nice thx zankye. That is so cool.

---

breaking a bey is like breaking somebody's soul and dreams. 

"When your opponent loses his luck, then take your chance immediately and don't miss it, and that's my style of blading." 

-Joe Lazure

Don't underestimate a perfect defense.

-Evel Oxford


Want to join my east nashville team? Here's the link:  


https://worldbeyblade.org/Thread-East-Na...destroyers


  

Cbt: https://worldbeyblade.org/Thread-William...ega-Thread

Is Hades H3 smaller than the TT Version? On the pictures it Looks like this.

Is Hades H3 smaller than the TT Version? On the pictures it Looks like this.

No, they should be the same size. If you mean comparing the angled shots of the two Hades, the TT photo is at a steeper angle with the Turn Frame only being seen at the bottom, while the angle of the Hasbro Hades shows Turn a little above. I don't see any difference in sizes with the two pictures side-by-side.

---

LET IT RIP!!

wbba profile

My two beys Earth Eagle, Dark Libra, forever lost,

you'll always be the one that started my hobby

and the Beyblade Geeks rekindled it.

[Image: pdXOXLR.jpg]

Is Hades H3 smaller than the TT Version? On the pictures it Looks like this.

It looks like one Hades is slightly below the other one, the way the fingers are holding the other Hades lowers it down also.  They should be the same size.


Kinda like this

---

Simply a person who likes Beyblades

Ok Thanks guys

i gotta say that i like the look of hasbro's wonder valkyrie more than TT's.
most likely the lack of metal to get dirty / grimey i guess

I CANT FRIGGN WAIT FOR HASBRO CHO Z ACHILLES AND AIR KNIGHT AUGH

---

haha animated pfp go brrrrr

god this FE6 sage sprite is amazing

My nickname is "Ink"/"Inkscape"

im an aspiring artist and beyblade enthusiast

i like burning kerberous a little TOO much

Team Leader of the Galeon Spark Knights!

https://shop.hasbro.com/en-us/search?search=Beyblade

Do you think you can jump into this store? I sure as heck can without going to that link simply by cheating the region restriction system.

---

Instructions currently unclear for Canada, Turbo Valtryek V3 and Hades H3 don’t appear there.

https://shop.hasbro.com/en-us/search?search=Beyblade

Do you think you can jump into this store? I sure as heck can without going to that link simply by cheating the region restriction system.

---

Instructions currently unclear for Canada, Turbo Valtryek V3 and Hades H3 don’t appear there.

For Toysrus and Walmart there's no sign at all this month will get Turbo Valtryek or Hades, at most through all the stores I went to there COULD be the Cross Collision set this month

https://shop.hasbro.com/en-us/search?search=Beyblade

Do you think you can jump into this store? I sure as heck can without going to that link simply by cheating the region restriction system.

---

Instructions currently unclear for Canada, Turbo Valtryek V3 and Hades H3 don’t appear there.

For Toysrus and Walmart there's no sign at all this month will get Turbo Valtryek or Hades, at most through all the stores I went to there COULD be the Cross Collision set this month

Are you referring to the large green rail arena we saw a few months ago?

For Toysrus and Walmart there's no sign at all this month will get Turbo Valtryek or Hades, at most through all the stores I went to there COULD be the Cross Collision set this month

Are you referring to the large green rail arena we saw a few months ago?

The "Large green rail arena" has had a name since it's reveal for NYTF 2019 being called the Cross Collision Battle Set, so yes.

Turbo Spryzen shouldn't be too far off its Takara Tomy counterpart given that it only has metal on the god chip (It would suck to have a painted plastic chip). For Zeta-S I'm guessing they'll probably find a way to extend the height or have a plastic extendable part around the tip of the driver.

Turbo Spryzen shouldn't be too far off its Takara Tomy counterpart given that it only has metal on the god chip (It would suck to have a painted plastic chip). For Zeta-S I'm guessing they'll probably find a way to extend the height or have a plastic extendable part around the tip of the driver.

I expect the Slingshock mode to be similar to Liner-S'

---

LET IT RIP!!

wbba profile

My two beys Earth Eagle, Dark Libra, forever lost,

you'll always be the one that started my hobby

and the Beyblade Geeks rekindled it.

[Image: pdXOXLR.jpg]

Turbo Spryzen shouldn't be too far off its Takara Tomy counterpart given that it only has metal on the god chip (It would suck to have a painted plastic chip). For Zeta-S I'm guessing they'll probably find a way to extend the height or have a plastic extendable part around the tip of the driver.

Off memory when I did my interview back in the NYTF I mentioned how the only metal for S5 is the chip in the middle and they said yes instead of "you have to wait and see". Considering that I don't think they're gonna make it plastic or screw up Spryzen, the only big difference that will happen is there's gonna be no Zeta' since Hasbro doesn't do Prime Drivers or " 'drivers"

Turbo Spryzen shouldn't be too far off its Takara Tomy counterpart given that it only has metal on the god chip (It would suck to have a painted plastic chip). For Zeta-S I'm guessing they'll probably find a way to extend the height or have a plastic extendable part around the tip of the driver.

Off memory when I did my interview back in the NYTF I mentioned how the only metal for S5 is the chip in the middle and they said yes instead of "you have to wait and see". Considering that I don't think they're gonna make it plastic or screw up Spryzen, the only big difference that will happen is there's gonna be no Zeta' since Hasbro doesn't do Prime Drivers or " 'drivers"

But the chip is going to be silver like Spryzen Requiem's, right?

Off memory when I did my interview back in the NYTF I mentioned how the only metal for S5 is the chip in the middle and they said yes instead of "you have to wait and see". Considering that I don't think they're gonna make it plastic or screw up Spryzen, the only big difference that will happen is there's gonna be no Zeta' since Hasbro doesn't do Prime Drivers or " 'drivers"

But the chip is going to be silver like Spryzen Requiem's, right?

I can't answer something I don't know, I was only told that it has metal they didn't say if it was going to be painted or not.

Wait a minute, when was the last time the Ultimate Tournament Collection was released in Australia?

Wait a minute, when was the last time the Ultimate Tournament Collection was released in Australia?

No news on the Ultimate Tournament Collection or the Snake pit here. I think Hasbro completely skipped it for us.
But it isn't all bad news for Australia! Check this:
https://www.bigw.com.au/product/beyblade.../p/821455/

It says it'll be released in stores about a week from now! Australia finally getting something ahead of schedule  Wave 2 slingshock shouldn't be too far behind either!

Hello, The Strike Valtryek Even Not Having The Locked Wings, Has It Any Difference From Genesis Valtryek? (In Its Latches As An Example)

Hello, The Strike Valtryek Even Not Having The Locked Wings, Has It Any Difference From Genesis Valtryek? (In Its Latches As An Example)

It probably has slightly more weight. It's pretty much pointless to get Strike Valtryek instead of Genesis Valtryek unless you want the whole set and like Twin Noctemis.

Hello, The Strike Valtryek Even Not Having The Locked Wings, Has It Any Difference From Genesis Valtryek? (In Its Latches As An Example)

It probably has slightly more weight. It's pretty much pointless to get Strike Valtryek instead of Genesis Valtryek unless you want the whole set and like Twin Noctemis

Does Strike Valtryek disassemble less than Genesis Valtryek?

It probably has slightly more weight. It's pretty much pointless to get Strike Valtryek instead of Genesis Valtryek unless you want the whole set and like Twin Noctemis

Does Strike Valtryek disassemble less than Genesis Valtryek?

I doubt it, but I can't say for sure because I don't have Strike Valtryek.

Does Strike Valtryek disassemble less than Genesis Valtryek?

I doubt it, but I can't say for sure because I don't have Strike Valtryek.

Many thanks for the help, I wanted a fun arena to fight with some friends, although I prefer to buy from Hasbro for the place, I think I'll try to get a B-50 (if still sell), when I do, I'll get an N3 of TT also because, Ultimate Reboot and Driver I really want !!!, If One Day I Have Extra Money, Maybe I'll Take The Battle Tower.

Cross Collision Battle Set is now out at Australian big W stores! Its also $100 AUD. If Hasbro hadn't butchered Turbo, I would have at least considered getting it.

I can see our dates and prices are different depending on which Big W website we’re at.
It could be Monday 17th online and Thursday 20th in stores.

---

It could even be $79 AUD.

---

But I do know it can still be $99 AUD after promotion.

i gotta say that i like the look of hasbro's wonder valkyrie more than TT's.
most likely the lack of metal to get dirty / grimey i guess

I CANT FRIGGN WAIT FOR HASBRO CHO Z ACHILLES AND AIR KNIGHT AUGH

I can see our dates and prices are different depending on which Big W website we’re at.
It could be Monday 17th online and Thursday 20th in stores.

---

It could even be $79 AUD.

---

But I do know it can still be $99 AUD after promotion.

Happy to see people in Australia got the Cross Collision! Hopefully this means the rest of Turbo will be released asap by July since we’re already seeing this Hasbro drop stuff like crazy.