Hey bro are u still available??? I'll like to request a 3d printed bey

---

I have a whole concept too if u would like to see

Hey bro are u still available??? I'll like to request a 3d printed bey

---

I have a whole concept too if u would like to see

He's either on vacation or getting ready for it. You might have to wait for a little while.

---

Player and Organizer for NC Beyblade | Use code "HASHTAGFAFNIR" for 8% off on BeysAndBricks!

Hey bro are u still available??? I'll like to request a 3d printed bey

---

I have a whole concept too if u would like to see

He's either on vacation or getting ready for it. You might have to wait for a little while.

---

Thanks dude

Are spring loaded parts possible? Also Happy New Years Eve!!

---

"Do you want to live in this boring reality, or do you want to change it with me?"

- Yuuta Togashi aka Dark Flame Master from Chuunibyou episode 12

here's my list of questions don't mean to give you a hard time i just want to know all the details
1. how many gimmick's can a bey have.
2. if you want a complete bey which means driver,metal piece,and layer does that mean you can't have a frame.
3. can my bey have dual rotation
4. do you print the beys
5. do you pay for shipping
6. how long would it take to send to chicago
7. how will i know that you are not conning me out of my adress email my money
8. am i allowed to pay after i receive the product
9. can you add the unburstable gimmick to beys like the ones on cho z valkyrie
10.can i have a bey that slopes down like dead hades
also HAPPY NEW YEARS!!!!!!

Happy new years eve everyone.

---

here's my list of questions don't mean to give you a hard time i just want to know all the details
1. how many gimmick's can a bey have.
2. if you want a complete bey which means driver,metal piece,and layer does that mean you can't have a frame.
3. can my bey have dual rotation
4. do you print the beys
5. do you pay for shipping
6. how long would it take to send to Chicago
7. how will i know that you are not conning me out of my address email my money
8. am i allowed to pay after i receive the product
also HAPPY NEW YEARS!!!!!

1.  A bey can have multiple.  "+0.50 USD per Gimmick" is in his primary post

2  Correct he has stated he doesn't do frames.

3?

4  He does print the beys off.

5  hasn't been mentioned but considering he prints it off probably.
 
6.?

7. He has already showed the models plus withing 1-2 months one or two will receive the Bey they commissioned if you have little trust and want proof from them.

8. No as how do we know you're not conning him of his money.

happy new year

---

omega2663 nice!

Happy new years eve everyone.

---

here's my list of questions don't mean to give you a hard time i just want to know all the details
1. how many gimmick's can a bey have.
2. if you want a complete bey which means driver,metal piece,and layer does that mean you can't have a frame.
3. can my bey have dual rotation
4. do you print the beys
5. do you pay for shipping
6. how long would it take to send to Chicago
7. how will i know that you are not conning me out of my address email my money
8. am i allowed to pay after i receive the product
9. can you add burst stoppers to beys like the ones on cho-z valkyrie
10. can i have a bey that slopes down like dead hades
also HAPPY NEW YEARS!!!!!

1.  A bey can have multiple.  "+0.50 USD per Gimmick" is in his primary post

2  Correct he has stated he doesn't do frames.

3?

4  He does print the beys off.

5  hasn't been mentioned but considering he prints it off probably.
 
6.?

7. He has already showed the models plus withing 1-2 months one or two will receive the Bey they commissioned if you have little trust and want proof from them.

8. No as how do we know you're not conning him of his money.

i thank you for trying to help i really do but i would prefer BURST3DPRINTER to reply for himself please im not trying to be rude i would just prefer the creator to confirm these questions himself.

Happy New Year! The WBO has had a great year!

---

Hi! I’m the Charged Diamond, a YouTuber! I hope to get my own custom Beyblade in the future. If you want to get some concept art for a Beyblade you want to design, just look at one of my threads. You may see me in future tournaments, but I’m not participating in any at the time. Please subscribe to me on YouTube, and have a good day! :)

Hi! I hope you enjoyed your vacation!

---

Hi! I’m the Charged Diamond, a YouTuber! I hope to get my own custom Beyblade in the future. If you want to get some concept art for a Beyblade you want to design, just look at one of my threads. You may see me in future tournaments, but I’m not participating in any at the time. Please subscribe to me on YouTube, and have a good day! :)

Hi! I hope you enjoyed your vacation!

He might still be on vacation till 10th February.

Hi! I hope you enjoyed your vacation!

He might still be on vacation till 10th February.

Burst3DPrinter’s back from vacation, but sadly his 3D Printer broke, so we’ll have to wait until February 11th for the 3D Printer to be fixed, so you’re partly right.

---

Sorry to hear about the 3D Printer, Burst3DPrinter! ;( I hope you enjoyed your vacation nevertheless.

---

Hi! I’m the Charged Diamond, a YouTuber! I hope to get my own custom Beyblade in the future. If you want to get some concept art for a Beyblade you want to design, just look at one of my threads. You may see me in future tournaments, but I’m not participating in any at the time. Please subscribe to me on YouTube, and have a good day! :)

Was mine finished

How do I submit my bey design? Also, are spring loaded parts possible?

---

"Do you want to live in this boring reality, or do you want to change it with me?"

- Yuuta Togashi aka Dark Flame Master from Chuunibyou episode 12

Hi, Burst3DPrinter, I heard that your printer was broken, so sorry to hear that. How did your vacation when, I hope you had a good one, but I have a question though. How are you organizing the commissions that you get? I'm just curious since I currently in a program coding class at my school and the class was assigned work relating to using Microsoft Access, which is used for creating databases to store data in in case you didn't know.

Damn this thread is ded

Damn this thread is dead

Not dead I'd say. Until request spots are free people won't bother commenting unless they have a query on the service.

Damn this thread is dead

Not dead I'd say. Until request spots are free people won't bother commenting unless they have a query on the service.

You're right about the thread being not dead. Burst3DPrinter just can't accept commissions or print custom bey parts because his 3D printer is broken and he won't be able to work until the 11th of this month.

To make a thread you have to touch the topic button and then it will appear a button we're says make a thread

I’m sorry for asking so many questions, but where is the topic button?

Edit: I just found out how to post a thread. Thank you!

How do you do it?

just 4 more days until his printer is fixed

is my design finished?

Hi I have a beyblade design for you
https://photos.google.com/u/1/photo/AF1Q...h5DxrKuIb5
Can you print this?
Beyblade name : Raging Godzilla
Bitbeast:An ancient Montrous beast
Colour:Black for the body and blue for the eyes,the laser that he is shooting,the the upper blade's upper part and the middle orb chip
Spin rotation:right
Metal part:the claw and the spikes
Gimmick :The less stamina the stronger it attacks
Bey Type:Attack

The bey is a Cho z beyblade. I drew it myself?
And can you ship it to penang... I live in a different country ?

Are you still available

Hi I have a beyblade design for you
https://photos.google.com/u/1/photo/AF1Q...h5DxrKuIb5
Can you print this?
Beyblade name :Godzilla
Bitbeast:An ancient Montrous Monster
Colour:Black for the body and blue for the eyes and the laser that he shoots
Spin rotation:right
Metal part:the claw and the spikes
Gimmick :The less stamina the stronger it attacks
Bey Type:Attack

The bey is a Cho z beyblade. I drew it myself?
And can you send it to penang... I live in a different country ?

Are you still available

You will both have to wait until @[Burst3DPrinter] gets his printer fixed on February 11th.

---

Player and Organizer for NC Beyblade | Use code "HASHTAGFAFNIR" for 8% off on BeysAndBricks!

Hi I have a beyblade design for you
https://photos.google.com/u/1/photo/AF1Q...h5DxrKuIb5
Can you print this?
Beyblade name :Godzilla
Bitbeast:An ancient Montrous Monster
Colour:Black for the body and blue for the eyes and the laser that he shoots
Spin rotation:right
Metal part:the claw and the spikes
Gimmick :The less stamina the stronger it attacks
Bey Type:Attack

The bey is a Cho z beyblade. I drew it myself?
And can you send it to penang... I live in a different country ?

Are you still available

You will both have to wait until @[Burst3DPrinter] gets his printer fixed on February 11th.

Oh OK thanks for telling me that

---

Umm how do I pay?