The red metallic string launcher is actually longer than the orange string launcher and METEO L-DRAGO'S beylauncher L (so 1 cm longer than lightning l-drago's beylauncher L)

I will upload the vid eventually

BTW, the rev up launcher is stronger than the string launcher, but i dont want to buy it since it breaks SO EASILY..

my friend has it, i borrowed it and tested it. When u press the button, it weakens the bey. When u pull it like a beylauncher, its powerful.

What i do is, on 3, i pull soft, on 2 a bit harder, on 1, a bit harder and on GO SHOOT I GIVE IT A POWERFUL LAUNCH!

If it doesn't break easily, it would be better than the beylauncher!

Thanks for the contribution, but most of what you've said is already known.

The rev-up launcher is bad. It has a lot of power, but you can't count it. Why Hasbro, why......

---

I'll Bite You To Death If You Disturb The Peace Or Attract A Crowd.

Isn't the rev-up launcher game breaking good but fragile? Or am I wrong.

Isn't the rev-up launcher game breaking good but fragile? Or am I wrong.

Game breaking good? Game breaking good my a$$. It's not fragile at all, it's just bad. I wouldn't get it again even if it came in an different color.

---

I'll Bite You To Death If You Disturb The Peace Or Attract A Crowd.

Isn't the rev-up launcher game breaking good but fragile? Or am I wrong.

Game breaking good? Game breaking good my a$$. It's not fragile at all, it's just bad. I wouldn't get it again even if it came in an different color.

It is if you use it like a regular beylauncher

---

Credit goes to AABeyblades for my Sig.. Check out his Shop!
http://worldbeyblade.org/Thread-AABeybla...c-Graphics

Isn't the rev-up launcher game breaking good but fragile? Or am I wrong.

Game breaking good? Game breaking good my a$$. It's not fragile at all, it's just bad. I wouldn't get it again even if it came in an different color.

It is if you use it like a regular beylauncher

I pull beylaunchers hard. If I pull the Rev-up launcher hard, then beyblade won't come off the launcher.

---

I'll Bite You To Death If You Disturb The Peace Or Attract A Crowd.

Basically a beylauncher pull with the Rev-Up works well for the first 20 or so pulls (varies to a large extent) when new, then breaks.

Third rev-up which has broken all with the same issue. It's really quite a fuss, and if you complain to Hasbro (considering and reconsidering) it's not exactly fair on them. You are using the rev-up differently to how you should leaving it to break.

Very powerful when it does work, it's like a limited use item.

---

Youtube Channel Here | Read my Story Here | Credit to Omega for the Signature

Member of The Elite Five | Visit my MFB Store (UK only)

How does it break? Is it just the handle, or is it the internal mechanisms?

---

How does it break? Is it just the handle, or is it the internal mechanisms?

The latter. I think there are problems with the gears; which makes it unable to output energy for the same pull on the string. Before the breakage, there is lots of resistance felt when pulling the string - a lot of energy is output: more than the Beylauncher. After the breakage, there is resistence felt similar to a Beylauncher with often weaker launchers than the Beylauncher.

I think the gear ratio must have changed with the breakage; plastics and HMS have more efficient gear ratios than MFB, meaning more revolutions per teeth. The rev-up somehow (intermediate 3rd gear) increases the efficiency by producing more revolutions per teeth. However,the breakage seems the nullify the effect of intermediate 3rd gear and it produces less revolutions per teeth.

I noticed the axle connected to the intermediate 3rd gear sliding back and forth into a state, where it links both the main 2 gears, completing the system. I think the breakage causes the intermediate 3rd gear to release too soon from the main gears, not giving it enough time for the stringed gear to pull the prong gears via the intermediate gear.

the rev up launcher brakes easy and its the gear it fall out of loop when half the pointy stuff on it brakes and then the gears dont hit not letting the top gear spin to produce a shot the top gives the power it is what moves the prongs the tiny gear is important i poped my first one open and the gear fell out it is still powerful as long as you have the complete timing right u press the button hard as soon as the string is out fully if you did it right then you wont hear the gears jam to a brake

---

1st Place Beyblade Colosseum 1 2013
1st Place Five Fists Beyday (Maryland Beyday 2012)

25 Tournaments Attended: 9 Placed In

Tournament List

Spoiler (Click to View)

Total 25 Tournaments, 2 HMS, 2 Plastics, 14 BB-10 MFB 7 Zero-G MFB 1 Limited

3/19/11 Spring Cherry Blossom ARISE
5/14/11 Blademore
5/29/11 Beydays come on
6/12/11 Fill my eyes double beyblade tournament
8/12/11 Summer Spin Showdown
9/18/11 Better Than School
10/16/11 The Dual Duel
11/19/11 Novembrr-Brawl
2/25/12 Leap Year Lashing
3/25/12 Cherry Blossom Combat 3rd Place
4/29/12 Spring Sortie 1st Place
5/26/12 Five Fist BeyDay 1st Place
7/22/12 The Triple Threat
8/12/12 The Lazy Hazy Swayz Beys of Summer
9/23/12 Autumn Assault 3rd Place
10/21/12 October Achtung 4th Place
11/17/12 Thrills, Spills, and Chills! 1st Place
2/2/13 Beyblade Colossuem 1st Place
3/24/13 Merry 2nd Anniversary 1st Place
4/21/13 Beyblade Revolution Qualifier
7/14/13 Heated Metal Plastic-y Madness!
1/19/14 Happy Gnu Year! 1st Place
3/30/14 GBT2: Maryland Qualifier

So based on what BladeStorm said, if the "intermediate 3rd gear" is stopping the launcher from releasing the bey efficiently (if that's what you're trying to say), then can't the problem be fixe by taking that third gear out? Think of it: a normal Beylauncher has 2 gears; one for the string and another for the prongs. The Rev-Up launcher has 3 gears; the two from above and one more connecting those two. Let's say of we took a regular Beylauncher casing and put it in; would it work? Because the two gears would be directly connected instead of being indirectly connected by a 3rd gear, thus giving the string enough time to pull the prongs.

---

Well i looked at akirasdaddy and he had one of thoughs launcher! The Rev launcher it WAS but some of them look like they already came out like the metalic launcher is already in the USA i got one of them they are blood red colour!
Also the Wind and Shoot launcher really 2011 it is already out i think this thread is worthless if the USA already has it then Japan sure should!

Isn't the rev-up launcher game breaking good but fragile? Or am I wrong.

Game breaking good? Game breaking good my a$$. It's not fragile at all, it's just bad. I wouldn't get it again even if it came in an different color.

It is if you use it like a regular beylauncher

I pull beylaunchers hard. If I pull the Rev-up launcher hard, then beyblade won't come off the launcher.

Your opinion certantly confuses me. Last time i looked, the Rev Up launcher has signifigantly more power than the string/beylauncher. Yes it can be fragile but preformance wise it dominates. Just because you may/may not have had a bad experience with it doesn't mean it is bad. Also, this isnt a bey launcher, airgo you cannot use it like a Beylauncher. A fact is a fact: While the Rev Up Launcher is easily breakable when put under high stress, in terms of raw power, it is currently the best launcher to use

---

not to say string launcher isn't good though...plus string launcher is definatly more dependable.

---

Well i looked at akirasdaddy and he had one of thoughs launcher! The Rev launcher it WAS but some of them look like they alreadwy came out like the metalic launcher is already in the USA i got one of them they are blood red colour!
Also the Wind and Shoot launcher really 2011 it is already out i think this thread is worthless if the USA already has it then Japan sure should!

if it is red, then you got the 2011 Hasbro String Launcher, not a rev up launcher.

Wind and Shoot is carp, and to my knowlage, TT doesnt sell it, only Hasbro.

Rev Up is exclusivly a Hasbro product and is currently not being sold or produced by TT.

There is no such product as "Rev and Shoot" though.

ment rev up. my bad. ill correct the post.

i blame hasbro for even releasing wind and shoot in the 1st place...piece of garbage...

i posted a picture of how the rev-up launcher broke for me if you just check the page before. . . .

the launcher is still usable though, just gets some small skippage

---

http://www.youtube.com/standupthevanguard

So based on what BladeStorm said, if the "intermediate 3rd gear" is stopping the launcher from releasing the bey efficiently (if that's what you're trying to say), then can't the problem be fixe by taking that third gear out? Think of it: a normal Beylauncher has 2 gears; one for the string and another for the prongs. The Rev-Up launcher has 3 gears; the two from above and one more connecting those two. Let's say of we took a regular Beylauncher casing and put it in; would it work? Because the two gears would be directly connected instead of being indirectly connected by a 3rd gear, thus giving the string enough time to pull the prongs.

well the launcher is bigger meanuing more space also the extra gear is the fragile one that gives it the extra boost and is the connecter to the prongs spin device to the string and top part devie sorry if im wrong i never took apart a beylauncher before without the 3rd gear it wont connect and if it did then barly a launch and if its lose unstraight weak launch

---

1st Place Beyblade Colosseum 1 2013
1st Place Five Fists Beyday (Maryland Beyday 2012)

25 Tournaments Attended: 9 Placed In

Tournament List

Spoiler (Click to View)

Total 25 Tournaments, 2 HMS, 2 Plastics, 14 BB-10 MFB 7 Zero-G MFB 1 Limited

3/19/11 Spring Cherry Blossom ARISE
5/14/11 Blademore
5/29/11 Beydays come on
6/12/11 Fill my eyes double beyblade tournament
8/12/11 Summer Spin Showdown
9/18/11 Better Than School
10/16/11 The Dual Duel
11/19/11 Novembrr-Brawl
2/25/12 Leap Year Lashing
3/25/12 Cherry Blossom Combat 3rd Place
4/29/12 Spring Sortie 1st Place
5/26/12 Five Fist BeyDay 1st Place
7/22/12 The Triple Threat
8/12/12 The Lazy Hazy Swayz Beys of Summer
9/23/12 Autumn Assault 3rd Place
10/21/12 October Achtung 4th Place
11/17/12 Thrills, Spills, and Chills! 1st Place
2/2/13 Beyblade Colossuem 1st Place
3/24/13 Merry 2nd Anniversary 1st Place
4/21/13 Beyblade Revolution Qualifier
7/14/13 Heated Metal Plastic-y Madness!
1/19/14 Happy Gnu Year! 1st Place
3/30/14 GBT2: Maryland Qualifier

The third gear gives it the power? I thought it was because the string is longer and the silver winding thingy is longer too, someone correct me if I'm wrong.

---

The anti-breaking trick is to release all tension on the string once it reaches its full length. It's that release of tension that makes the 3rd gear jam and release the bey in one movement anyway - if you maintain tension beyond that point, the jammed gear might break as described. You've got to be strong to do this and maintain control without breaking the launcher.

---

Beylon, So its something very tough to do, I suppose..... Is it SO fragile? Or it will have some better molds?

---

Team IB Revolutions

Thanks to N0body for the avatar and Synth for the signature!

Well this is one possibility in regards to innovation

Later on this year, or next year entirly, Hasbro could release a new mold for the Rev Up launcher. Logic would suggest that this mold would contain gears made of a heavier and more durable materials. The only draw back would be a that the product would end up costing a bit more. (personally I wouldn't mind that so much if I was going to receive a higher quality product, as long as the price is not outrageous of course)

Does anyone think that the stickers that come with the Rev-Up launcher are ugly?

---

I'll Bite You To Death If You Disturb The Peace Or Attract A Crowd.

So that would be where a Beylauncher suspension/rubberband trick comes in?

---

The third gear gives it the power? I thought it was because the string is longer and the silver winding thingy is longer too, someone correct me if I'm wrong.

It's called gear ratio.

http://en.m.wikipedia.org/wiki/Gear_ratio

---

http://www.youtube.com/standupthevanguard