Hasbro Beyblade Burst - Upcoming Release & Rumor Thread

(Jan. 05, 2017  12:23 AM)XYZ-Jaden Wrote: Has anybody noticed a difference in "tightness" or "burst defense" between different hasbro drivers? Cause I've found that my hasbro WSS is significantly harder to burst than my hasbro WSR, with revolve probably being the easiest driver to burst from my hasbro collection

The tightness varies between layers for example I have a S2 and it's pretty carp but my friend has a S2 also but his is tighter then mine
I've been using only one Wyvron layer, the difference I'm talking about is in the drivers
I do think that the difference would lie in the Drivers' spring and tightness, not the Layers.
So after paying on an ebay auction (22.50 for Dranzer S S.T.) I won earlier today, I just noticed Toysrus and another seller have listed the double packs. They have Odax and Spryzen, Valtryek and Unicrest, and Nepstrius and Roktavor. For some reason Horusood and Kerbeus is not listed as of now, still cool
Just picked up a combined Starter "2-Pack" from my local Target including Spryzen S2 and Valtryek V2 for $9.99. The item showed up in their scanner as  "STRING TOY" lmao.

FWIW, Valtryek and Victory Valkyrie's Over Layers are interchangeable, and I suspect some other Layers are as well. Will try this with the Doomscizor, Spryzen, and Valtryek I ordered online from TRU when they arrive.

[Image: nxJT9dn.jpg]
@[Angry Face] What screwdriver did you use?
This: http://www.ebay.com/itm/161319578754?_tr...EBIDX%3AIT Definitely the better quality tri-wing screwdriver of the two I've purchased.

Previously, I bought a cheaper one with a red handle that was decent at removing the screws of Basic Layers, but I stripped a number of Dual Layer screws with it. The one I linked to above fits both screws perfectly, so that's the one I'd recommend.
Will swapping the clear/top layers accross brands be tournament legal? I can see how it would be negligible for some dual layer beys, but some beys (like valtryek) got a slightly better mold in the hasbro version that could benefit from actual teeth rather than slopes
There's no mold difference between Valtryek V2 and Victory Valkyrie's Over Layers; only their materials differ. If anything, swapping the compatible Over Layers between brands would both slightly benefit Hasbro's Layers and hinder Takara-Tomy's by increasing the weights of Hasbro's Layers' and decreasing those of Takara-Tomy's.
Am currently at target in the Fremont hub talking to an employee about some beys they have in the back in a box
UPDATE: they had the epic rivals sets!
Don't know about starters or boosters, the only box I saw only had the sets. But hey its beyblades in america!!!
(Jan. 05, 2017  12:23 AM)XYZ-Jaden Wrote: Has anybody noticed a difference in "tightness" or "burst defense" between different hasbro drivers? Cause I've found that my hasbro WSS is significantly harder to burst than my hasbro WSR, with revolve probably being the easiest driver to burst from my hasbro collection

For sure. This is one of the main reasons this combo either will work for you or it won't (as it illustrated in my results versus 1234beyblade's): https://worldbeyblade.org/Thread-Valtrye...Discussion
Not news about the full opening of Beyblade Burst in english dub ?
Welp, finally found mine, haha:
https://imgur.com/gallery/kkSOS

Aiming to just get the 4 starters since I have the beystadium standard type.
[Image: 15878746_1383399648346037_566091487_n.jp...e=5870E17D]
[Image: 15879537_1383399651679370_1247565200_n.j...e=5871F2B9]

found this at target today, got two of the two packs, each of the 4 starters from the two packs, still waiting on the boosters and new launcher
(Jan. 06, 2017  3:34 AM)SuperKirby64 Wrote: Welp, finally found mine, haha:
https://imgur.com/gallery/kkSOS

Aiming to just get the 4 starters since I have the beystadium standard type.

What store are they at?
(Jan. 06, 2017  5:59 AM)mleunc Wrote: What store are they at?

Toys r us. Haven't seen previous posts, but I may be the odd one out, finding it at a toys r us instead of a traget haha.
Hey friends I'm not sure if this is the right place or the right format, and I apologize if this has already been done, but I've been doing a small amount of testing regarding the hasbro "light" launcher vs the Takara Tomy string launcher and I've found there's a reasonable difference between the two:

I did five spins each with my hasbro WGR(which so far has the best stamina of my hasbro combos), with the TT string launcher I used a grip

Hasbro times (in seconds)
93, 93, 90, 86, 91; average: 90.6

Takara Tomy (in seconds)
82, 82, 83, 81, 84; average: 82.4

I understand that five launches is not nearly enough to draw a solid conclusion from, but that nearly eight second difference in hasbro's favor gives me some incentive to try out that supergrip launcher and its longer winder, and, maybe some hope for hasbro's burst launchers
Is your TAKARA-TOMY Revolve good though? There are poor variations of the Revolve Driver where the parabol barely spins freely...
(Jan. 06, 2017  1:21 PM)Kai-V Wrote: Is your TAKARA-TOMY Revolve good though? There are poor variations of the Revolve Driver where the parabol barely spins freely...

I didn't use anything takara tomy save for the string launcher, that way the ONLY difference was which launcher I used. I only own one WGR and it's hasbro's. Sorry I didn't make that clear enough lol
A Vietnamese website is now selling some unreleased Beyblade Burst Beys; DoomScizor D2, Wyvron W2, Nepstrius N2 and Horosood H2. Though, they only ship to Vietnam, so you will need a Vietnam middleman. If you guys do know one, let me know ;)

Here is the site:
http://sanhangre.net/index.php?route=pro...20Beyblade
Ooft I could just ask my relatives to buy me a load of those!
I NEEEEED THAT DOOMSCIZOR! wish I knew someone in Vietnam.
(Jan. 06, 2017  9:55 AM)XYZ-Jaden Wrote: Hey friends I'm not sure if this is the right place or the right format, and I apologize if this has already been done, but I've been doing a small amount of testing regarding the hasbro "light" launcher vs the Takara Tomy string launcher and I've found there's a reasonable difference between the two:

I did five spins each with my hasbro WGR(which so far has the best stamina of my hasbro combos), with the TT string launcher I used a grip

Hasbro times (in seconds)
93, 93, 90, 86, 91; average: 90.6

Takara Tomy (in seconds)
82, 82, 83, 81, 84; average: 82.4

I understand that five launches is not nearly enough to draw a solid conclusion from, but that nearly eight second difference in hasbro's favor gives me some incentive to try out that supergrip launcher and its longer winder, and, maybe some hope for hasbro's burst launchers

I find this to be accurate. This morning I tested out Deathscyther Gravity Revolve out with the Long Winder, Speed Launcher, and Hasbro Light Launcher. (My revolve appears to be a good mold, but I have nothing to compare it to. It spins nice and freely though.)

I only had time to run one test with each launcher today, but here are the times I got;

Long Winder: 1m 57sec
Speed Beylauncher: 1m 48sec
Hasbro Launcher: 2m 04sec

So yeah, this is promising. Honestly I've been pleasently surprised by how the Hasbro launcher handles too. Once you get used to it, it's actually pretty good for doing sliding shoots and whatnot. I could never pull those off with the TT Light Launcher/Long Winder because they were so bulky and it was hard to get a comfortable grip...


Tl;dr, Hasbro launcher is gr8 m8
So while was in the car took a closer look at my new beyblade burst and notice that both my spryzen and valtryek had the wrong parts![Image: 15823546_788470377960883_233387041544592...e=591CE020][Image: 15941065_788470371294217_247486332005348...e=59193B95][Image: 15941324_788470637960857_859385859840602...e=5918A08E][Image: 15825857_788470641294190_276344849210928...e=58D5DF19][Image: 15872003_788470634627524_743822695777012...e=591BFF7C]