@[MWF]

D2 2GR (Odd) Against D2 6GAt (Even)
1. D2 6GAt Win w/ Survivor Finish
2. D2 6GAt Win w/ Survivor Finish
3. D2 6GAt Win w/ Burst Finish
4. D2 2GR Win w/ Burst Finish
5. D2 6GAt Win w/ Survivor Finish
6. D2 2GR Win w/ Survivor Finish
7. D2 2GR Win w/ Burst Finish
8. D2 6GAt Win w/ Burst Finish
9. D2 6GAt Win w/ Burst Finish
10. D2 2GR Win w/ Burst Finish
11. D2 2GR Win w/ Burst Finish
12. D2 2GR Win w/ Survivor Finish
13. D2 6GAt Win w/ Burst Finish
14. D2 6GAt Win w/ Survivor Finish
15. D2 6GAt Win w/ Burst Finish
16. D2 6GAt Win w/ Burst Finish
17. D2 6GAt Win w/ Stadium Out
18. D2 2GR Win w/ Burst Finish
19. D2 2GR Win w/ Burst Finish
20. D2 6GAt Win w/ Survivor Finish

Overall: D2 2GR: 6 BFs, 2 SFs | D2 6GAt: 6 BFs, 5SFs, 1 SO

D2 2GR Win Rate: 40%, D2 6GAt Win Rate: 60%

Also, for the D2 2GR vs D2 6GR test, I winded up breaking one of the D2 Layers, I'm guessing due to wear and tear. That clear edge on the left side of its layer got cracked and broke. And this isn't the first time this has happened to me. It may also be bc of the Hasbro D2 Layer not taking damage well in that area, which is why it will eventually crack and break. I'll replace it soon to finish the test, but I don't know when. I'm sorry for the inconvenience.

no problem, and sorry for pushing your D2 past it's limit.

It's all good. Things happen. I'll eventually replace it soon and continue your test. TBH, it's probably due to the Hasbro D2 Layer not being able to handle damage well over time in that area. But if you have other tests that don't involve D2 for the time being that you want me to do, let me know.

---

My Stuff (Click to View)

MyAnimeList | Trakt | Current Burst Part List

Burst Testing Archives (By Blader) | Burst Testing Archives (By Layer)

Key For How I Format My Test Results
OS: Out-Spin | Burst: Burst | KO: Knock-Out | Odd/Even: Alternate Launches

Thanks and have a good one!

odd combo but stationary attack testing.

gV.2V/M(if you have it).At (second full power) vs. tW.4G.O (first normal power)

---

Highly Observant Hasbro Blader.

---

odd combo but stationary attack testing.

gV.2V/M(if you have it).At (second full power) vs. tW.4G.O (first normal power)

this would be more suited when he tests gV for stationary attack my guess is it wont be good stationary

---

Fav cho-Z combos
[\spoiler]
cR with A level chip 7 Revolve
rP with A level chip 10 Cross Atomic
zA with A level chip 0 Bump Destroy
hS with A level chip 7 Glaive Bearing
vL with A level chip 0 Reach Jolt
bL with A level chip 0 Glaive Variable(worn)

odd combo but stationary attack testing.

gV.2V/M(if you have it).At (second full power) vs. tW.4G.O (first normal power)

So you want GV3 2VAt vs W3 4GO as well as GV3 MAt vs W3 4GO right? Also, my normal power is my full power, but I can also weak or moderate launch either one of the combos for you. Thanks.

---

My Stuff (Click to View)

MyAnimeList | Trakt | Current Burst Part List

Burst Testing Archives (By Blader) | Burst Testing Archives (By Layer)

Key For How I Format My Test Results
OS: Out-Spin | Burst: Burst | KO: Knock-Out | Odd/Even: Alternate Launches

Thanks and have a good one!

odd combo but stationary attack testing.

gV.2V/M(if you have it).At (second full power) vs. tW.4G.O (first normal power)

So you want GV3 2VAt vs W3 4GO as well as GV3 MAt vs W3 4GO right? Also, my normal power is my full power, but I can also weak or moderate launch either one of the combos for you. Thanks.

full power for gV and moderate for tW

---

Highly Observant Hasbro Blader.

---

@[MWF]

Wyvron W3 4Glaive Orbit (First Moderate) vs. Genesis Valtryek V3 2Glaive Atomic (Second)
- W3.4G.O: 19 OS (95% Win Rate)
- GV3.2G.At: 1 KO (5% Win Rate)

---

Wyvron W3 4Glaive Orbit (First Moderate) vs. Genesis Valtryek V3 Magnum Atomic (Second)
- W3.4G.O: 20 OS (100% Win Rate)
- GV3.M.At: 0 Wins (0% Win Rate)

---

My Stuff (Click to View)

MyAnimeList | Trakt | Current Burst Part List

Burst Testing Archives (By Blader) | Burst Testing Archives (By Layer)

Key For How I Format My Test Results
OS: Out-Spin | Burst: Burst | KO: Knock-Out | Odd/Even: Alternate Launches

Thanks and have a good one!

do u k at vs u k cy alternate launches

---

Fav cho-Z combos
[\spoiler]
cR with A level chip 7 Revolve
rP with A level chip 10 Cross Atomic
zA with A level chip 0 Bump Destroy
hS with A level chip 7 Glaive Bearing
vL with A level chip 0 Reach Jolt
bL with A level chip 0 Glaive Variable(worn)

Unicrest Knuckle Atomic (Odd) vs. Unicrest Knuckle Cycle (Even)
- U.K.At: 19 OS (95% Win Rate)
- U.K.Cy: 1 OS (5% Win Rate)

---

My Stuff (Click to View)

MyAnimeList | Trakt | Current Burst Part List

Burst Testing Archives (By Blader) | Burst Testing Archives (By Layer)

Key For How I Format My Test Results
OS: Out-Spin | Burst: Burst | KO: Knock-Out | Odd/Even: Alternate Launches

Thanks and have a good one!

Do u k at vs u k z launch in a way that it stall and avoids contact
Alternate launches

---

Fav cho-Z combos
[\spoiler]
cR with A level chip 7 Revolve
rP with A level chip 10 Cross Atomic
zA with A level chip 0 Bump Destroy
hS with A level chip 7 Glaive Bearing
vL with A level chip 0 Reach Jolt
bL with A level chip 0 Glaive Variable(worn)

Unicrest Knuckle Atomic (First) vs. Unicrest Knuckle Zephyr (Second)
- U.K.At: 13 OS (65% Win Rate)
- U.K.Z: 7 OS (35% Win Rate)

---

My Stuff (Click to View)

MyAnimeList | Trakt | Current Burst Part List

Burst Testing Archives (By Blader) | Burst Testing Archives (By Layer)

Key For How I Format My Test Results
OS: Out-Spin | Burst: Burst | KO: Knock-Out | Odd/Even: Alternate Launches

Thanks and have a good one!

My atomic is the hasbro one and got very rough and I can't lubricate it

---

('-')

My atomic is the hasbro one and got very rough and I can't lubricate it

It just needs to be used to wear down the bump that's causing the stiffness of the driver. Spin it in your hand or on the carpet.

---

LET IT RIP!!

wbba profile

My two beys Earth Eagle, Dark Libra, forever lost,

you'll always be the one that started my hobby

and the Beyblade Geeks rekindled it.

[Image: pdXOXLR.jpg]

I don't think its that simple, it may be the metal ball inside in the cace I would need to buy a new one

---

And, it won't lock in to any of my beyblades decently.

---

('-')

I don't think its that simple, it may be the metal ball inside in the cace I would need to buy a new one

---

And, it won't lock in to any of my beyblades decently.

Metal ball? I know Planet has a metal ball that is like Orbit, but there is no metal ball in Atomic.

---

LET IT RIP!!

wbba profile

My two beys Earth Eagle, Dark Libra, forever lost,

you'll always be the one that started my hobby

and the Beyblade Geeks rekindled it.

[Image: pdXOXLR.jpg]

I thought there was...?

---

('-')

I thought there was...?

[Image: 3YJFoYW.jpg]

wedge, weight, and planet are metal
yielding and bearing are POM
the others are plastic, probably ABS

Unicrest 7Cross Atomic (Odd) vs. Unicrest 7Cross Yard-S (Battle Ring Mode) (Even): Rebel Blader

Spoiler (Click to View)

1. Yr-S OS
   
2. Yr-S OS
   
3. Yr-S OS
   
4. Yr-S OS
   
5. Yr-S OS
   
6. Yr-S OS
   
7. Yr-S OS
   
8. Yr-S OS
   
9. Yr-S OS
   
10. Yr-S OS
    

- U.7C.At: 0 Wins (0% Win Rate)
- U.7C.Yr-S: 10 OS (100% Win Rate)

The reason for these results might've been because Yard-S is a little taller than most Drivers as well as the possibility that its plastic ring gives it good LAD and it won't scrape as early as the original Yard because it's higher up on the Driver.

---

My Stuff (Click to View)

MyAnimeList | Trakt | Current Burst Part List

Burst Testing Archives (By Blader) | Burst Testing Archives (By Layer)

Key For How I Format My Test Results
OS: Out-Spin | Burst: Burst | KO: Knock-Out | Odd/Even: Alternate Launches

Thanks and have a good one!

Unicrest 7Cross Atomic (Odd) vs. Unicrest 7Cross Yard-S (Battle Ring Mode) (Even): Rebel Blader

Spoiler (Click to View)

1. Yr-S OS
   
2. Yr-S OS
   
3. Yr-S OS
   
4. Yr-S OS
   
5. Yr-S OS
   
6. Yr-S OS
   
7. Yr-S OS
   
8. Yr-S OS
   
9. Yr-S OS
   
10. Yr-S OS
    

- U.7C.At: 0 Wins (0% Win Rate)
- U.7C.Yr-S: 10 OS (100% Win Rate)

The reason for these results might've been because Yard-S is a little taller than most Drivers as well as the possibility that its plastic ring gives it good LAD and it won't scrape as early as the original Yard because it's higher up on the Driver.

WOW! A better Hasbro Atomic!

---

Is testing for atomic-s done here?

---

2 Versus 2 format should be a thing. Change my mind.

Is testing for atomic-s done here?

I'll be making a testing thread for Atomic-S soon, I literally just got it haha. Haven't had a chance to test it yet, sorry.

---

My Stuff (Click to View)

MyAnimeList | Trakt | Current Burst Part List

Burst Testing Archives (By Blader) | Burst Testing Archives (By Layer)

Key For How I Format My Test Results
OS: Out-Spin | Burst: Burst | KO: Knock-Out | Odd/Even: Alternate Launches

Thanks and have a good one!

I'll be making a testing thread for Atomic-S soon, I literally just got it haha. Haven't had a chance to test it yet, sorry.

That is quite a fast reply....... 4 minutes approximately is crazy.

---

2 Versus 2 format should be a thing. Change my mind.

That is quite a fast reply....... 4 minutes approximately is crazy.

Email notifications for threads = ?

---

My Stuff (Click to View)

MyAnimeList | Trakt | Current Burst Part List

Burst Testing Archives (By Blader) | Burst Testing Archives (By Layer)

Key For How I Format My Test Results
OS: Out-Spin | Burst: Burst | KO: Knock-Out | Odd/Even: Alternate Launches

Thanks and have a good one!