Another option is to post on Postimage.org. I find it a little more convenient, but for each their own.


I am maybe not getting you Jinbee and am getting more confused. So, according to what you say, the metal should be incorporated in the center of the layer right? My question is that if this is the case, would'nt it add a little too much pressure on the driver, playing with the balance of the beyblade? That weight could even lead to poor stamina? But maybe OWD discs will help? I am not sure.
So if I got you right, there are my questions, if I got you wrong, then I am open to explanations.

No no it doesn't have to be at the centre, it can be around the outer part of the layer. Like if you imagine Drain Fafnir, not every area of the outer part of the layer is rubber, like the dragon heads on it for example. You could also have the rubber and metal both outer the layer but have the rubber reach out further than the metal.

It's quite simple really.

Oh, now I get it! Thanks for the clarification, it sounds complicated but if you imagine it it's quite simple. Thanks a lot Jinbee!

I love how people misinterpret the "3" teeth when Maximum Garuda was the first Burst Bey to have less than 4 teeth.

---

LET IT RIP!!

wbba profile

My two beys Earth Eagle, Dark Libra, forever lost,

you'll always be the one that started my hobby

and the Beyblade Geeks rekindled it.

[Image: pdXOXLR.jpg]

I love how people misinterpret the "3" teeth when Maximum Garuda was the first Burst Bey to have less than 4 teeth.

Didn't Guardian Kerbeus come before Maximum Garuda and had 3 sets of teeth?

---

My Cho-Z Reaper Deathscyther .12.Cr concept render, click below to see!

Spoiler (Click to View)

No I don't plan on doing more yet.

I should probably go back to making fan custom Zero G beyblade concepts again

I love how people misinterpret the "3" teeth when Maximum Garuda was the first Burst Bey to have less than 4 teeth.

Didn't Guardian Kerbeus come before Maximum Garuda and had 3 sets of teeth?

Even though you could technically argue that Guardian Kerbeus didn't "come out" until it's 3-on-3 set a month after Maximum Garuda, Guardian Kerbeus was technically obtainable first in RLC 6, predating Maximum Garuda by about a month and a half. For all intents and purposes, Guardian Kerbeus is in fact the first layer with 3 or fewer teeth.

---

Cincinnati-based Organizer, and owner of every single currently released TT Burst bey part in at least one color. Hard to think of anything I don't have from MFB either...

wasn't valkyrie the first layer to have 3 sets of teeth

---

Just a blader out  of interest.

wasn't valkyrie the first layer to have 3 sets of teeth

I think so too...

wasn't valkyrie the first layer to have 3 sets of teeth

Technically it did, though it depends on if you count the elevated flat part as a tooth or not.

---

My Cho-Z Reaper Deathscyther .12.Cr concept render, click below to see!

Spoiler (Click to View)

No I don't plan on doing more yet.

I should probably go back to making fan custom Zero G beyblade concepts again

Can someone recommend a tri-wing screwdriver that works for Takara Dual Layers? I've already got a tri-wing screwdriver, but it's too small and can only be used for the screws used in the single/basic layers...

---

|| My YouTube Channel ||  Imagination is the Essence of Discovery || My Tumblr Account ||

Can someone recommend a tri-wing screwdriver that works for Takara Dual Layers? I've already got a tri-wing screwdriver, but it's too small and can only be used for the screws used in the single/basic layers...

Probably an unlicensed brand but there is a tri screw driver here that works really well for me, I can unscrew dual layers, single and god layers with ease.

[Image: 35n0bxz.jpg]

---

My Cho-Z Reaper Deathscyther .12.Cr concept render, click below to see!

Spoiler (Click to View)

No I don't plan on doing more yet.

I should probably go back to making fan custom Zero G beyblade concepts again

Can someone recommend a tri-wing screwdriver that works for Takara Dual Layers? I've already got a tri-wing screwdriver, but it's too small and can only be used for the screws used in the single/basic layers...

Probably an unlicensed brand but there is a tri screw driver here that works really well for me, I can unscrew dual layers, single and god layers with ease.

[Image: 35n0bxz.jpg]

Thanks, that helps a lot! Didn't even think about getting a set of bits instead of one screwdriver, haha.

---

|| My YouTube Channel ||  Imagination is the Essence of Discovery || My Tumblr Account ||

some of us know where you live

It's like, I wake up in the middle of the night and you're on my ceiling decked in black with night vision goggles. All of a sudden the light flickers and I'm surrounded by the comity and I'm just standing in my PJ's going "WTF?!"

Then I wake up and my Beyblade collection is gone.

We ought to have a web comic for stuff like this...

Would love to see this!

It's like, I wake up in the middle of the night and you're on my ceiling decked in black with night vision goggles. All of a sudden the light flickers and I'm surrounded by the comity and I'm just standing in my PJ's going "WTF?!"

Then I wake up and my Beyblade collection is gone.

We ought to have a web comic for stuff like this...

Would love to see this!

Its a 9 year old post. Plus the member has been banned.

Would love to see this!

Its a 9 year old post. Plus the member has been banned.

yea, but it was showing in the latest post section and with me being new to this forum I have no idea who is who.

Okay, is the rP beyblade owner's name Phai or Phi? I am seeing Phi everywhere now. So that's the correct spelling?

Okay, is the rP beyblade owner's name Phai or Phi? I am seeing Phi everywhere now. So that's  the correct spelling?

It's Phi

---

Okay, is the rP beyblade owner's name Phai or Phi? I am seeing Phi everywhere now. So that's  the correct spelling?

Spelled Phi, pronounced Fai. He seems to be named after the Greek letter for F.

---

CoroCoro August issues come out this month? The heck? Is July like a break time or something? Weird having both July and August come out in June.

---

[[ Michigan Blader | Avatar photo by Ivan Kislov ]]

Okay, is the rP beyblade owner's name Phai or Phi? I am seeing Phi everywhere now. So that's  the correct spelling?

The Japanese translation said 'Phai' but now that TakaraTomy has confirmed that it's 'Phi' on the site, we go with that.

I just found Orpheus O2 in my local Target. It... it's beautiful. Those gentle curves, those raised f-hole designs, the treble and bass clefs mirrored across the center, and even the circles near the top that look almost like the scroll. It all just says "violins" so hard, albeit a 5-stringed one (but hey, they DO exist)

As someone whose played the viola for most of my life, I can't help but love this design.

---

Cincinnati-based Organizer, and owner of every single currently released TT Burst bey part in at least one color. Hard to think of anything I don't have from MFB either...

I just found Orpheus O2 in my local Target. It... it's beautiful. Those gentle curves, those raised f-hole designs, the treble and bass clefs mirrored across the center, and even the circles near the top that look almost like the scroll. It all just says "violins" so hard, albeit a 5-stringed one (but hey, they DO exist)

As someone whose played the viola for most of my life, I can't help but love this design.

Does it have good slopes?

---

Hey there! My name is BuilderROB and I am an organizer who hosts tournaments in North Carolina.

Spoiler (Click to View)

Spoiler (Click to View)

I just found Orpheus O2 in my local Target. It... it's beautiful. Those gentle curves, those raised f-hole designs, the treble and bass clefs mirrored across the center, and even the circles near the top that look almost like the scroll. It all just says "violins" so hard, albeit a 5-stringed one (but hey, they DO exist)

As someone whose played the viola for most of my life, I can't help but love this design.

Does it have good slopes?

It feels like it has decent slopes, but the layer in general feels kind of lightweight too.

---

Cincinnati-based Organizer, and owner of every single currently released TT Burst bey part in at least one color. Hard to think of anything I don't have from MFB either...

https://goo.gl/forms/9QgHqFNd4wyedsCm1

---

-Zylohs

Think it's about time to make a weight limit in Burst?

Think it's about time to make a weight limit in Burst?

What exactly do you mean by that? Like, with WBO tournaments basically restricting combos after they reach a certain weight or something else?

---

My Stuff (Click to View)

MyAnimeList | Trakt | Current Burst Part List

Burst Testing Archives (By Blader) | Burst Testing Archives (By Layer)

Key For How I Format My Test Results
OS: Out-Spin | Burst: Burst | KO: Knock-Out | Odd/Even: Alternate Launches

Thanks and have a good one!