(Apr. 17, 2019 11:49 PM)omega263 Wrote: This is my bey Zenith Omegian
It's a left spin balance tips bey
Https://drive.google.com/file/d/1YxJVgwv...p=drivesdk
We dont have access my guy
(Apr. 17, 2019 11:49 PM)omega263 Wrote: This is my bey Zenith Omegian
It's a left spin balance tips bey
Https://drive.google.com/file/d/1YxJVgwv...p=drivesdk
(Apr. 19, 2019 3:07 PM)MagixG Wrote:(Apr. 17, 2019 11:49 PM)omega263 Wrote: This is my bey Zenith Omegian
It's a left spin balance tips bey
Https://drive.google.com/file/d/1YxJVgwv...p=drivesdk
We dont have access my guy
(May. 02, 2019 11:11 PM)The1Pheonix Wrote: Overdrive Leviathan (L4)
Top has five dragon heads with small spikes on them. When Spinning is weak Spikes go into the heads.
Disk: Zenith found on Cho z Valkyrie
Driver: Divine. Has Lots of speed with some stamina. Like Dead Hades tip but with rubber.
(Jul. 14, 2015 8:35 PM)Siⱺn Wrote: Please follow the format in the first post please. Thank you!
Can I show a picture of it and do you make them for free
(Jul. 08, 2015 3:06 PM)Siⱺn Wrote: This is for post-contest ideas for beyblade burst. Feel free to share your ideas here
Format:
Layer (insert name here): Describe part here
Disk (insert name here): Describe part here
Driver (insert name here): Describe part here
EXAMPLE:
Layer (dragon): relatively circular, but blades cover the edge like scales, except where the head is, which is at the top of the beyblade. The clear plastic is tinted metallic crimson, and the inner plastic is white.
Disk (spread): released on spriggan, spread is a disk with the most even weight distribution.
Driver (grip): It's a hole rubber flat. It is a strong part because it has a hole in an attempt to preserve some stamina, while the rubber emphasizes attack and defense. The driver is pearl white, and the rubber is red.
(Jun. 17, 2019 8:16 AM)Tikitiki662 Wrote: Name: eclipse solisIt’s confusing, but good!
Type: balance
Layer: solar flare this layer has sun like spires with curves and in between the spires are lowely placed circles with spines and the design is basically a sun with two black eyes in the middle and it's colored orange, dark red and black
Forge Disk: disk zenith it has three metal Zs on each side with rubber on the outside which reduces recoil it's heavy with a lower center of gravity to focus defensive power while retaining a good amount of offensive ability
Driver: flugel with the ultimate reboot tip but instead of a point it's a ball tip in order to keep stamina and speed without loss in defensive or offensive power
Spin direction:
left
Tell me your ideas if this is good or no thx
By the way eclipse solis's owner is Sakai Akagi
(Jun. 17, 2019 10:37 PM)Tikitiki662 Wrote: is it that bad no one will reply
(Jun. 17, 2019 11:11 PM)CitrusNinja3 Wrote:(Jun. 17, 2019 10:37 PM)Tikitiki662 Wrote: is it that bad no one will reply
It's mostly that not many people post here anymore. I used to post here a lot, but stopped a couple months ago because it takes a lot of brain power to make as many Beys as I have, and I'm definitely not the person that posted here the most.
(Jun. 17, 2019 11:11 PM)CitrusNinja3 Wrote:(Jun. 17, 2019 10:37 PM)Tikitiki662 Wrote: is it that bad no one will reply
It's mostly that not many people post here anymore. I used to post here a lot, but stopped a couple months ago because it takes a lot of brain power to make as many Beys as I have, and I'm definitely not the person that posted here the most.
Oh well sorry I not know
(Jun. 17, 2019 11:05 PM)CheetoBlader Wrote:(Jun. 17, 2019 8:16 AM)Tikitiki662 Wrote: Name: eclipse solisIt’s confusing, but good! Thanks but what's the confusing part to where I can fix it
Type: balance
Layer: solar flare this layer has sun like spires with curves and in between the spires are lowely placed circles with spines and the design is basically a sun with two black eyes in the middle and it's colored orange, dark red and black
Forge Disk: disk zenith it has three metal Zs on each side with rubber on the outside which reduces recoil it's heavy with a lower center of gravity to focus defensive power while retaining a good amount of offensive ability
Driver: flugel with the ultimate reboot tip but instead of a point it's a ball tip in order to keep stamina and speed without loss in defensive or offensive power
Spin direction:
left
Tell me your ideas if this is good or no thx
By the way eclipse solis's owner is Sakai Akagi
(Jun. 18, 2019 2:16 AM)Syphoon Rafinix Wrote: I have my beyblade called Syphoon Rafinix
Top layer description: five blades yellowish orange green in the middle
Middle Layer name: 12
Shield description: Blue with small flames
Bottom layer name: Rotate
Type: balance
(Jul. 08, 2015 3:06 PM)Siⱺn Wrote: This is for post-contest ideas for beyblade burst. Feel free to share your ideas here
Format:
Layer (insert name here): Describe part here
Rinder Spriggan
Disk (insert name here): Describe part here
0Gaurd
Driver (insert name here): Describe part here
Fang
Layer (dragon): relatively circular, but blades cover the edge like scales, except where the head is, which is at the top of the beyblade. The clear plastic is tinted metallic crimson, and the inner plastic is white.
Disk (spread): released on spriggan, spread is a disk with the most even weight distribution.
Driver (grip): It's a hole rubber flat. It is a strong part because it has a hole in an attempt to preserve some stamina, while the rubber emphasizes attack and defense. The driver is pearl white, and the rubber is red.
(Jul. 08, 2015 3:06 PM)Siⱺn Wrote: This is for post-contest ideas for beyblade burst. Feel free to share your ideas here
Format:
Layer (Lotus Saw) like a cirrcular saw gold with a purple outline design to cut though air easier to make its fast spikes pointed to the right has a lotus flower logo with 6 bolts of purple lightning edging toward the edge
Disk (lotus plate): simalar to omni odax but flat around the edges
Driver (psycho): has 2 modes. Stamina mode- round flat ish Speed mode- bottom is twisted a sharp tip that can still support balance rubber bottom to give better grip and speed
Nametorm Lotus
Sorry if u can under stand ill draw it though
(Jul. 08, 2015 3:06 PM)Siⱺn Wrote: This is for post-contest ideas for beyblade burst. Feel free to share your ideas here
Format:
Layer (Lotus Saw) like a cirrcular saw gold with a purple outline design to cut though air easier to make its fast spikes pointed to the right has a lotus flower logo with 6 bolts of purple lightning edging toward the edge
Disk (lotus plate): simalar to omni odax but flat around the edges
Driver (psycho): has 2 modes. Stamina mode- round flat ish Speed mode- bottom is twisted a sharp tip that can still support balance rubber bottom to give better grip and speed
Nametorm Lotus
Sorry if u can under stand ill draw it though
(Jul. 08, 2015 3:06 PM)Siⱺn Wrote: This is for post-contest ideas for beyblade burst. Feel free to share your ideas here
Format:
Layer (Lotus Saw) like a cirrcular saw gold with a purple outline design to cut though air easier to make its fast spikes pointed to the right has a lotus flower logo with 6 bolts of purple lightning edging toward the edge
Disk (lotus plate): simalar to omni odax but flat around the edges
Driver (psycho): has 2 modes. Stamina mode- round flat ish Speed mode- bottom is twisted a sharp tip that can still support balance rubber bottom to give better grip and speed
Nametorm Lotus
Sorry if u can under stand ill draw it though
(Jul. 08, 2015 3:06 PM)Siⱺn Wrote: This is for post-contest ideas for beyblade burst. Feel free to share your ideas here
Format:
Layer (Lotus Saw) like a cirrcular saw gold with a purple outline design to cut though air easier to make its fast spikes pointed to the right has a lotus flower logo with 6 bolts of purple lightning edging toward the edge
Disk (lotus plate): simalar to omni odax but flat around the edges
Driver (psycho): has 2 modes. Stamina mode- round flat ish Speed mode- bottom is twisted a sharp tip that can still support balance rubber bottom to give better grip and speed
Nametorm Lotus
Sorry if u can under stand ill draw it though
(Jul. 08, 2015 3:06 PM)Siⱺn Wrote: This is for post-contest ideas for beyblade burst. Feel free to share your ideas here
Format:
Layer (Lotus Saw) like a cirrcular saw gold with a purple outline design to cut though air easier to make its fast spikes pointed to the right has a lotus flower logo with 6 bolts of purple lightning edging toward the edge
Disk (lotus plate): simalar to omni odax but flat around the edges
Driver (psycho): has 2 modes. Stamina mode- round flat ish Speed mode- bottom is twisted a sharp tip that can still support balance rubber bottom to give better grip and speed
Nametorm Lotus
Sorry if u can under stand ill draw it though
(Jul. 08, 2015 3:06 PM)Siⱺn Wrote: This is for post-contest ideas for beyblade burst. Feel free to share your ideas here
Format:
Layer (Lotus Saw) like a cirrcular saw gold with a purple outline design to cut though air easier to make its fast spikes pointed to the right has a lotus flower logo with 6 bolts of purple lightning edging toward the edge
Disk (lotus plate): simalar to omni odax but flat around the edges
Driver (psycho): has 2 modes. Stamina mode- round flat ish Speed mode- bottom is twisted a sharp tip that can still support balance rubber bottom to give better grip and speed
Nametorm Lotus
Sorry if u can under stand ill draw it though
(Jul. 20, 2019 1:58 AM)SecretlyPegasus Wrote: Layer: Infinity Cuga - a black and blue dual layer that has 1 main contact point in the shape of a wing.
Dual-Spin, Balance
Disk: 7-Vortex - a.k.a. the best disk in my opinion.
Driver: Break - imagine the jaggy driver filed down with a hole in it.
(Jul. 20, 2019 2:03 AM)boigamer25 Wrote:Basically(Jul. 20, 2019 1:58 AM)SecretlyPegasus Wrote: Layer: Infinity Cuga - a black and blue dual layer that has 1 main contact point in the shape of a wing.
Dual-Spin, Balance
Disk: 7-Vortex - a.k.a. the best disk in my opinion.
Driver: Break - imagine the jaggy driver filed down with a hole in it.
So, about your break driver. It's pretty much Jaggy and Zephyr mixed together?