4

Not really. The layers have no metal so competitively the are not really useful. Turbo Spryzen might have some potential as well as Xcalius X4 and possibly Hades H4 but I’m not sure what for.