敵 (Teki/Enemy): A Weight that looks similar to 滅 (Metsu), but has Hexagons in all 6 spots.

I think you forgot about the Sen weight that has 6 hexagons  as well

---

Yeet.

The greatest story of all time didn’t start with ‘Once Upon a Time’ it started with ‘Welcome to the world of Beyblade’ instead


Sorry UltimateMaster for copying you

 敵 (Teki/Enemy): A Weight that looks similar to 滅 (Metsu), but has Hexagons in all 6 spots.

I think you forgot about the Sen weight that has 6 hexagons  as well

The thing is that 敵 would be in an N shape like 滅, where the bottom left and top right hexagons wouldn't be connected to the middle.

UW.Ph.Ctレ
Layer chip: Wolfram. Depicts a howling wolf. Has one Valkyrie hight tooth pair at the end but most of the lock is flat but with a slight slope. Right spin.
Layer weight: レ Re. It is the shape of Metsu but flipped.
Layer base: Undo. The base has two large deflecting blades similar to Gran or Heaven. It has a sublayer that affects the disk prongs and is spring-loaded to "unclick the layer."
Disk: Phantom. Based on Phantom from the metal saga this disk has a plastic core and a heavy metal ring for OWD
Driver: Catch. A low angle cone driver and normal height with a rubber ring outside of it that is on a bearing.

---

Highly Observant Hasbro Blader.

---

I think you forgot about the Sen weight that has 6 hexagons  as well

The thing is that 敵 would be in an N shape like 滅, where the bottom left and top right hexagons wouldn't be connected to the middle.

Oh.OK

---

Yeet.

The greatest story of all time didn’t start with ‘Once Upon a Time’ it started with ‘Welcome to the world of Beyblade’ instead


Sorry UltimateMaster for copying you

This is for post-contest ideas for beyblade burst. Feel free to share your ideas here


Format:

Layer (insert name here): Describe part here


Disk (insert name here): Describe part here


Driver (insert name here): Describe part here

EXAMPLE:

Layer (dragon): relatively circular, but blades cover the edge like scales, except where the head is, which is at the top of the beyblade. The clear plastic is tinted metallic crimson, and the inner plastic is white.

Disk (spread): released on spriggan, spread is a disk with the most even weight distribution.

Driver (grip): It's a hole rubber flat. It is a strong part because it has a hole in an attempt to preserve some stamina, while the rubber emphasizes attack and defense. The driver is pearl white, and the rubber is red.

Layer:king arthur, two metal blade sword that go cross the bey and a giant metal part at the center and at the corners at the bey, 2 giant rubber shields  and at the other corners two red metal balls 

disc: limited´,bigger and heavier version of limited and is golden

driver: unite´, a golden and red version of unite with a ´ spring, is going to be a good balance type  go here to see my draft


go to my mail to see the draft if you want

---

This reply has been deleted

---

*Prolly playing with Beyblades and figuring out the latest and best competitive combo for myself =D

How much do they cost?

What do you mean? This is just a thread to share your ideas for a Bladers and bey, not a place where people sell you a 3D printed bey.

---

10 letter word.

GT Chip - D (Dragonis) - Depicts a Dragon with red eyes with 2 teeth of tall height

Weight - 月(Getsu) - is basically a reversed Metsu

Base - F (Fang) - has 6 blades on it (3 of which have metal on it)

Disk - Vn (Vanguard)

Driver - Ds' (Destroy')


Fang Dragonis Vanguard Destroy'月

---

PFP: Baby picture of me and one of my irl friends / ANY PRONOUNS

name:thunder Hydroblivion
layer:hydroblivion
a circular shaped layer. akin to achilles A4 layer. it is a blue and red color layer. the middle motif shows the extict animal. megaladon.sides on the contact points are rubber. the layer is a right spinning bey. it is also the heaviest layer
discxcalibrate
akin to boost.the blades are longer and akin to vanguard.there is rubber-like disc frame.on the edges.it is the heaviest.yet it is also a spin steal potential disc.
performance tip:breaker
just like the performance tip evolution.but with strong springs.blade like things on edges.and can easily worn out

ha thats great

BH.Rs今
Layer chip/weight: Hornfell. It has medium teeth with a built-in gen weight. It cannot take any with a center hexagon. left spin.
Layer weight:Ima. Does not have a center hexagon, has all six outer hexagons. the middle hexagons are Goku weight while the side hexagons are Sen weight.
Layer base/disk: Breaker. It has three large deflecting blades that after a few hits free spin on a track similar to the gimmick on the phoenix beys. The free-spinning part has metal to increase OWD.
Driver: Reserve. A wide-angle cone with a heavy metal piece that spins. This allows for more inertia to be preserved. The metal piece is slanted to improve LAD.

---

Highly Observant Hasbro Blader.

---

Beyblade idea

Spoiler (Click to View)

i know this is too OP

name: Battle Ares Warlock Zoom Revive Ram

Chip: Ares- a chip that has 4 strong teeth and as the name says, ares on the chip holding a sword and shield

Base: Battle- A base that is super heavy, with the weight of zwei and perfect phoenix combined. It has a metal sword on one side of the layer and a shield on the other, thus making it unbalanced. the shield pops out at the start of the battle and is made of rubber to deflect and absorb any incoming attacks. It has 1 burst stopper.

Zoom- a disc that has a perfectly circular core made of metal and the outside is half rubber, half plastic. This disc overall weighs 27.86 grams.

Revive: a driver with a battery designed to retract the flat rubber attack tip when on low stamina and replace it with a infinite spinning bearing tip

Ram: a super heavy weight with combined weights of goku,diabolos and the stopper of gen

---

Yeet.

The greatest story of all time didn’t start with ‘Once Upon a Time’ it started with ‘Welcome to the world of Beyblade’ instead


Sorry UltimateMaster for copying you

Name: Sword Xcalibur
GT Chip: Xcalibur- Has 3 tall teeth. Has a design with a sword going down the middle. The sword is made of metal. The chip is red.

Layer Base: Sword- The usual xcalibur design but the bottom half is shaped like a diamond and the upper half is rounder. The sword tip is longer than previous xcalibur designs. The side parts that protrude out also are longer than on previous xcalibur designs.

Disk: Xtra- The metal part of the disk is diamond shaped. The red plastic on the outside is also diamond shaped. That forge disk is one of the heaviest ones.


Driver: Blade- The driver is gold colored and has a blade shape on the bottom of it made of metal. It is about as thick as the very bottom part of volcanic. However, the blade shape does not move and is fixed in place.

Weight: Ken- Kind of like half Retsu and half Metsu. It is unbalanced and is one of the heavier weights.

---

Hey there! My name is BuilderROB and I am an organizer who hosts tournaments in North Carolina.

Spoiler (Click to View)

Spoiler (Click to View)

GT Chip: Drago - is a Left Spin chip with teeth of standard height

Weight: Netsu (熱) - is kinda like Go but heavier

Base: Revenge - has 2 Rubber blades and 2 Metal blades

Disk: 8'

Frame: Wall

Driver: Zephyr'

Revenge Drago 8'W Z' 熱

---

PFP: Baby picture of me and one of my irl friends / ANY PRONOUNS

Layer ( rinousorus ) mostly circular but blades are cover with 3 big spikes disk ( x4 disk ) it's mostly even driver ( rock c) it make the blade super easy to control my dream bey has a green layer a silver disk and a blue driver its name is omega green rinousorus facts about it's heavy it's a balance type it has 3 moves omega horn attack super whip super rush attack it moves quick for a heavy hey in the super rush attack it's like spring launch

Champion Valkyrie Zenith' X"
The Champion Valkyrie layer is a dual spinning attack type layer featuring 3 main contact points, and each contact point is plastic, but has metal supporting the plastic.
Zenith' is an upgrade to zenith, and the plastic part of the Zenith disk would be rubber, and the rubber part of the original Zenith is metal.
Xtreme" is a much tighter version of the Xtreme' driver. The "spring lock makes any beyblade practically unburstable. However, the Xtreme" driver has a wider rubber spin surface, causing spin loss to occur much faster than the Xtreme and Xtreme' counterparts.
I hope everyone enjoys my Valkyrie design.

---

Player and Organizer for NC Beyblade | Use code "HASHTAGFAFNIR" for 8% off on BeysAndBricks!

Strike Samurai Katana Dagger' X'

Chip: Samurai is a chip with 4 strong teeth like the strong teeth on Union Achilles. It has a picture of a samurai dressed in black , holding a sword in each hand

Base: Strike is a somewhat heavy-light base with metal swords around the base, akin to cho-z Achilles and the inside is made of a mix between plastic and metal

Katana: a heavy disc with a perfectly balanced outer and inner core. Can hold a frame only

Dagger': a full metal Dagger frame

X': just xtreme'

---

Yeet.

The greatest story of all time didn’t start with ‘Once Upon a Time’ it started with ‘Welcome to the world of Beyblade’ instead


Sorry UltimateMaster for copying you

Layer- Yin yang, this layer looks like your typical yin yang and has 5 exotic spikes covering half the blade on the black side; this side will be the most weighted for its most powerful Attack (yin yang ripper) on the white side it has a scimitar blade for perying attacks. This part is made of pure diamond titanium.

The disks function will be to keep the bey's balance counter balance from the heavier black side. This part is made of pure diamond titanium. This part can also absorb any attack thrown at it. This part is so shiny or has been known to blind its enemies

The driver is a combination of stamina and Attack, and will make the bay spin so fast that if used properly will destroy any bay it comes across. This part is made of pure diamond titanium, and painted a dark black.

This bay is known as "D Yin Yang" (the D stands for destructor)

Layer:Crash Saggitarrio
Forge Disk:16
Disk Layer:Crash
Performance Tip:Enforce
Type:Stamina

Demon Emperor

LG.Sl.Bs'向
Limit Grindnyr Slip Boost Dash Mukai
Layer Base: Limit(L). An attack type base with two main smash attack blades weighted by metal. The secondary sweeping impact points are rubber. Can't take weights with a center hexagon.
Layer weight: Mukai(向). An extended right spin Metsu with a sou middle circle but no center hexagon.
Layer Chip: Grindnyr(G). Depicts a wolf-like beast. Seven moderate teeth. Right spin.
Disk: Slip(Sl). Plastic core with a heavy and free-spinning Metal ring. The core has a mechanism that locks the ring at low velocities. The disk will only catch on Boost
Driver: Boost dash(Bs'). A rubber flat driver with a wind-up system on a high torque gearing. The mechanism is made to work with Slip to where when the disk releases, the catch on the driver does as well, Speeding up the beyblade's rotation speed at the beginning of a battle. The gimmick will only catch on Slip.

in all, this is a strong attacker with momentum preservation and burst resistance in mind.

---

Highly Observant Hasbro Blader.

---

ShockWave Dragon
The layer is yellow on the sides and in the middle but the rest of it is red.
Disk:Heaven
It is like bushin ashura’s Hurricane disk but the revolving part is red and it is 2 inches lower
Tip:Zero
This tip is like extend but it can only raise and lower it’s height and not change modes it is also yellow.
Typeefense
Speacial Moves
Zero Defence:Zero defense is where shockwave dragons zero tip extends up mid battle and then uses the heaven’s revolving part so when the bey hits it’s attack is Just gets reflected like it goes around the bey.
Heaven Crash:Heaven crash is where when is still using zero defense the revolving part on the heaven disk locks in and then the zero tip rextends down when the beyblade attacks and then uses the heaven revolving part to smash down on the burst layer.
ShockWave BreakhockWave Break is where when it is still using zero defense and then when the bey gets to a certain amount of spin speed the zero tip starts to slowly dextend down and then when it goes fully down is starts to to spin out of control then it hits the opponents bey it goes into the center then it starts to attack the other bey with a lot of force until it bursts.
Typeefense

---

Samurai Griffin
Forge Diskword
It’s like the one disk but with one sword and more weight on the edges.
Disk Layer:1+
It is like 1 but with two swords one in the front and on the back.
Performance diskarthquake
It’s like the performance tip on Storm Capricorn but more to the side.
Speacial Moves
Twin Sword Drive: You use the earthquake driver to bounce around the stadium and then comes in for the attack with both the swords on the layer.
Type:Attack

---

Thunder Pegasus
Disk:Flight
Disk Layer:30
Tip:Bounce

Name: Chaos Destroctor
Type: Balance type
Layer: Has fire blades on 1 side and Spikes that stick out on other side
Disc: Has Diabolos disc bot its red and black
Driver: Rubber attack type bottom bot has defense type in the middle of the rubber

---

Name: Chaos Destroctor
Type: Balance type
Layer: Has fire blades on 1 side and Spikes that stick out on other side(spikes are rubber so can absord power
Disc: Has Diabolos disc bot its red and black
Driver: Rubber attack type bottom bot has defense type in the middle of the rubber

Conflict Siegfried Vanguard Versa (Goku)

The Sigfried chip depicts a fiery warrior, with details of a sword and a helmet adorning the Chip. It has Valkyrie style teeth.

The Conflict Base is like a combination of Grand and Judgement, more round than Judgement, and sloped as if to provide Upper attack. The ends of the slopes come to a blunt point for Attack from a Right Spin perspective.

Versa is a copy of Driger S' tip, a sharp metal tip with the base being almost flat.

---

Spoiler (Click to View)

Kai-V is an omniscient being who imparts starving mortals such as ourselves with the morsels of Beyblade foreknowledge we so unknowingly desired. She does so not out of grace, but because it pleases her. May the great Kai-V excuse your insolence and show mercy upon your blader spirit.

Beymen.

Evil is very bad though... There is just nothing good to do with it.

They do not, because clearly you punch them with these brass knuckles.

ÞQ.Ph.Rs無幻
Layer chip(Q): Quinhald. portrays a hound. Right spin with A steep slope followed by a tall tooth.
Layer Weight(無幻): Mu + Gen. Mu is a weight with no center. It has six hexagons with the inside leaving space for a Gen weight.
Layer Base(Þ): Threat. Attack type layer base with four sweeping contacts points that hook slightly at the end.
Disk(Ph): Phantom. Plastic core with a heavy metal ring.
Driver(Rs): Rush. Rubber flat slightly wider than Xtreme but with extremely soft rubber.

---

Highly Observant Hasbro Blader.

---