Photo Gallery

(Aug. 24, 2012  11:24 PM)Balance Blader Wrote:

Omg. Mindblown.

Amazing picture broo.
(Aug. 24, 2012  10:53 PM)UltimateFantasy Wrote: Hmm, what were the parts used for Vulpace, it seems interesting...
While it was never made, the parts Dio used are:
AR: Triple Tiger
WD: Wide Attack (I think)
SG: Neo Right SG (not sure what the core is)
SP: Survivor Ring
BB: Customize Grip Base
Tip: SG Grip Base

(Aug. 24, 2012  11:24 PM)Balance Blader Wrote:

Ahahah, using a Thunder Pegasus, collectors shall weep Grin
(Aug. 24, 2012  11:24 PM)Balance Blader Wrote:

AWESOME!!!!! One of the reasons I want a Torch/Flame Pegasus SO badly!!!!!!
Btw, where did you get the Thunder Pegasus? I remember DaWRETCHEDONE had a Thunder Pegasus on ebay for a ridiculous price.
(Aug. 24, 2012  11:26 PM)th!nk Wrote:
(Aug. 24, 2012  10:53 PM)UltimateFantasy Wrote: Hmm, what were the parts used for Vulpace, it seems interesting...
While it was never made, the parts Dio used are:
AR: Triple Tiger
WD: Wide Attack (At least, I think that's what it is)
SG: Neo Right SG (not sure what the core is)
SP: Survivor Ring
BB: Customize Grip Base
Tip: SG Grip Base

(Aug. 24, 2012  11:24 PM)Balance Blader Wrote:

Ahahah, using a Thunder Pegasus, collectors shall weep Grin

Thanks, Th!nk. I was a bit shocked that he used a Thunder Pegasus instead of putting the bit chip on another bey and putting Flame Pegasus on top. Oh well, a cool part from the anime that was made into real life.
I was just randomly testing out my camera to capture details, and this was the result lol:

(Aug. 24, 2012  10:47 PM)th!nk Wrote:
(Aug. 01, 2012  12:04 PM)dio Wrote: hi everyone, no new photos here for long time.
here is my moot.

anyway, here is my new work.
the beys is a boss in the GBA game, but it only have the design of the bit beast...
so i design the whole bey for it.
here is a special stickers driger g, i love the stickers of it.

Ahh, Vulpace (or is it Ulpace, who knows), one of my favorite bit chips. Messed mine up slightly when clear coating it, had some of the image come off and shift around, but I have a plan to reproduce it with the metallic background and all, once I find a suitable backing for it. Awesome work on the custom, too.

And the White Tiger Ver. Stickers on the driger G are lovely, I've applied a set of those myself, I didn't expect them to look so good, but they suit driger g really well, though I need to reglue some parts because they've become a little loose.
it's possible printing the ulpace bit beast on stickers wif metallic silver coating
but that is probably pricey since I saw that kinda paper is available
having the same cost wif the regular white background one.
it should be expensive if u buy a pack of stickers and u solely print a bit beast....

(Aug. 25, 2012  2:47 AM)roux Wrote:
(Aug. 24, 2012  10:47 PM)th!nk Wrote:
(Aug. 01, 2012  12:04 PM)dio Wrote: hi everyone, no new photos here for long time.
here is my moot.

anyway, here is my new work.
the beys is a boss in the GBA game, but it only have the design of the bit beast...
so i design the whole bey for it.
here is a special stickers driger g, i love the stickers of it.

Ahh, Vulpace (or is it Ulpace, who knows), one of my favorite bit chips. Messed mine up slightly when clear coating it, had some of the image come off and shift around, but I have a plan to reproduce it with the metallic background and all, once I find a suitable backing for it. Awesome work on the custom, too.

And the White Tiger Ver. Stickers on the driger G are lovely, I've applied a set of those myself, I didn't expect them to look so good, but they suit driger g really well, though I need to reglue some parts because they've become a little loose.
it's possible printing the ulpace bit beast on stickers wif metallic silver coating
but that is probably pricey since I saw that kinda paper is available
having the same cost wif the regular white background one.
it should be expensive if u buy a pack of stickers and u solely print a bit beast....

I still have some clear and opaque sticker paper from when I was into lego figure customization, and hopefully one of the opaque ones is glossy. That said, I have a few stickers to print, and I can always just print in one corner, cut it out, and then reuse the sheet at a later date.
The metallic backing is the primary concern but I haven't looked into it. Now I look at it, my vulpace/ulpace sticker is in better condition than I remembered, so it's not a major priority just yet.
(Aug. 25, 2012  2:52 AM)th!nk Wrote:
(Aug. 25, 2012  2:47 AM)roux Wrote:
(Aug. 24, 2012  10:47 PM)th!nk Wrote: Ahh, Vulpace (or is it Ulpace, who knows), one of my favorite bit chips. Messed mine up slightly when clear coating it, had some of the image come off and shift around, but I have a plan to reproduce it with the metallic background and all, once I find a suitable backing for it. Awesome work on the custom, too.

And the White Tiger Ver. Stickers on the driger G are lovely, I've applied a set of those myself, I didn't expect them to look so good, but they suit driger g really well, though I need to reglue some parts because they've become a little loose.
it's possible printing the ulpace bit beast on stickers wif metallic silver coating
but that is probably pricey since I saw that kinda paper is available
having the same cost wif the regular white background one.
it should be expensive if u buy a pack of stickers and u solely print a bit beast....

I still have some clear and opaque sticker paper from when I was into lego figure customization, and hopefully one of the opaque ones is glossy. That said, I have a few stickers to print, and I can always just print in one corner, cut it out, and then reuse the sheet at a later date.
The metallic backing is the primary concern but I haven't looked into it. Now I look at it, my vulpace/ulpace sticker is in better condition than I remembered, so it's not a major priority just yet.
oh u do customize Lego torso and faces?
I've seen many on eBay but dun hv plans to make any

I guess metallic backing is still the first choice of printing ulpace
so I'll look forward to ur work if u do so

off topic a bit: I begin collectingLego minifigures since this month
Today I bought a Driger V2 from a friend of mine for 17$.Here are some pics of it!
Good price, and the second mold too (i.e. less breakage issues). Nice score. What's the condition of the tip like?
(Aug. 25, 2012  11:36 AM)th!nk Wrote: Good price, and the second mold too (i.e. less breakage issues). Nice score. What's the condition of the tip like?
It's in a good condition...It took me a lot of time to figure out how to keep those two things on the blade base.
I thought the Zero-G RBv2 Gryph sticker looks good like this so i made.
I have alot of spare parts so Im thinking of doing alot of things like this.And also I would be selling most of my beys in a year becuase i will be going back to Canada.
I got those stickers! It screams USA! to me, for some reason.
The mail delivers earlier here than I thought...
Man, do I love the clear Attack Stadium. The new BeyLaunchers helps a bit, and who doesn't love a new RF Tongue_out
I guess this has been done before, but I wanted to do one myself =)

I've been having trouble getting my hands on a left spin launcher for my plastic beys, and noticed my HMS launcher, has a left and right spin on it. So I decided to merge the two. Sabotaging the beyblade holder from a plastic launcher, and attatching it to the HMS. TA DA left spin plastic ^^.
(I've also always prefered the feel of launching from the HMS)

I also want to mix a string launcher and plastic together when I can get my hands on one, cus then I can launch plastics with the angle compass and everything else.

(I figured since this is a picture, it would be okay in the picture gallery thread)
That would be more of a Your Creations thing (Illegal Mods to your beyblade parts, there was a thread on Beyblade modding iirc), but nicely done! Yeah, many people have done it in the past, and since HMS launchers are like bliss in a launch they tend to be the base for many types of beyblade prongs.

Nicely done anyway, looking forward to the extra stuff you want to add.
Received these sticker sheets from roux, now just need the materials to cut these and it'll be awesome. Smile

(Aug. 28, 2012  5:26 PM)zionson Wrote: Apparently, plastics are quite nice. I dub this one

GHOST SPIRAL DRAGON

Awesome as usual zionson

(Aug. 28, 2012  5:26 PM)zionson Wrote: Apparently, plastics are quite nice. I dub this one

GHOST SPIRAL DRAGON

mother of god....how did you get that? its beautiful
I just got my new babies I've been waiting for!! =D

(Big picture below)
(Aug. 29, 2012  5:39 PM)Olencia Wrote: I just got my new babies I've been waiting for!! =D

(Big picture below)

Wow, that's a sick lot, haha.. Where'd you get it? o.O Link !
(Aug. 29, 2012  5:39 PM)Olencia Wrote: I just got my new babies I've been waiting for!! =D

(Big picture below)
Where did you find that and how much was it?

Olencia
Jealous of the Drigers.
And in reply to your post about the prongs of older launchers on a beylauncher... It's really weak lol.
Nothing too special:

It arrived earlier than I expected, which I like Tongue_out