Beyblade Burst GT B-136 Beyblade Gatinko Battle Set

Includes-

2 Layer chips (Dragon & Valkyrie)
2 Layer Weight
4 Layer Bases (Slash, Rock, Ace & Gran)*
2 disks (Bl & St)
2 drivers (Pw & Ch)
2 launchers (blue & white)
2 long ripcord (black & red)

Official stock combos in the box are - Slash Valkyrie.Bl.Pw and Ace Dragon.St.Ch.

(Don't get me banned for piracy here, I never wanted to leak it in the first place but since there's some other Japanese guy who already got it leaked before any of my friends or even me, I thought it'd be nice to show it to all of you just in case.)

---

Look at the number of hexagons on the Gachi chips!

Valkyrie has 3 (barring the one in the middle), while Dragon has 2.

This definitely means a variation in the number of hexagons between different chips. I hope TT uses this to balance attack types by giving imbalanced chips (like the one on Valkyrie) a much greater weight.

@[Triumph] thank you for the images.

Okay so Ace Dragon looks really cool, and there seems to be three outer layered parts for it, what's that about? And St is the disk? Well it's about time double letters were used for disks too. Ch is probably Change if I had to speculate.

Valkyrie looks nice but admittedly it feels a bit too sameish now. Bl, again same at my thoughts about St. Pw, no doubt it will be Power.

---

My Cho-Z Reaper Deathscyther .12.Cr concept render, click below to see!

Spoiler (Click to View)

No I don't plan on doing more yet.

I should probably go back to making fan custom Zero G beyblade concepts again

@[Triumph] thank you for the images.

Okay so Ace Dragon looks really cool, and there seems to be three outer layered parts for it, what's that about? And St is the disk? Well it's about time double letters were used for disks too. Ch is probably Change if I had to speculate.

Valkyrie looks nice but admittedly it feels a bit too sameish now. Bl, again same at my thoughts about St. Pw, no doubt it will be Power.

I think Ch could either be Change or Charge.

---

Eh, I will think of something to put here...

... later ;)

I think dragon could be have "Change" since it's a balance bey and Valkyrie could have "Power." I see they will be naming the disks like drivers now. We will be getting different "Gachi" chips. I noticed that the defense core for dragon looks like Wyvern and the Stamina one looks like Garuda

---

My Youtube Channel: https://www.youtube.com/user/DarkandGothicStudios
(read "About" section)

Um guys I can't see the image.

---

Nevermind, these look sick! I just saw and oh boy are they cool

---

The new valkyrie looks like if CHo Z Valkyrie and God VAlkyrie fused. The Ace Dragon is lit! I may get this, or get them indivisually!

---

Champion! Javari Carr.

This is interesting... and also still nothing deconfirming B-133 will come with all three of Dragon's trademarked Layer Bases lol

Also, something interesting here, I think this leak also deconfirms the idea thats been going around for a while about Layer Weights only being useable on certain Layer Bases. On the box we can see these lines that have always indicated that parts can be exchanged between beys. They've been on every box with a bey in it since MFB or maybe even earlier. And on this one even though its cut off, we can clearly see that the Layer Weights' lines are connecting to all four Layer Bases.


If you want more proof, looking back at the RB15 leak, I'm 90% sure that Dragon's LW is being used on Slash and Valkyrie's LW is being used on Bushin. It could just be the low-res image of the RB15 box playing tricks with my eyes but the shapes of the Layer Weights are a very close match.

Spoiler (Click to View)

Speaking of Layer Weights, the initials for the ones in that set are on the box, they're the japanese characters after the driver initials. Can someone who knows japanese please post what the characters are and what they mean?

So either there is a little bit of metal now, with the layer weight, or the metal is the layer weight. Makes sense. I like that new Valkyrie! Also there are all three layers of dragon on the bottom left, or at least it looks like it. Maybe all three will be included?

I'm liking Dragon alot looks cool and valkyrie looks like a fuse between cho z valkyrie , victory valkyrie and  god valkyrie.

Anyone else notice the setting of the picture? It looks like it’s in a store. Probably doesn’t mean anything.

UPDATE - The driver for Ace Dragon is Ch 斩, yeah with that Japanese symbol.. It's really hard to notice that symbol down there lol. This makes the official stock combo  "Ace Dragon.St.Ch斩". I don't know what that symbol represents, like does it have some kind of special gimmick? No clue yet. I'll try gathering more information as soon as possible. Once again, I might not get anything from doing this or something but it'd really mean something nice to me if I let you guys know more about these up-coming  beyblades if it makes you happy. 

---

Charge cut?

---

I’m inclined to believe that symbol is the type of metal chip (the one between the plastic chip and wheel) used in the stock combo. Thank you for all the information @[Triumph], we definitely appreciate it.

---

૮(•ᴥ•)ა

Another thing to point out, Dragon isn't classified as a Balance type. The Ace Dragon combo is specified as an Attack type, meaning they're not classifying it as Balance even though it most likely has a Balance driver with Ch. They're only classifying it by whatever the Base's main type is, with Ace being an attack base.

---

LET IT RIP!!

wbba profile

My two beys Earth Eagle, Dark Libra, forever lost,

you'll always be the one that started my hobby

and the Beyblade Geeks rekindled it.

[Image: pdXOXLR.jpg]

I think Ch is charge possibly

---

And plus I think the symbol next to the drivers are engine gears

What if this "charge" can change like zeta from a zephyr tip to a assault and Xtreme

---

It can help u change like from barrage mode when it gives the bey an attack pattern like a rush lunch, speed mode when your bey will go super fast and a
....Idk maybe chase mode when he uses a more controlable pattern to chase down another bey

---

Just saying even if I wish that a driver like this would've been made

Do you have the name of the new main character ? His name is on the box ?

Like I said earlier, that's pretty much the one and only picture of the box with me right now. But I'm pretty sure his name is Dan or something like that. Why? Because Takara Tomy already confirmed in one of their earlier posts about Beyblade burst GT/Gachi that there's gonna be this new main character "Ban" (according to google translate lol so just replace the "b" with a "d" I guess??) with his Dragon beyblade. And also, I've also noticed that there's a Japanese symbol right next to Valkyrie's new "Pw" driver too. I don't know much about this mostly because this is something new what Takara Tomy is trying to do here and I've never seen them do like this (add a Japanese symbol next to the driver's names) especially when you look at their previous entry sets. Maybe there's gonna be some kind of old engine gear inside the driver which is why they possibly use this symbol in order to prevent confusion when it comes to old normal drivers?? That's just my guess but who knows? Anything could happen in this world, y'know!

I knew it

---

Beyblade Burst GT B-136 Beyblade Gatinko Battle Set

Includes-

2 Layer chips (Dragon & Valkyrie)
2 Layer Weight
4 Layer Bases (Slash, Rock, Ace & Gran)*
2 disks (Bl & St)
2 drivers (Pw & Ch)
2 launchers (blue & white)
2 long ripcord (black & red)

Official stock combos in the box are - Slash Valkyrie.Bl.Pw and Ace Dragon.St.Ch.

(Don't get me banned for piracy here, I never wanted to leak it in the first place but since there's some other Japanese guy who already got it leaked before any of my friends or even me, I thought it'd be nice to show it to all of you just in case.)

Great leak

---

Check out this story I made.
 -----> https://worldbeyblade.org/Thread-Beyblade-Burst-Ultra <----- Totally worth it!
0_0
 )  ) 

So every time we've seen a full GT Bey, the box abbreviation always goes like this:
[Layer Base] [Layer Chip].[Disc Initial].[Driver Initial] [Layer Weight Initial]
(eg; Ace Dragon.St.Ch 斩, Cosmo Valkyrie.11.Et 天)

The Layer Weight being at the end of the name falls into line with the way other parts like them have been notated. Metal Godchips and Level Chips on combos have been notated as "[combo] (MCG)" or "[combo] (Level Chip)" respectively, except the Layer Weights are mandatory parts and not optional bits like MGCs or LCs, so each Layer Weight is going to have a unique name and initial.

now that thats cleared up, hopefully all these misleading "new driver type is [layer weight initial] driver" posts wont happen anymore lol

Now I really have to wonder just how many types of layer weights there will be. We've seen 2 varieties here with 2 and 3 hexagons, but what about 4? What about 6? What about 1? What about if we get something with something other than hexagons? There's a bit of possibility here if they grasp it. Even then I feel like the heaviest balanced layer weight is gonna be the one that eventually falls into favor.

It brings into question what parts will be limited in the deck finals though. I can see limiting layer bases and layer chips to avoid duplicates, but that doesn't quite work with only 2 known types of layer weight. We'd need a 3rd kind of layer weight to make that work out.

---

Cincinnati-based Organizer, and owner of every single currently released TT Burst bey part in at least one color. Hard to think of anything I don't have from MFB either...

I'm most likely gonna use the Ace Dragon weight it comes with. The valkyrie one is giving me MAJOR ocd I cant look at it

Now I really have to wonder just how many types of layer weights there will be. We've seen 2 varieties here with 2 and 3 hexagons, but what about 4? What about 6? What about 1? What about if we get something with something other than hexagons? There's a bit of possibility here if they grasp it. Even then I feel like the heaviest balanced layer weight is gonna be the one that eventually falls into favor.

It brings into question what parts will be limited in the deck finals though. I can see limiting layer bases and layer chips to avoid duplicates, but that doesn't quite work with only 2 known types of layer weight. We'd need a 3rd kind of layer weight to make that work out.

We have seen a third, its the 天 LW thats on Cosmo Valkyrie (which appears 4-studded btw). I think its possible that 天 will come with Bushin Asura, since 天 is not advertised as new on the RB15 box, and neither Ace Dragon nor Slash Valkyrie come with it. So I don't think there will need to worry about deck format, the usual "don't repeat parts" ruling should apply to the GT Layers just like it does everywhere else.

Now I really have to wonder just how many types of layer weights there will be. We've seen 2 varieties here with 2 and 3 hexagons, but what about 4? What about 6? What about 1? What about if we get something with something other than hexagons? There's a bit of possibility here if they grasp it. Even then I feel like the heaviest balanced layer weight is gonna be the one that eventually falls into favor.

It brings into question what parts will be limited in the deck finals though. I can see limiting layer bases and layer chips to avoid duplicates, but that doesn't quite work with only 2 known types of layer weight. We'd need a 3rd kind of layer weight to make that work out.

I'm pretty sure the one layer weight which comes with Cosmo Valkyrie has four hexagons.. I might be wrong too!

---

Now I really have to wonder just how many types of layer weights there will be. We've seen 2 varieties here with 2 and 3 hexagons, but what about 4? What about 6? What about 1? What about if we get something with something other than hexagons? There's a bit of possibility here if they grasp it. Even then I feel like the heaviest balanced layer weight is gonna be the one that eventually falls into favor.

It brings into question what parts will be limited in the deck finals though. I can see limiting layer bases and layer chips to avoid duplicates, but that doesn't quite work with only 2 known types of layer weight. We'd need a 3rd kind of layer weight to make that work out.

We have seen a third, its the 天 LW thats on Cosmo Valkyrie (which appears 4-studded btw). I think its possible that 天 will come with Bushin Asura, since 天 is not advertised as new on the RB15 box, and neither Ace Dragon nor Slash Valkyrie come with it. So I don't think there will need to worry about deck format, the usual "don't repeat parts" ruling should apply to the GT Layers just like it does everywhere else.

I wasn't aware of that 4-studded one existing, probably because I haven't taken a look back at that random booster in a while or thought about that. Still thinking that this 4-stud one is the go-to right now just on principle of likely being heavier than the 2-studded one (which is the one we got from Driger Fang) and the 3 studded one (which is also probably gonna be off-balance).

Now we just wait for Hades' successor so we can get our 6-studded Hexaweight layer weight and rule over all the others.

---

Cincinnati-based Organizer, and owner of every single currently released TT Burst bey part in at least one color. Hard to think of anything I don't have from MFB either...

We have seen a third, its the 天 LW thats on Cosmo Valkyrie (which appears 4-studded btw). I think its possible that 天 will come with Bushin Asura, since 天 is not advertised as new on the RB15 box, and neither Ace Dragon nor Slash Valkyrie come with it. So I don't think there will need to worry about deck format, the usual "don't repeat parts" ruling should apply to the GT Layers just like it does everywhere else.

I wasn't aware of that 4-studded one existing, probably because I haven't taken a look back at that random booster in a while or thought about that. Still thinking that this 4-stud one is the go-to right now just on principle of likely being heavier than the 2-studded one (which is the one we got from Driger Fang) and the 3 studded one (which is also probably gonna be off-balance).

Now we just wait for Hades' successor so we can get our 6-studded Hexaweight layer weight and rule over all the others.

I think that Slash Asura from the Random Booster has the Layer Weight with 6 studs, but I might be wrong.

I'm looking at the Grand wheel at the bottom and I think Grand Valkyrie will be very overpowered since it's basically a garuda base.