If you look back on it, some of these drawings are surprisingly on point i.e. Emperor Forneus, Archer Heracles.

These designs are absolutely incredible! These should be the actual beys rather than what was released! Not that I don't like what was released, but these are better in my opinion!

---

Cuza was here.

thanks,everyone!

now...

Spoiler (Click to View)

Weiss Leopard!


so,first, the reason I didn't gave this one a combo,is because I expect wL to be the prize for the new RLC (that's also why the center part is blue: all of the RLC prizes have translucent colored plastic instead of the the transparent pastic. the layer is white)

also,apparently the newer ChoZ beys (hS,aH,rP...) have gimmicks,so I put a gimmick in this bey too: remember Kerbecs Blade Blast? it's...kinda like it's gimmick,when the opponent hit a "button" on the layer (near the head parts),the blue blades would extend to give more attack.

ah,and I kinda used Wild Liger as an inspiration because...because.

so yeah, I think the next I'm going to do is Dead Hades (I already have a design in mind for it)

The layer design looks really good, it reminds me of Pierce Hedgehog and Blizzard Orthros mixed together in a way. I can only hope the actual wL layer looks a bit like this.

---

My Cho-Z Reaper Deathscyther .12.Cr concept render, click below to see!

Spoiler (Click to View)

No I don't plan on doing more yet.

I should probably go back to making fan custom Zero G beyblade concepts again

I know that they already came out, but do hS, bL, and cR first.

After seeing this concept art, I'm gonna make my own now! And I've already got the name for it: Primal Behemoth! Could I post it here when it's done?

---

Cuza was here.

Spoiler (Click to View)

Dead Hades 14 Gate!



the layer has metal rollers,like kS,but metal...yeah,that's it



yes,the driver is the same as the driver I put in Hazard Kerbeus (but now it has a name: Gate!)


next one? ehh,maybe Orb Aegis

Pls OA next

These are all really good but Dead Hades is my favourite one of your designs

---

Eh, I will think of something to put here...

... later ;)

your Hercules is super accurate

---

Spoiler (Click to View)

Orb Aegis 18 Yard



this design was SO FUN TO DO!! well,for those who don't know,Aegis is a legendary shield in greek mythology,so...obviously a defense type.
the gimmick of the layer is that it has these two free spinning balls (not like kS or my dH,it's more like Orbit,Yard and Atomic)...because the name is literally ORB so I think this is accurate :p



the disc is 18,typical Yell-like disc.

now that i'm thinking about it,i just remembered 3 exists.

I don't have Yard,so I tried to replicate this driver just with a few youtube prints...that wasn't easy.


the next one,I already did the design actually,but I'll save for tomorrow

Spoiler (Click to View)

Grave Deathscyther 17 Volcanic!!



Layer: Grave Deathscyther: this is another design that was very fun to do,I tried to go back to the rounder D2 design,but not that round,so I put a lot of blades in it.
also,I didn't put any gimmick in this one because I coudn't think in anything,and I didn't want to reuse the Double Strike from kD.


17 is an umbalanced disc with some holes in it,basically an unbalanced Knuckle.


you probably already know Volcanic,so...yeah.

I have no idea what to do for the next beyblade

That is really cool, it's a lot more original than my Assassin Deathscyther design too ^^

---

Eh, I will think of something to put here...

... later ;)

Could you make a Super Z Alter Chronos? That would be AMAZING! Also, name suggestion for it, Temporal Chronos would best suit it in my opinion!

---

Cuza was here.

how do i send pictures?

---

i made my own buster xcalibur








the art is bad though, the combo is buster xcalibur 1 hit bounce

bounce is like unite but the plastic is replaced by metal and the rubber is replaced by polyoxymethelene (POM) and there is a spring in the POM so it will bounce back!
i came up with bounce because iron doesn't game a flower pattern

---

the art is bad

---

i know!!!

---

it was 8 o' clock!

---

Spoiler (Click to View)

ELEK ZEUS 20P.Th


Layer: Elek Zeus


the layer has 8 moving Metal balls,2 balls in each one of the bigger wings,the metal parts are painted gold.

I moved the avatar's heads to the wings,kinga like the Spriggans,just for aesthetics (definitely not because I wasn't able to draw little heads between the wings).

Disc: 20
Disc Frame: Ptera

the 20 disc is a wide disc with almost the same weight as 7.

the Ptera frame also has moving metal balls (yes,a frame with metal),it also is shaped downways,like Under or Vertical
i put Ptera as the name because of the 4 wing-shaped blades

driver: Thunder


it has a Free-Spinning metal sharp tip,and that big disc has a gimmick similar to Planet,but this time,the balls move in a horizontal line,not a round one.This would make it better...I think.


I tried to do my best on this one because I love Zeus (specially gZ) and wanted the first layer with metal parts to have a good ChoZ version.

Nice concept

---

Beyblade Burst is cool, I once made a continuation of MFB, but I stopped, but now I've restarted (Then stopped again). Geist Fafnir is also pretty cool

MR System Beyblade: https://worldbeyblade.org/Thread-4th-Season-MR-System

Nice concepts can u do a concept of a phoenix themed bey?

---

Fav cho-Z combos
[\spoiler]
cR with A level chip 7 Revolve
rP with A level chip 10 Cross Atomic
zA with A level chip 0 Bump Destroy
hS with A level chip 7 Glaive Bearing
vL with A level chip 0 Reach Jolt
bL with A level chip 0 Glaive Variable(worn)

Spoiler (Click to View)

ELEK ZEUS 20P.Th


Layer: Elek Zeus


the layer has 8 moving Metal balls,2 balls in each one of the bigger wings,the metal parts are painted gold.

I moved the avatar's heads to the wings,kinga like the Spriggans,just for aesthetics (definitely not because I wasn't able to draw little heads between the wings).

Disc: 20
Disc Frame: Ptera

the 20 disc is a wide disc with almost the same weight as 7.

the Ptera frame also has moving metal balls (yes,a frame with metal),it also is shaped downways,like Under or Vertical
i put Ptera as the name because of the 4 wing-shaped blades

driver: Thunder


it has a Free-Spinning metal sharp tip,and that big disc has a gimmick similar to Planet,but this time,the balls move in a horizontal line,not a round one.This would make it better...I think.


I tried to do my best on this one because I love Zeus (specially gZ) and wanted the first layer with metal parts to have a good ChoZ version.

HOW many balls does this bey has ? ( THE DESIGN LOOKS GOOD , but may be unbalanced  in some way )

---

 THE   Beyblader   from   ODISHA 

Spoiler (Click to View)

ELEK ZEUS 20P.Th


Layer: Elek Zeus


the layer has 8 moving Metal balls,2 balls in each one of the bigger wings,the metal parts are painted gold.

I moved the avatar's heads to the wings,kinga like the Spriggans,just for aesthetics (definitely not because I wasn't able to draw little heads between the wings).

Disc: 20
Disc Frame: Ptera

the 20 disc is a wide disc with almost the same weight as 7.

the Ptera frame also has moving metal balls (yes,a frame with metal),it also is shaped downways,like Under or Vertical
i put Ptera as the name because of the 4 wing-shaped blades

driver: Thunder


it has a Free-Spinning metal sharp tip,and that big disc has a gimmick similar to Planet,but this time,the balls move in a horizontal line,not a round one.This would make it better...I think.


I tried to do my best on this one because I love Zeus (specially gZ) and wanted the first layer with metal parts to have a good ChoZ version.

HOW many balls does this bey has ? ( THE DESIGN LOOKS GOOD , but may be unbalanced  in some way )

welll...14...

---

 METAL BALLS EVERYWHERE

thanks,everyone!

now...

Spoiler (Click to View)

Weiss Leopard!


so,first, the reason I didn't gave this one a combo,is because I expect wL to be the prize for the new RLC (that's also why the center part is blue: all of the RLC prizes have translucent colored plastic instead of the the transparent pastic. the layer is white)

also,apparently the newer ChoZ beys (hS,aH,rP...) have gimmicks,so I put a gimmick in this bey too: remember Kerbecs Blade Blast? it's...kinda like it's gimmick,when the opponent hit a "button" on the layer (near the head parts),the blue blades would extend to give more attack.

ah,and I kinda used Wild Liger as an inspiration because...because.

so yeah, I think the next I'm going to do is Dead Hades (I already have a design in mind for it)

How I wish the actual vise Leopard looked like this...

---

Spoiler (Click to View)

Spoiler (Click to View)

Spoiler (Click to View)

Spoiler (Click to View)

Spoiler (Click to View)

Spoiler (Click to View)

hi

so,it has been a while that I didn't post anything because my cellphone broke like,a lokg time ago, and I was able to repair it just last week.

expect more designs coming soon!

so,it has been a while that I didn't post anything because my cellphone broke like,a lokg time ago, and I was able to repair it just last week.

expect more designs coming soon!

Got any new designs?









Subtle bump shh

---

oh no i just woke up and two years have passed where am i what happened

soo...it's been a while,huh?

this design was supposed to be for Xandork's contest, but as I said in the contest's proper thread, last school tests got in the way and I coudn't finish it in time
but I'm finally free now! yay!
so here it is...

Spoiler (Click to View)

Tactic Ronin 14 Rumble
(tR.14.Rm)

layer: Tactic Ronin (tR)



here is the layer, it's a balance type layer with 2 modes: Attack and Defense.
(fun fact: when I was doing this for the contest,it was supposed to have no gimmick, but when I was finishing it,I decided to put one in it but the design was already finished, so I had to look at it's design and think of a gimmick for it haha)
in Attack mode,the swords are immobile and in a sloped angle to do some upper attack.
in Defense mode,the swords are now in a straight angle and a little pushed out,they are supposed to work like hK's chains,cushioning the impacts.

I made a quick illustration of the two modes,hope you understand it xD


Core Disc: 14

the  blades in the 14 disc are sloped and  meant to give upper force and stamina to the beyblade. I really liked to draw this disc (actually I loved to draw every part of this beyblade)
 

Driver: Rumble (Rm)

(ok,the idea of this gimmick is really crazy, I love it haha)
you know when, in the anime, Spriggan Requiem/Cho-Z Spriggan jumps and switches the mode of the Zeta driver? so,with this driver,it works like a Final Survive,but when it releases the stamina driver,it also releases a spring that makes it jump to try and hit the opponent downwards.
It's...definitely not competitive,it would be a just-for-fun driver,like Operate,haha
actually...I don't even know if these gimmicks (both the layer's and the driver's) are physically possible to make irl,I just though they would be fun xD (one of the reasons it was supposed to have no gimmicks when I was making it for the contest)

EDIT: forget the angle changing of the swords,they are always straight,I don't think it would even be possible to make a gimmick lie that.

soo...it's been a while,huh?

this design was supposed to be for Xandork's contest, but as I said in the contest's proper thread, last school tests got in the way and I coudn't finish it in time
but I'm finally free now! yay!
so here it is...

Spoiler (Click to View)

Tactic Ronin 14 Rumble
(tR.14.Rm)

layer: Tactic Ronin (tR)



here is the layer, it's a balance type layer with 2 modes: Attack and Defense.
(fun fact: when I was doing this for the contest,it was supposed to have no gimmick, but when I was finishing it,I decided to put one in it but the design was already finished, so I had to look at it's design and think of a gimmick for it haha)
in Attack mode,the swords are immobile and in a sloped angle to do some upper attack.
in Defense mode,the swords are now in a straight angle and a little pushed out,they are supposed to work like hK's chains,cushioning the impacts.

I made a quick illustration of the two modes,hope you understand it xD


Core Disc: 14

the  blades in the 14 disc are sloped and  meant to give upper force and stamina to the beyblade. I really liked to draw this disc (actually I loved to draw every part of this beyblade)
 

Driver: Rumble (Rm)

(ok,the idea of this gimmick is really crazy, I love it haha)
you know when, in the anime, Spriggan Requiem/Cho-Z Spriggan jumps and switches the mode of the Zeta driver? so,with this driver,it works like a Final Survive,but when it releases the stamina driver,it also releases a spring that makes it jump to try and hit the opponent downwards.
It's...definitely not competitive,it would be a just-for-fun driver,like Operate,haha
actually...I don't even know if these gimmicks (both the layer's and the driver's) are physically possible to make irl,I just though they would be fun xD (one of the reasons it was supposed to have no gimmicks when I was making it for the contest)

Nice Job!