CZ-1 and CZ-2 are the new identification numbers after B.

like how Mfb went from BB to BBG, or Og went from A to MS.

---

Balro gang 

CZ-1 and CZ-2 are the new identification numbers after B.

like how Mfb went from BB to BBG, or Og went from A to MS.

Why would they make new identification numbers in the middle of a system that still uses the "B-___" product number?

---

My Cho-Z Reaper Deathscyther .12.Cr concept render, click below to see!

Spoiler (Click to View)

No I don't plan on doing more yet.

I should probably go back to making fan custom Zero G beyblade concepts again

I'm thinking those are just codenames, like how Revive Phoenix was "July New".

September 2018: Turn F2 (Cho-Z Fafnir)
October 2018: Heavy (Balance type)
November 2018: CZ-1, CZ-2, Turn E
December 2018: CZ-3, Turn K

Where is this page from? Is it the new guide book or a CoroCoro? Or something else? Do you know, anyway?

Whose tweet is it?

---

[[ Michigan Blader | Avatar photo by Ivan Kislov ]]

Definitely codenames. Let's not get ourselves too confused over Takara-Tomy's hidden naming decisions, haha.

---

Hoshi-no-Yume FS | Wiki Profile | Twitter | Burst Collection | Osu! | MyAnimeList

Add me on your Switch!
3008-5546-8702

I feel sw could be either sword,swing,swift,swag,sworn.swap and ..........................




I’out

---

Just a fellow Indian blader 
Check out my selling thread 
https://worldbeyblade.org/Thread-Selling...ing-thread
Also ,if you live in Delhi and will attend tournaments be ready to be CRUSHED
lol,enjoy??☝️

Turn K is Hazard Kerbeus' true combo. It isn't that hard to identify by the silhouette

---

CZ-2's silhouette is of Jail Jormungand

---

The bey that looks to be one of the new amaterios beys has the 0 disc and a driver that has the greek letter Lambda, which is the equivalent of an L

---

CZ-1 might have Inferno Ifrit's silhouette, but it's hard to make out. Turn E seems to be an Epic Evileye silhouette, so I guess that the Beys that weren't in the anime will get represented in some way (Fenrir is replace by Vise Leopard)

---

I feel sw could be either sword,swing,swift,swag,sworn.swap and ..........................




I’out

I think Swing is correct, but I just noticed that Buster Xcalibur is going to have the 1 disc. Not very original :P

I'm not sure we can bet on silhouettes. Revive Phoenix seemed to use a Tornado Wyvern silhouette in its "July New" reveal originally, and we know those two look nothing alike now.

---

[[ Michigan Blader | Avatar photo by Ivan Kislov ]]

I'm not sure we can bet on silhouettes. Revive Phoenix seemed to use a Tornado Wyvern silhouette in its "July New" reveal originally, and we know those two look nothing alike now.

I know, but that instance revealed the typing of Phoenix to be Defense. Plus, I have a theory that all of the ones that say "Turn __" are evolutions or just based on the silhouette Bey, while the "CZ-__ " ones are completely original. For example, Vise Leopard was likely known as "Turn F" secretly to show its resemblance to Fang Fenrir.

I'm not sure we can bet on silhouettes. Revive Phoenix seemed to use a Tornado Wyvern silhouette in its "July New" reveal originally, and we know those two look nothing alike now.

I know, but that instance revealed the typing of Phoenix to be Defense. Plus, I have a theory that all of the ones that say "Turn __" are evolutions or just based on the silhouette Bey, while the "CZ-__ " ones are completely original. For example, Vise Leopard was likely known as "Turn F" secretly to show its resemblance to Fang Fenrir.

Im sorry, but that makes absolutely no sense. We cannot use silhouettes as information. As Frostic Fox said earlier, Revive Phoenix used a Tornado Wyvern silhouette. Just because they were the same type doesn’t mean anything. It was most likely a coincidence. We need to wait for more information before making theories imo.

Buster Xcalibur is just a Booster-Level Starter, that everything of it, except its releasing format, is the same as other boosters, instead of starters.

---

CZ-1 and CZ-2 are the new identification numbers after B.

like how Mfb went from BB to BBG, or Og went from A to MS.

Why would they make new identification numbers in the middle of a system that still uses the "B-___" product number?

They did it in the middle of the HMS system, actually. I wouldn't be surprised if CZ-1 Is still ChoZetsu.

---

Balro gang 

My brother is asking if and when the entire Beyblade for Hazard Kerbeus will be released (layer + disc + tip instead of just the layer from the random pack).

My brother is asking if and when the entire Beyblade for Hazard Kerbeus will be released (layer + disc + tip instead of just the layer from the random pack).

Unknown. There's no guarantee that it will happen.

Guardian Kerbeus was a random layer first, for May 2017, and then it was in the 3-on-3 set in August 2017. The next Triple Booster Set will be out this August. If it's a repeat, it may be there.

But that is no guarantee.

---

[[ Michigan Blader | Avatar photo by Ivan Kislov ]]

My brother is asking if and when the entire Beyblade for Hazard Kerbeus will be released (layer + disc + tip instead of just the layer from the random pack).

Unknown. There's no guarantee that it will happen.

Guardian Kerbeus was a random layer first, for May 2017, and then it was in the 3-on-3 set in August 2017. The next Triple Booster Set will be out this August. If it's a repeat, it may be there.

But that is no guarantee.

Thanks.

Unknown. There's no guarantee that it will happen.

Guardian Kerbeus was a random layer first, for May 2017, and then it was in the 3-on-3 set in August 2017. The next Triple Booster Set will be out this August. If it's a repeat, it may be there.

But that is no guarantee.

Thanks.

If you go by the shadows on the page, it looks like the full combo will be out in December. Regardless, Revive Phoenix was supposed to have another combo entirely, but got cancelled, so we'll have to wait and see if that's the case.

Regardless, Revive Phoenix was supposed to have another combo entirely, but got cancelled

Was there ever proof of this? I just remember a Chinese(?) chat convo that was posted. Similar happened regarding L2 and sX in RBV10 being improved molds, but that didn't seem to come to pass as far as anyone seems to be aware.

Or maybe you're talking about something different.

---

[[ Michigan Blader | Avatar photo by Ivan Kislov ]]

Regardless, Revive Phoenix was supposed to have another combo entirely, but got cancelled

Was there ever proof of this? I just remember a Chinese(?) chat convo that was posted. Similar happened regarding L2 and sX in RBV10 being improved molds, but that didn't seem to come to pass as far as anyone seems to be aware.

Or maybe you're talking about something different.

it was supposed to be rP 16 and something else, but the leaker guy said that the project for that combo was cancelled

Was there ever proof of this? I just remember a Chinese(?) chat convo that was posted. Similar happened regarding L2 and sX in RBV10 being improved molds, but that didn't seem to come to pass as far as anyone seems to be aware.

Or maybe you're talking about something different.

it was supposed to be rP 16 and something else, but the leaker guy said that the project for that combo was cancelled

I remember reading the same thing way back. Too sleepy to look it up right now, but I know it's either in this thread or in the rP thread somewhere.

---

Cincinnati-based Organizer, and owner of every single currently released TT Burst bey part in at least one color. Hard to think of anything I don't have from MFB either...

I found it. Yes, it's the same chattery that claimed sX and L2 were improved in RBV10. Maybe I don't know the backstory behind this leaker, but I am rather skeptical of how legit they actually are.

I think that's traditional Chinese writing, which means it may be someone from Taiwan or Hong Kong. The person could be someone who works at a factory on some level, if they're legit. They would have access to plans and the beys early, after all.

See (Click to View)

---

[[ Michigan Blader | Avatar photo by Ivan Kislov ]]

Regardless, Revive Phoenix was supposed to have another combo entirely, but got cancelled

Was there ever proof of this? I just remember a Chinese(?) chat convo that was posted. Similar happened regarding L2 and sX in RBV10 being improved molds, but that didn't seem to come to pass as far as anyone seems to be aware.

Or maybe you're talking about something different.

I'm talking about that chat that had Revive Phoenix with the 16 disc and, I think a Ur. driver that was said to be cancelled, but then questioned whether or not Tevive Phoenix was completely cancelled

I'm talking about that chat that had Revive Phoenix with the 16 disc and, I think a Ur. driver that was said to be cancelled, but then questioned whether or not Tevive Phoenix was completely cancelled

Yeah, I put it in my post above yours. It's in a spoiler tag because the images are so big.

I'm skeptical of the legitness of the sources, but it's not impossible that a Chinese-speaking person may have access to details. The parts aren't made in Japan, after all.

So not sure I believe it, but I can see how it could be legit.

---

[[ Michigan Blader | Avatar photo by Ivan Kislov ]]

Wait, could the driver of Shadow αmaterios actually be λ instead of X? Its shape looks a little bit strange to be an X. (You can compare it with the X in the name of zA.)
Do we have any trademark start with L? If the driver here is really λ, that could be a new prize beyblade for the Rare Bey Get Bettle on official website, like αmaterios, βaldur and Ωrichalcum, and it might be λ!

---

I found it. Yes, it's the same chattery that claimed sX and L2 were improved in RBV10. Maybe I don't know the backstory behind this leaker, but I am rather skeptical of how legit they actually are.

I think that's traditional Chinese writing, which means it may be someone from Taiwan or Hong Kong. The person could be someone who works at a factory on some level, if they're legit. They would have access to plans and the beys early, after all.

See (Click to View)

He said "let me check" so they are kind of official...

He said "let me check" so they are kind of official...

Maybe, maybe not. Anyone can say that or just put that in. I think if we had a better idea of the source, it would be easier to figure out how trusting to be. Otherwise, it could be made by anybody.

I could make up a fake text conversation with hit-and-miss advice just like that. I mean, they said sX and L2 would be improved, which has failed to be proven correct. They're saying a certain setup of a bey was canceled, but there's no way we can verify that if there's absolutely no other source. You have to be able to trust them.

It's like a psychic. They just have to tell you something that seems true enough for you to buy it. I mean, look, they seem to be wrong about the sX and L2 molds, but people are overlooking that. We knew about Wedge before they posted it. nL.Ds weighs about 44.1 grams while bL.13.Jl weighs about 45.9 from what info I can find, which is only about 2 grams of difference, not 5 or 6 like they said. We saw Jolt's performance in the official video shortly before.

The only verifiably correct things they've said so far were about the drivers, which we had information to prior. So I'm skeptical.

---

[[ Michigan Blader | Avatar photo by Ivan Kislov ]]

Well...I am not very sure, but I should have clarified that the information was not confirmed when I post the two pics...
So that conversation was between a friend of mine and his friend. He post that pics in a chat group. Other members and I have asked him several times but he never told us who that guy really is...What the only thing we know is that, for everytime there are big disagreement in the group, he would ask this "friend". We guess that this "friend" might be a staff in TT or other companies have corperation with TT, but is definetely not someone directly work on Beyblade projects.
So, that's just some grapevine things, and it is not wise to totally believe it.

---