So how heavy is 1' compared to the original 1?

I heard it weighs over 22 grams

---

Hey there! My name is BuilderROB and I am an organizer who hosts tournaments in North Carolina.

Spoiler (Click to View)

Spoiler (Click to View)

My l/R String launcher and Bey launcher L from the gold dragon ver. Of L2 had their strings messed up, I wound up the coils on both of them, so they're both good as new! Also, big thanks to @[Kevo] 's Tutorial on fixing the l/r string launcher, Thanks man!

---

Howdy. I'm Busy, Kentucky Organizer. I've currently got a few victories under my belt, but don't let that fool you... I'm a complete idiot most of the time.

Hi guys! So, since yesterday night i had nothing to do i decided to make a test: replacing x3's god chip with lS3's metal one. Well, the results are unbelievable: from 15,65 grams to 17,90 grams! Also, a metal weight in the center of the layer adds a LOT of balance which x3 needed so much. Just felt to share with you this amazing mod (ILLEGAL, although AWESOME), imo it could compete even with some cho-z layers and if sX from TT is heavier (i'm almost sure it is), then you might get an extra-extra weight of 0,40/ 0,50 grams circa. Awesome! Mgcs are useless, too light while lS3 has a 2,50 grams-all metal chip (TT's Legend Spriggan one is around 2,70 grams. Yay, heavier!!!). Furthermore, as i previously mentioned, the increase just goes where it's needed.

Hi guys! So, since yesterday night i had nothing to do i decided to make a test: replacing x3's god chip with lS3's metal one. Well, the results are unbelievable: from 15,65 grams to 17,90 grams! Also, a metal weight in the center of the layer adds a LOT of balance which x3 needed so much. Just felt to share with you this amazing mod (ILLEGAL, although AWESOME), imo it could compete even with some cho-z layers and if sX from TT is heavier (i'm almost sure it is), then you might get an extra-extra weight of 0,40/ 0,50 grams circa. Awesome! Mgcs are useless, too light while lS3 has a 2,50 grams-all metal chip (TT's Legend Spriggan one is around 2,70 grams. Yay, heavier!!!). Furthermore, as i previously mentioned, the increase just goes where it's needed.

Obviously Legend Spriggan's metal chip is heavier than Legend Spryzen's because it's thicker than Spryzen's.

---

LET IT RIP!!

wbba profile

My two beys Earth Eagle, Dark Libra, forever lost,

you'll always be the one that started my hobby

and the Beyblade Geeks rekindled it.

[Image: pdXOXLR.jpg]

Here we go!
[Image: 6rn1ci.jpg]

Respect to gigagaminggamer for his comment on @[Kevo]'s bX combo video.

---

Hi! I've been on and off this site for a while now, but if you're new or just seeing this I hope you enjoy your stay on the WBO.

Respect to gigagaminggamer for his comment on @[Kevo]'s bX combo video.

I don't see the comment?

Respect to gigagaminggamer for his comment on @[Kevo]'s bX combo video.

I don't see the comment?

Hey Kevo! I’ve been a fan for awhile and I think I’m going to start a channel this week! I’ve worked so hard editing videos and logos and feel somewhat ready! Do you have any advice for me on how to provide good content and get views! You’re awesome! God bless and thx!

---

I don't see the comment?

Hey Kevo! I’ve been a fan for awhile and I think I’m going to start a channel this week! I’ve worked so hard editing videos and logos and feel somewhat ready! Do you have any advice for me on how to provide good content and get views! You’re awesome! God bless and thx!

---

Awesome! Honestly my best advice is to make your own unique content and let your audience find you. The Beytuber community is fairly small and niche so it's pretty easy to get your name out there. Consistency is also key to maintaining an active viewer base. 

Hope this helps!

Hey Kevo! I’ve been a fan for awhile and I think I’m going to start a channel this week! I’ve worked so hard editing videos and logos and feel somewhat ready! Do you have any advice for me on how to provide good content and get views! You’re awesome! God bless and thx!

---

Awesome! Honestly my best advice is to make your own unique content and let your audience find you. The Beytuber community is fairly small and niche so it's pretty easy to get your name out there. Consistency is also key to maintaining an active viewer base. 

Hope this helps!

Thanks Kevo! Your an awesome beytuber with all of your mods and 3D beys and I hope your channel keeps growing and gaining more views!

Respect to gigagaminggamer for his comment on @[Kevo]'s bX combo video.

I don't see the comment?

Sorry...I meant the one about whether or not beyblade was dying. Just kind of typed that post up quickly.

---

Hi! I've been on and off this site for a while now, but if you're new or just seeing this I hope you enjoy your stay on the WBO.

At some point, someone should take the spring out of Xtreme' or Hunter' and see what the golden springs are actually made of. My best guess would be Brass, but it would be cool to know exactly what it is, haha.

At some point, someone should take the spring out of Xtreme' or Hunter' and see what the golden springs are actually made of. My best guess would be Brass, but it would be cool to know exactly what it is, haha.

I don't think they would be brass , instead TT would have made 'thicker' springs and smaller ones too ( to improve burst resistance )

---

 THE   Beyblader   from   ODISHA 

Goodbye 18 grams border, Xcalius X3 is just ammmmeeeizinggg!!!
[Image: anf2bs.jpg]

---

Heavy-X3 combo:
7v
Xtreme

[Image: 21nmjip.jpg]

If i only had another bump, it would easily pass 49 grams.

[Image: i2uj3m.jpg]

[Image: 2w4mt6w.jpg]

Using the silver Wolborgs bearing for this recolour of Deep Chaos looks amazing!

---

My Cho-Z Reaper Deathscyther .12.Cr concept render, click below to see!

Spoiler (Click to View)

No I don't plan on doing more yet.

I should probably go back to making fan custom Zero G beyblade concepts again

Why do I think Xtend Plus would be another Zeta ??

---

 THE   Beyblader   from   ODISHA 

Why do I think Xtend Plus would be another Zeta ??

You can say so, they both will have 3 modes, so yeah, they will be similar in that way. But Zeta was outclassed by Trans, so the new Xtend should be better.

Why do I think Xtend Plus would be another Zeta ??

You can say so, they both will have 3 modes, so yeah, they will be similar in that way. But Xeta was outclassed by Trans, so the new Xtend should be better.

I don't think Xtend Plus would be sooo good compared to Trans ( Just my opinion )

---

 THE   Beyblader   from   ODISHA 

This for Some Members who Don't Have Beys, but still claim To have Beys.
One of them says, I have no burst beys. After 3 days he gets all the CHO z's.
Another Has a few beys, copies Other's collection, shows off, produce fake testing and other things.
He has no cHOz what he has dual layers only.


I think @[Suhasini] can understand to whom I am referring to, even @[FIREFIRE CPB]

---

This for Some Members who Don't Have Beys, but still claim To have Beys.
One of them says, I have no burst beys. After 3 days he gets all the CHO z's.
Another Has a few beys, copies Other's collection, shows off, produce fake testing and other things.
He has no cHOz what he has dual layers only.


I think @[Suhasini] can understand to whom I am referring to, even @[FIREFIRE CPB]

Yup,I know who you are talking about

---

Just a fellow Indian blader 
Check out my selling thread 
https://worldbeyblade.org/Thread-Selling...ing-thread
Also ,if you live in Delhi and will attend tournaments be ready to be CRUSHED
lol,enjoy??☝️

This for Some Members who Don't Have Beys, but still claim To have Beys.
One of them says, I have no burst beys. After 3 days he gets all the CHO z's.
Another Has a few beys, copies Other's collection, shows off, produce fake testing and other things.
He has no cHOz what he has dual layers only.


I think @[Suhasini] can understand to whom I am referring to, even @[FIREFIRE CPB]

Yup,I know who you are talking about

Also Those guys don't understand that there is no use of Misguiding others. 
Fake testings are the worst

---

This for Some Members who Don't Have Beys, but still claim To have Beys.
One of them says, I have no burst beys. After 3 days he gets all the CHO z's.
Another Has a few beys, copies Other's collection, shows off, produce fake testing and other things.
He has no cHOz what he has dual layers only.


I think @[Suhasini] can understand to whom I am referring to, even @[FIREFIRE CPB]

I can understand it , too 

---

 THE   Beyblader   from   ODISHA 

This for Some Members who Don't Have Beys, but still claim To have Beys.
One of them says, I have no burst beys. After 3 days he gets all the CHO z's.
Another Has a few beys, copies Other's collection, shows off, produce fake testing and other things.
He has no cHOz what he has dual layers only.


I think @[Suhasini] can understand to whom I am referring to, even @[FIREFIRE CPB]

I can understand it , too 

I am especially impressed with the WBO community on how welcoming it is.  Beys or no Beys, I think every Beyblade fan can feel welcome here.  Obviously, we don’t want to have made up test results.  It is bad enough that parts can have pretty dramatic variations that make testing an inexact and time consuming process.  Everyone here should try to help this community thrive.  And posting fair and accurate test results to the best of your ability is one way to help the community.  Remember if you love this hobby you should help to grow it.  I have had hobbies that died before.  It is sad to stare at a collection of stuff that you can’t use even if you want to.  Also, that collection will cease to have much value.

do we have some Hasbro non-SwitchStrike layers that are still not Outclassed? I heard Single Layer Roktavor is still kinda good,but I'm not so sure

do we have some Hasbro non-SwitchStrike layers that are still not Outclassed? I heard Single Layer Roktavor is still kinda good,but I'm not so sure

Hasbro J2 is good for stamina. It has strong slopes.

---

Highly Observant Hasbro Blader.

---