General Hasbro BEYBLADE:Metal Fury/Shogun Steel/Beyblades Legends -FALL 2014 [HOBBY]

(Sep. 19, 2014  9:00 PM)Annoying-Fork Wrote: I've had terrible, no good, very bad luck with Metal Fusion quality consistency back when it first shown up here in Texas. If it weren't loose fitting parts, every track below 105 would break like Gold Plastic in 80's toys.

I'm not sure why but the Metal Fusion plastic is better quality in some cases than Metal Masters and onwards as the tips wear down extremely quickly and tips like EWD don't last very long in general but the Metal Master and Metal fury plastic seem to wear it down even faster, I noticed this in Twisted Tempo where when it's battled enough it's an extremely ball flat like bottom, I have had my Metal fusion WD which lasted much longer and to this day are better in quality. I never noticed this on CS however, and rubber and metal bottoms are fine, it could just be me but I wanted to point it out, yes my Shogun Steel was the same as my SD is now a Ball Defense like bottom and I bet Legends could be that way too.
The RDF on my Quetzacoatl is like perfect, I congratulate Hasbro for a job well done.
Good News Hubbinator.

I see a single pack named Ldrago Destructor F: S but in the pack its Diablo Nemesis X: D I take a pics with my cell phone and I will try to post it here.

probably an error when they pack it.

else in my walmart they must have the two double pack Attack and defense and 2 "ldrago Destructor" Diablo Nemesis.
i got a mission for you meet me at 20th seteember 2014 regents park
[/size][/font]
(Sep. 19, 2014  9:54 PM)supergash Wrote: i got a mission for you meet me at 20th seteember 2014 regents park
[/size][/font]

what are you talking about?!
(Sep. 19, 2014  9:30 PM)JinbeeTheShark Wrote:
(Sep. 19, 2014  9:00 PM)Annoying-Fork Wrote: I've had terrible, no good, very bad luck with Metal Fusion quality consistency back when it first shown up here in Texas. If it weren't loose fitting parts, every track below 105 would break like Gold Plastic in 80's toys.

I'm not sure why but the Metal Fusion plastic is better quality in some cases than Metal Masters and onwards as the tips wear down extremely quickly and tips like EWD don't last very long in general but the Metal Master and Metal fury plastic seem to wear it down even faster, I noticed this in Twisted Tempo where when it's battled enough it's an extremely ball flat like bottom, I have had my Metal fusion WD which lasted much longer and to this day are better in quality. I never noticed this on CS however, and rubber and metal bottoms are fine, it could just be me but I wanted to point it out, yes my Shogun Steel was the same as my SD is now a Ball Defense like bottom and I bet Legends could be that way too.
The very first wave of Metal Masters and All of Metal Fusion had the best quality.
Hasbro dropped the ball.
https://www.youtube.com/watch?v=YkQMHRJYLBU
_______________________________________________________________________________________________
Beyblade Legends 2 Pack Cyclone Herculeo + Ray Gil Unboxing Review Giveaway Oct 26th 2014

Enjoy Smile
(Sep. 20, 2014  3:25 AM)originalzankye Wrote: https://www.youtube.com/watch?v=YkQMHRJYLBU
_______________________________________________________________________________________________
Beyblade Legends 2 Pack Cyclone Herculeo + Ray Gil Unboxing Review Giveaway Oct 26th 2014

Enjoy Smile

very cool, thanks Zankye
(Sep. 20, 2014  1:57 AM)Neo Wrote:
(Sep. 19, 2014  9:30 PM)JinbeeTheShark Wrote:
(Sep. 19, 2014  9:00 PM)Annoying-Fork Wrote: I've had terrible, no good, very bad luck with Metal Fusion quality consistency back when it first shown up here in Texas. If it weren't loose fitting parts, every track below 105 would break like Gold Plastic in 80's toys.

I'm not sure why but the Metal Fusion plastic is better quality in some cases than Metal Masters and onwards as the tips wear down extremely quickly and tips like EWD don't last very long in general but the Metal Master and Metal fury plastic seem to wear it down even faster, I noticed this in Twisted Tempo where when it's battled enough it's an extremely ball flat like bottom, I have had my Metal fusion WD which lasted much longer and to this day are better in quality. I never noticed this on CS however, and rubber and metal bottoms are fine, it could just be me but I wanted to point it out, yes my Shogun Steel was the same as my SD is now a Ball Defense like bottom and I bet Legends could be that way too.
The very first wave of Metal Masters and All of Metal Fusion had the best quality.
Hasbro dropped the ball.
I agree, anything sharp from that point always wears quicker than it should, and I don't use it as much, though my W2D actually kinda lasted which I must admit I never saw coming.

I'm not sure if I'm counting Flat tip, they don't wear as quickly but still wear quicker in the Metal masters and beyond plastic, my Rock Giraffes WB is flattened pretty badly so I angle the shots to stop that which isn't great.

EDIT: The plastic HF in all Thermal Lacerta surprisingly stays flattened enough even after extensive use, at least for me.
There are some things I like about Hasbro, especially some of the recolors in their 2-packs like Hyper Orso & Grand Cetus which both are part of my most favorite recolors, especially because of the nice clear colors of the Energy Rings and the stickers.
I also like some Spark FX Hyperblades like Cosmic Pegasus and Blitz Striker, because they both are great recolors, even Variares is a cool-looking bey while it is spinning.
And the quality (as JinBeeTheShark said before) of, for example the HF:
The HF of my Hasbro Cyber Pegasus was great, the HF of Takaras Gryph Girago... well, it looks like circle drawing of a child now Tongue_out_wink

But all in all Hasbro "quality" is not that good. Takaras printings are way better than Hasbros, Hasbro clear plastic parts are dull and if you compare the parts with Takara Tomy... Takara looks a lot better in my opinion.
Then the messed-up colors in Metal Fury... I expected a lot for Legends, but the 2-packs... I really dislike the color combinations and the dull parts, no stickers... it's not something to keep because of the good look, but that's only my opinion.

PS: Hasbros Zurafa recolors:
So the 2-pack one with Torch Gemios is blue... the one that comes with the Duotron launcher is blue... so how to color the new one in the balance pack? What about blue, great! XD
(Sep. 20, 2014  12:07 PM)DrigerGatling Wrote: There are some things I like about Hasbro, especially some of the recolors in their 2-packs like Hyper Orso & Grand Cetus which both are part of my most favorite recolors, especially because of the nice clear colors of the Energy Rings and the stickers.
I also like some Spark FX Hyperblades like Cosmic Pegasus and Blitz Striker, because they both are great recolors, even Variares is a cool-looking bey while it is spinning.
And the quality (as JinBeeTheShark said before) of, for example the HF:
The HF of my Hasbro Cyber Pegasus was great, the HF of Takaras Gryph Girago... well, it looks like circle drawing of a child now Tongue_out_wink

But all in all Hasbro "quality" is not that good. Takaras printings are way better than Hasbros, Hasbro clear plastic parts are dull and if you compare the parts with Takara Tomy... Takara looks a lot better in my opinion.
Then the messed-up colors in Metal Fury... I expected a lot for Legends, but the 2-packs... I really dislike the color combinations and the dull parts, no stickers... it's not something to keep because of the good look, but that's only my opinion.

PS: Hasbros Zurafa recolors:
So the 2-pack one with Torch Gemios is blue... the one that comes with the Duotron launcher is blue... so how to color the new one in the balance pack? What about blue, great! XD

I was talking about Hasbro itself when I said the tips wear too quickly, but this implies to Metal Masters and beyond, I'm not too sure about Takara Tomy since I don't own much of them.
Yeah I got that, I just wanted to say that the "old" Hasbro parts (like in Metal Fusions Cyber Pegasus) were pretty good compared to Takara, also the RF of my Storm Pegasus. Maybe it's just me, but I remember that my Takara RF wasn't as durable.
(Sep. 20, 2014  12:31 PM)DrigerGatling Wrote:
Yeah I got that, I just wanted to say that the "old" Hasbro parts (like in Metal Fusions Cyber Pegasus) were pretty good compared to Takara, also the RF of my Storm Pegasus. Maybe it's just me, but I remember that my Takara RF wasn't as durable.

Alright cool, when you say "wasn't as durable" do you mean the RF wears too quickly or do you mean something else?

Sorry for getting off topic.
Cool, so it appears that Brisk AquarioHD found a couple of listings of Beyblade Legends up for listing on Amazon. That in mind, I really hope we can be seeing a couple of items on the shelves in stores sometime soon! I'm sure most of us want to have our hands on a couple of new R2F's and BD145's faster, too, haha:
Great finds, as well, Zankye! Catching them in Richmond Hill is awfully good news for Torontonian bladers like me!
Finally, Hell Cerbex. That is still one of the most fantastically detailed Beyblades in the series IMO.
(Sep. 20, 2014  11:48 PM)Annoying-Fork Wrote: Finally, Hell Cerbex. That is still one of the most fantastically detailed Beyblades in the series IMO.

For me Diablo or Death are also detailed, I hope this series also releases the actual colours of Cyber Aquario etc.
Just found Fang Leone and Death Q in my Walmart! Sadly, can't buy it Uncertain still cool tho Smile
(Sep. 20, 2014  11:58 PM)JinbeeTheShark Wrote:
(Sep. 20, 2014  11:48 PM)Annoying-Fork Wrote: Finally, Hell Cerbex. That is still one of the most fantastically detailed Beyblades in the series IMO.

For me Diablo or Death are also detailed, I hope this series also releases the actual colours of Cyber Aquario etc.

I didn't have anything against Hasbro's recolor, but I admit to being a touch salty over not having that stunning Topaz blue Aquario wheel. Tongue_out

Oh yeah, Diablo too. That by default is unparalleled in the finer details.
(Sep. 21, 2014  12:39 AM)Annoying-Fork Wrote:
(Sep. 20, 2014  11:58 PM)JinbeeTheShark Wrote:
(Sep. 20, 2014  11:48 PM)Annoying-Fork Wrote: Finally, Hell Cerbex. That is still one of the most fantastically detailed Beyblades in the series IMO.

For me Diablo or Death are also detailed, I hope this series also releases the actual colours of Cyber Aquario etc.

I didn't have anything against Hasbro's recolor, but I admit to being a touch salty over not having that stunning Topaz blue Aquario wheel. Tongue_out

Oh yeah, Diablo too. That by default is unparalleled in the finer details.

Actually the clear wheel colour of Aquario was what I wanted the most.
So I went to Walmart, and my oh my they had the attack and defense 2-packs. I was so excited for a new RS I bought a defense pack. I go home, open it, and although the RS is fixed, it is ever so slightly crooked. Sigh, Hasbro strikes again.
https://www.youtube.com/watch?v=lrySRi1MVDo
Beyblade Legends Hyperblades BB-106 Fang Leone 130W2D Review Unboxing Giveaway Exp Nov 2nd 2014
(Sep. 21, 2014  2:15 AM)Hubbinator Wrote: So I went to Walmart, and my oh my they had the attack and defense 2-packs. I was so excited for a new RS I bought a defense pack. I go home, open it, and although the RS is fixed, it is ever so slightly crooked. Sigh, Hasbro strikes again.
I think that problem can be experienced with any toy company, not just Hasbro. It's the way it's manufactured; You can't expect perfection when the machine could have errors at any time. Still, sorry to hear you got a messed up part. Uncertain Try contacting Hasbro, they may be able to send you a replacement.
Man, I could really use a Rock Zurafa! I was at Toys R Us today for orientation but I wanted to wait until I have my discount. Hopefully I'll be able to pick some things up when I work on Friday and see if anything new is in stock Smile
(Sep. 21, 2014  12:23 AM)hb42 Wrote: Just found Fang Leone and Death Q in my Walmart! Sadly, can't buy it Uncertain still cool tho Smile

What state do you live in?
(Sep. 21, 2014  8:10 PM)Exotics King Wrote:
(Sep. 21, 2014  12:23 AM)hb42 Wrote: Just found Fang Leone and Death Q in my Walmart! Sadly, can't buy it Uncertain still cool tho Smile

What state do you live in?

Erm, I live in Ontario, not a state in the USA.