Beyblade Random Thoughts

(Feb. 26, 2016  4:26 PM)Kai-V Wrote:
(Feb. 26, 2016  11:22 AM)Zard Wrote: Hey, I was planning to buy a display to expose my rarest Beyblades. I had thought something like that (http://imgur.com/jEdbnDx) but I would not know where to find it, if you have any suggestions tell me. Grin

Oh, there are several that are on sale on eBay, for instance here: http://www.ebay.com/bhp/acrylic-display-box

Otherwise, if you are looking for real local stores, I do not know what exists in Roma, but try to find the sort of shop that specialises in artisanal art, that also sells frames, etc.

I finally chose a display box 27cmx17cm with 4 floors.
Thank you for the advice. Grin

(Feb. 26, 2016  4:32 PM)OkinawamTS Wrote: or you can look for the Amiibo Figure Display Box

(Feb. 26, 2016  4:26 PM)Kai-V Wrote:
(Feb. 26, 2016  11:22 AM)Zard Wrote: Hey, I was planning to buy a display to expose my rarest Beyblades. I had thought something like that (http://imgur.com/jEdbnDx) but I would not know where to find it, if you have any suggestions tell me. Grin

Oh, there are several that are on sale on eBay, for instance here: http://www.ebay.com/bhp/acrylic-display-box

Otherwise, if you are looking for real local stores, I do not know what exists in Roma, but try to find the sort of shop that specialises in artisanal art, that also sells frames, etc.

Thank you very much for the advice but I should buy at least 20 and would cost too much, it's a shame because the idea was pretty. Uncertain
(Feb. 28, 2016  2:26 AM)Zard Wrote:
(Feb. 26, 2016  4:26 PM)Kai-V Wrote:
(Feb. 26, 2016  11:22 AM)Zard Wrote: Hey, I was planning to buy a display to expose my rarest Beyblades. I had thought something like that (http://imgur.com/jEdbnDx) but I would not know where to find it, if you have any suggestions tell me. Grin

Oh, there are several that are on sale on eBay, for instance here: http://www.ebay.com/bhp/acrylic-display-box

Otherwise, if you are looking for real local stores, I do not know what exists in Roma, but try to find the sort of shop that specialises in artisanal art, that also sells frames, etc.

I finally chose a display box 27cmx17cm with 4 floors.
Thank you for the advice. Grin

(Feb. 26, 2016  4:32 PM)OkinawamTS Wrote: or you can look for the Amiibo Figure Display Box

(Feb. 26, 2016  4:26 PM)Kai-V Wrote: Oh, there are several that are on sale on eBay, for instance here: http://www.ebay.com/bhp/acrylic-display-box

Otherwise, if you are looking for real local stores, I do not know what exists in Roma, but try to find the sort of shop that specialises in artisanal art, that also sells frames, etc.

Thank you very much for the advice but I should buy at least 20 and would cost too much, it's a shame because the idea was pretty. Uncertain

This one is nice but a lot of money!
http://www.ebay.com/itm/United-Displaycr...Swv0tVKCNb
(Feb. 28, 2016  4:51 AM)Flame-Byxis Wrote: This one is nice but a lot of money!
http://www.ebay.com/itm/United-Displaycr...Swv0tVKCNb

Wow, when I saw the picture preview at first, I thought it was a bad idea to suggest that display case because it looked really cheaply made and drawn, with questionable materials, but then I saw the zoomed-in photographs and it turns out it is apparently official hah...
(Feb. 28, 2016  4:51 AM)Flame-Byxis Wrote:
(Feb. 28, 2016  2:26 AM)Zard Wrote:
(Feb. 26, 2016  4:26 PM)Kai-V Wrote: Oh, there are several that are on sale on eBay, for instance here: http://www.ebay.com/bhp/acrylic-display-box

Otherwise, if you are looking for real local stores, I do not know what exists in Roma, but try to find the sort of shop that specialises in artisanal art, that also sells frames, etc.

I finally chose a display box 27cmx17cm with 4 floors.
Thank you for the advice. Grin

(Feb. 26, 2016  4:32 PM)OkinawamTS Wrote: or you can look for the Amiibo Figure Display Box

Thank you very much for the advice but I should buy at least 20 and would cost too much, it's a shame because the idea was pretty. Uncertain

This one is nice but a lot of money!
http://www.ebay.com/itm/United-Displaycr...Swv0tVKCNb

it's nice but my girlfriend would drop me surely. xD
I had a dream that the Burst line is already available in my country, and I grabbed all that I could... Which is what I would probably do once it hits the local market, haha.
Omg yeah, I can't wait to actually be able to buy beys in a store. I have never really experienced ot to speak of. Gonna be so exciting!
I just got a new signature!
anyone noticed many Metal Fusion beys are misslabbled?

spoilt-spoiler (Click to View)
(Mar. 03, 2016  10:06 AM)FIREFIRE Wrote: anyone noticed many Metal Fusion beys are misslabbled?

spoilt-spoiler (Click to View)

They do this a lot even in burst Deathscyther is labelled as attack on its packaging. I shouldnt pay attention to any of it until its actually been physically tested
(Mar. 03, 2016  10:06 AM)FIREFIRE Wrote: anyone noticed many Metal Fusion beys are misslabbled?

spoilt-spoiler (Click to View)

Yes because it contains parts that theoretically would be suited for their type according to Takara Tomy, not us.
i've been using my burst beyblades for a while now, especially experimenting with attack types against odin heavy needle/claw/defense. i've realized one day i'm actually going to get hit in the eye, because the parts keep flying over the stadium barriers.
makes me wonder how are hasbro going to handle this issue
I would be very surprised if it actually hit you in the eye. That said, it probably wouldn't hurt as much as you expect. The Layers are very light and don't get knocked away with as much force as it seems.
IMO Xcalibur is the best in terms of flying.

#burstinbb10
there are times where i wish i could go back in time where i could buy all the plastic and HMS beyblade for super cheap.
today i when i opened my $120 cap strike g, this thought occurred to me again, never have i ever spent so much on a single beyblade.Crying
there are times i wonder why did the dragoon series beyblade tips, get made of harder rubber each generation (excluding hms).
(Mar. 03, 2016  10:23 PM)NEET no Kami Wrote: there are times where i wish i could go back in time where i could buy all the plastic and HMS beyblade for super cheap.
today i when i opened my $120 cap strike g, this thought occurred to me again, never have i ever spent so much on a single beyblade.Crying
there are times i wonder why did the dragoon series beyblade tips, get made of harder rubber each generation (excluding hms).
Don't we all, lol. I would be sitting on cases of Shining Gods and RB Act 5, if I had the foresight.

Cap G is a great bey though, I am falling more and more in love with that AR. It has a great hit power/recoil ratio imo.

I think they did this because of wear issues. It's hard to find a balance between the speed/softness of the tip and how fast it wears. Grip attacker and Dragoon S, imo, had the best rubber in the game, but they wore down extremely fast. I think they directly countered that with a heavily plastic-like rubber in Dragoon F, even though I guess that they said it was supposed to wear, to fit your stadium's curve (although I think that might have been just to curb complaints of wear). Then, they seemed to play around with the hardness with Dragoon V and V2, finally pretty much finding the happy medium in GT (too bad they made the tip so tiny). Then, when HMS came out, they seem to have tweaked it a bit more into what they pretty much still use today. I think RF and Xtreme are maybe a little harder than GFC and GFCU, but it's really close
FYI Dragoon V doesn't have a rubber tip.
(Mar. 04, 2016  12:14 AM)Zoroaste Wrote:
(Mar. 03, 2016  10:23 PM)NEET no Kami Wrote: there are times where i wish i could go back in time where i could buy all the plastic and HMS beyblade for super cheap.
today i when i opened my $120 cap strike g, this thought occurred to me again, never have i ever spent so much on a single beyblade.Crying
there are times i wonder why did the dragoon series beyblade tips, get made of harder rubber each generation (excluding hms).
Don't we all, lol. I would be sitting on cases of Shining Gods and RB Act 5, if I had the foresight.

Cap G is a great bey though, I am falling more and more in love with that AR. It has a great hit power/recoil ratio imo.

I think they did this because of wear issues. It's hard to find a balance between the speed/softness of the tip and how fast it wears. Grip attacker and Dragoon S, imo, had the best rubber in the game, but they wore down extremely fast. I think they directly countered that with a heavily plastic-like rubber in Dragoon F, even though I guess that they said it was supposed to wear, to fit your stadium's curve (although I think that might have been just to curb complaints of wear). Then, they seemed to play around with the hardness with Dragoon V and V2, finally pretty much finding the happy medium in GT (too bad they made the tip so tiny). Then, when HMS came out, they seem to have tweaked it a bit more into what they pretty much still use today. I think RF and Xtreme are maybe a little harder than GFC and GFCU, but it's really close
i'm waiting for my uriel 2 to arrive so i can use it's tip, because the recoil on neo cross horn, still has quite high recoil. never will beat my favourite AR for attack, cross griffon.
also i remember using the rubber from a mechanical pencil as a beyblade tip replacing RF.
probably will do the same once my grip flat core wears down.
Oh wow I just realised that these Burst parts have certain things to represent their layers as I saw on my KCD. Kerbeus having the heads to make a "K" and Centrals weird uneven surface on the outside makes a "C".
(Mar. 04, 2016  1:59 AM)J.I.N.B.E.E! Wrote: Oh wow I just realised that these Burst parts have certain things to represent their layers as I saw on my KCD. Kerbeus having the heads to make a "K" and Centrals weird uneven surface on the outside makes a "C".

Yes, Brad or someone else mentioned this in another thread.
(Mar. 04, 2016  2:00 AM)Kai-V Wrote:
(Mar. 04, 2016  1:59 AM)J.I.N.B.E.E! Wrote: Oh wow I just realised that these Burst parts have certain things to represent their layers as I saw on my KCD. Kerbeus having the heads to make a "K" and Centrals weird uneven surface on the outside makes a "C".

Yes, Brad or someone else mentioned this in another thread.

Yeah I just realised, it flew by me at the time.
Yeah, almost every layer's design is based on their respective first letter.

(For example, Odin have an oval shape and two circles, representing the O's, the yellow parts on Yggdrasil represent the top of the Y's, ect.)

To be honest, I wish Takara Tomy was focusing more on the performances rather than the look of the layers or the letter coding thing...
URGH. It's been quite a while since Burst started, and Indonesia still hasn't received even the first beys. I'm starting to run on the thread-thin line of patience. Anyone else with me?
(Mar. 06, 2016  3:14 PM)RDF3 Wrote: URGH. It's been quite a while since Burst started, and Indonesia still hasn't received even the first beys. I'm starting to run on the thread-thin line of patience. Anyone else with me?

if you're talking about burst. hasbro will release burst worldwide in 2017. no other country other then Japan has Burst in stores
Well, I do hope Burst gets internationally released, but unfortunately for you my country's beyblade distributor is Takara, not Hasbro (it's SE Asia)
It will assuredly come, do not worry. Indonesia has always been a big market for TAKARA-TOMY, there is no reason they would just skip you this time.