Here's my entry!
I hope you all like it. I have tried very hard to make it, because I suck at drawing.
Also, you may make fun of my drawing and handwriting. I am quite infamous for both in my school.
https://picasaweb.google.com/10053983145...1326300690

Here's the article. Towards the end, I've written a special note which acquaints everyone with the basis of my ideas.

Spoiler (Click to View)

STARBLAST QUASAR B: H

FACEBOLT- Quasar
The face depicts a Quasar; a very energetic and distant active galactic nucleus.

CLEAR WHEEL- Quasar
Weight- 3 grams
Quasar is a heavy, irregular clear wheel. It comes in various colors, which can be obtained randomly. It is shaped like a quasar, and also resembles the shape of the traditional Beigoma. Its weight makes it suitable for Defense and Stamina customs, but the irregular design mars its performance. It may still be used as a clear wheel for revealing the contact points of a few metal wheels. The main feature of Quasar is that it is compatible with both, Left Spin and Right Spin Metal Wheels.

METAL WHEEL- Starblast
Weight- 39 grams
Starblast is an extremely unique metal wheel. Starblast’s original release is a pearl white color. Starblast represents a stellar explosion, which accounts for the numerous spikes, and white color. Starblast’s uniqueness lies in the fact that it is made to counter low-height combos. A MFB equivalent of the legendary 8 spiker, it boasts decent smash. Starblast seems to have an attached core, which bears 8 spikes too. These 8 spikes lie below the original set of spikes, and are made to counter low height combos. They lie a little lower than the original set of spikes, resembling the normal mode of BD145. Starblast has got a lot of attack, but like Basalt, Starblast has a design which hinders its balance.
On top of the wheel, there are extremely small spike-like protrusions which represent the fragments of a star. The spikes hold resemblance to the spikes on BD145. This bad weight distribution could be put to use against low track combos, as it produces a ‘Wobble Attack’. As the bey wobbles, the spikes at the bottom make contact with the low track combos, producing a powerful attack. Unfortunately, when used on a low track, this wheel has scraping problems.

4D BOTTOM- B: H (Black Hole)
Weight- 15 grams
As the name implies, this 4D bottom represents a Black Hole. Surprisingly, its white colored. The 4D bottom has an interesting gimmick based on the weight of the metal wheel. Black Hole consists of a XB (Xtreme Ball) encasing a black colored HF bottom.
The opening up of a white colored XB to reveal a black HF signifies the death of a star.
That is, a huge, spherical star (XB) explodes and forms a Black Hole (HF).
The bottom consists of casings which open up due to centrifugal force. As the casings open up, they become parallel to the metal wheel, and act in a way similar to C145, except that the casings do not spin freely. XB is made out of Polyoxomethylene (POM) plastic, a type of plastic which significantly reduces the friction of the bottom with the stadium floor; aiding for smooth mode change. The mode change of Black Hole from XB to HF is weight based-
If the bottom is carrying an overall weight (Face+CW+MW) of-
33 grams and less, there is an immediate mode change from XB to HF.
34 grams-40grams, results in a mode change soon after the battle has commenced.
41 grams and more, results is no mode change, or a mode change towards the end.
To loosen the casings so that they may open, the bey needs to make harsh contact with the opposing bey. To open the casings of the light weight beys (33grams and less), contact with the stadium floor is enough. Its height equivalent is a 210 track.

OVERALL-
Starblast Quasar B: H is a decent purchase for everyone. Be it a competitive player or a collector, Starblast Quasar is promising. Starblast provides extremely powerful attack, and B: H has its uses. Low friction due to POM plastic accounts for great stamina, while HF gives decent attack. Though Quasar’s uses are negligible, it is a part of high collective value, as it is released in various colors.

Notes by Janstarblast-
Well, Starblast Quasar is based completely on the theme- “Death of a Star”. I have tried to make the parts useful, though they have a few flaws to them. As every maker wants his beys to sell a lot, he tries to make them useful or beautiful. As Quasar was a useless part, I made it a ‘cosmetic part’ by releasing it in various colors which may account as a ‘business trick!’ I hope you all like it!
While making this bey, I was extremely upset about my bad drawing. Hence, I made this bey more analytical than beautiful. A LOT of time has been spent to check if everything works well or not. I’d give a brief acknowledgement here-

Thanks to wikipedia for the photos of a quasar, this helped me draw the Face and Clear Wheel.
Thanks to Beybladespirit for the name of the plastic used for PD bottom.
Thanks to a McDonald’s Pokemon toy for the idea of B: H.
Thanks to 8 spiker for the design of Starblast.

Well, that’s it! I hope everyone liked my bey, and hope it shall be considered at least. I am sorry as the circumstances here didn’t allow me to complete my drawing. So, I hope that my drawing shall at least explain the concept of my bey. I know it might be a bit unclear, so I’ve posted it 2 days before the contest ends… Actually I wanted to post my entry earlier, but as I said- It was tough to do everything due to LOADS of work from school.

EDIT-
SHOOT ME DOWN WITH QUESTIONS!

---

Team IB Revolutions

Thanks to N0body for the avatar and Synth for the signature!

Here another reason where you got starblast: from your name!

Nice entry, jan! I think you will reach 4th! Or higher!

---

Follow me on Twitter: @SynthGraphics

Thanks a lot, DeX!
Yes, Starblast is my signature metal wheel. I'd mentioned it earlier!

---

Team IB Revolutions

Thanks to N0body for the avatar and Synth for the signature!

one thing, scale. no offence but the clear wheel's bigger than the metal wheel! anyway I like the design, but starblast also reminded me of sol. the tip is nice, and it looks very tall, which is good for real life occasions, but again that could just be the scale problems, anyway I still like it, and only 2 days to go!

---

Here's my entry!
I hope you all like it. I have tried very hard to make it, because I suck at drawing.
Also, you may make fun of my drawing and handwriting. I am quite infamous for both in my school.
https://picasaweb.google.com/10053983145...1326300690

Here's the article. Towards the end, I've written a special note which acquaints everyone with the basis of my ideas.

Spoiler (Click to View)

STARBLAST QUASAR B: H

FACEBOLT- Quasar
The face depicts a Quasar; a very energetic and distant active galactic nucleus.

CLEAR WHEEL- Quasar
Weight- 3 grams
Quasar is a heavy, irregular clear wheel. It comes in various colors, which can be obtained randomly. It is shaped like a quasar, and also resembles the shape of the traditional Beigoma. Its weight makes it suitable for Defense and Stamina customs, but the irregular design mars its performance. It may still be used as a clear wheel for revealing the contact points of a few metal wheels. The main feature of Quasar is that it is compatible with both, Left Spin and Right Spin Metal Wheels.

METAL WHEEL- Starblast
Weight- 39 grams
Starblast is an extremely unique metal wheel. Starblast’s original release is a pearl white color. Starblast represents a stellar explosion, which accounts for the numerous spikes, and white color. Starblast’s uniqueness lies in the fact that it is made to counter low-height combos. A MFB equivalent of the legendary 8 spiker, it boasts decent smash. Starblast seems to have an attached core, which bears 8 spikes too. These 8 spikes lie below the original set of spikes, and are made to counter low height combos. They lie a little lower than the original set of spikes, resembling the normal mode of BD145. Starblast has got a lot of attack, but like Basalt, Starblast has a design which hinders its balance.
On top of the wheel, there are extremely small spike-like protrusions which represent the fragments of a star. The spikes hold resemblance to the spikes on BD145. This bad weight distribution could be put to use against low track combos, as it produces a ‘Wobble Attack’. As the bey wobbles, the spikes at the bottom make contact with the low track combos, producing a powerful attack. Unfortunately, when used on a low track, this wheel has scraping problems.

4D BOTTOM- B: H (Black Hole)
Weight- 15 grams
As the name implies, this 4D bottom represents a Black Hole. Surprisingly, its white colored. The 4D bottom has an interesting gimmick based on the weight of the metal wheel. Black Hole consists of a XB (Xtreme Ball) encasing a black colored HF bottom.
The opening up of a white colored XB to reveal a black HF signifies the death of a star.
That is, a huge, spherical star (XB) explodes and forms a Black Hole (HF).
The bottom consists of casings which open up due to centrifugal force. As the casings open up, they become parallel to the metal wheel, and act in a way similar to C145, except that the casings do not spin freely. XB is made out of Polyoxomethylene (POM) plastic, a type of plastic which significantly reduces the friction of the bottom with the stadium floor; aiding for smooth mode change. The mode change of Black Hole from XB to HF is weight based-
If the bottom is carrying an overall weight (Face+CW+MW) of-
33 grams and less, there is an immediate mode change from XB to HF.
34 grams-40grams, results in a mode change soon after the battle has commenced.
41 grams and more, results is no mode change, or a mode change towards the end.
To loosen the casings so that they may open, the bey needs to make harsh contact with the opposing bey. To open the casings of the light weight beys (33grams and less), contact with the stadium floor is enough. Its height equivalent is a 210 track.

OVERALL-
Starblast Quasar B: H is a decent purchase for everyone. Be it a competitive player or a collector, Starblast Quasar is promising. Starblast provides extremely powerful attack, and B: H has its uses. Low friction due to POM plastic accounts for great stamina, while HF gives decent attack. Though Quasar’s uses are negligible, it is a part of high collective value, as it is released in various colors.

Notes by Janstarblast-
Well, Starblast Quasar is based completely on the theme- “Death of a Star”. I have tried to make the parts useful, though they have a few flaws to them. As every maker wants his beys to sell a lot, he tries to make them useful or beautiful. As Quasar was a useless part, I made it a ‘cosmetic part’ by releasing it in various colors which may account as a ‘business trick!’ I hope you all like it!
While making this bey, I was extremely upset about my bad drawing. Hence, I made this bey more analytical than beautiful. A LOT of time has been spent to check if everything works well or not. I’d give a brief acknowledgement here-

Thanks to wikipedia for the photos of a quasar, this helped me draw the Face and Clear Wheel.
Thanks to Beybladespirit for the name of the plastic used for PD bottom.
Thanks to a McDonald’s Pokemon toy for the idea of B: H.
Thanks to 8 spiker for the design of Starblast.

Well, that’s it! I hope everyone liked my bey, and hope it shall be considered at least. I am sorry as the circumstances here didn’t allow me to complete my drawing. So, I hope that my drawing shall at least explain the concept of my bey. I know it might be a bit unclear, so I’ve posted it 2 days before the contest ends… Actually I wanted to post my entry earlier, but as I said- It was tough to do everything due to LOADS of work from school.

EDIT-
SHOOT ME DOWN WITH QUESTIONS!

Im sorry cause this made me laugh "quasar" ^^2 posts up

---

Follow me on Twitter @MahoutsukaiDomo

Nice one jan, but...the way the XB is pulled up, I have a question, wont it fall back again when the RPM falls and then scrape? Since my bey's track also works in the same way almost(coincidence ) I want to know how exactly does the mode remain HF even after spin reduces.

@Nwolf- Oh man! I wrecked it! Well, now I can do nothing as my first entry is my final entry...
Kai-V- To rectify this error, may I mention the dimensions in the Beywiki-style article now?
Sniper- What do you mean?

EDIT-
Sam-Well, no it doesn't. I knew this question was coming. Well, the casings contain a spring at the top, which force the casings to open up. But, the bottom part has a locking system, similar to the ones of a plastic generation spin gear casings. You know how we get 2 parts(casings) which join to give us a spin gear? Its similar to that.
Here's a pic from Beywiki- http://wiki.worldbeyblade.org/index.php/...Gapart.jpg
Do you know how these 2 casings encase the metal ring and that gear join together? Also, you might be knowing that these casings are loosely held, and if you drop it from a height, they get separated. In the same way, B: H opens up. Just that it is held in place by a spring.
Also, the opening mechanism may be compared to Bakugan's opening mechanism. The springs keep the XB is position once it opens up.
As I said in the Beywiki-style article, the bey needs to make harsh contact; either with the stadium floor, or with the opposing bey. This causes tension on the spring, and the casings open up, as while making contact, even the locking system gets loosened a bit.

---

Team IB Revolutions

Thanks to N0body for the avatar and Synth for the signature!

OK, my entry is..... Cosmic Supernova N : B !

well i thought of the same name Cosmic supernova well i think i can still use it as kai-v said a name can be used similar to any others but the parts should not be copied and it must remain original entry

yeah, but.. thats not my full entry.. it somehow autoposted before i added more pics.abnd im waiting for kaiv to comferm to re enter.

---

I was qwertxj3

Spoiler (Click to View)

All credit goes to SDamonCronous for this awesome sig!
Check his shop! http://worldbeyblade.org/Thread-SDamonCr...S-Now-Open
[img][/img]
Please click it! It needs your help to grow!
Call me Q3

has the contest ended already? must we upload blue prints? if not my entry (redesign origin parts) super nova Pegasus final blaze F:B starts as rubber hole flat/coat sharp sharp rhf is the original hf/s tip with rubber coating towards not at bottom of tip to increase friction when it hits the storm ridge also it would not be sticking out it would be incorporated as part of the tip's side the cs would have the s more prominent also unlike the hf/s the other piece of this is when like all 4d's tracks are the force is lowers and retracts the original tip and the new tip is a r2f to produce a excellent amount of Chance of a stadium out with what spin it has left

super nova is a 4 mode'd metal wheel the designs based of of pieces of thermal burn and flame burn's side where "burn wheel" would be normally would be downsized slightly and filled in to add weight also the gashes from thermal would be widened and more prominent also slightly separated as part of the mode change the burn wheels side will be broken in to 4 with a space between for the metal frame and the core would consist of the points from flame would become skinner and longer as well as appose able and can be sided out as part of the mode change also the writing would change so it would say "S-NOVA frame. the mode change happens when dissembled and rotated in some direction like most 4d but unlike most 4d you must move the frames "contact points" for the last 2 mode changes and you have the option of having the frame in 3 places and still have no mode change placement is also guided on by the thermal's second point (the one in the middle) but is optional but desired effects are based appon original placement mode. first mode 1.beginning blast the frame has the points locked in to the area where the burn wheel is separated to allow for more defense and no gaps to increase defense when the cs tip is in use.2.star explosion: the frame is re positioned and the points stay the same causing for blunt edges for smash attack 3. energy reflector same as before only reposition the claws which ever direction the blade spins(yay spoilers) to provide smash attach and upper attack 4. gamma ray mode reposition the points same direction as spin this will allow for spin stealing and high defense

the Pegasus wheel will be a mirrored Pegasus 3 wheel with the Pegasus heads ramming into each other one colored blue one red like clones with different colors to id which one

---

Hue.

Holy carp, Jan and I had the exact same design for the Quasar Face. XD I didn't copy, btw.

Yours looks amazing, though! Mine is horrible tbh. You deserve a Strongest Blader Set.

---

Wrath|My YouTube Channel|My Selling Thread|My Facebook Page

My entry

Martian RA160CO
Type - Defence

Pictures -

[<Insert "Spoiler" Here>]
Face bolt - http://imageshack.us/photo/my-images/833...11207.jpg/
Fusion wheel with face - http://imageshack.us/photo/my-images/836...11220.jpg/
Assembled top view/ fusion wheel with face - http://imageshack.us/photo/my-images/851...11215.jpg/
Assembled side view - http://imageshack.us/photo/my-images/535...11205.jpg/
http://imageshack.us/photo/my-images/233...11204.jpg/
http://imageshack.us/photo/my-images/836...11214.jpg/
RA160 - http://imageshack.us/photo/my-images/821...11213.jpg/
http://imageshack.us/photo/my-images/823...11212.jpg/
CO - http://imageshack.us/photo/my-images/62/...11210.jpg/
http://imageshack.us/photo/my-images/38/...11209.jpg/
[<Insert "/Spoiler" Here]

Desription -
[<Insert "Spoiler" Here>]
Face – Martian

The face bolt depicts an alien being or creature from outer space known as a “Martian”. “Martians” are known to be the inhabitants of the 4th planet in the solar system, known as Mars, from which its name is derived. The design features a highly complex brain like structure and the planet Mars with eyes which is on its axis in the background. The emblem is tattooed in brown colour on a face bolt that is pearl red in colour. Since it is a 4D face bolt, it 0.1 grams heavier than the original ones.

Fusion wheel – Martian

Martian is a left spin only part like Lightning, Meteo, and L – Drago Destroy. Like Variares, the clear wheel is combined with the metal wheel. Martian basically consists two semi-circular prominences with two eyeball like structures protruding from the gaps between the semi - circular prominences which give breadth to its design. It bears some resemblance to the Vulcan fusion wheel as both of them have a similar shape. The fusion wheel is mostly covered with rubber, but due to its shape, it has some recoil.
The eyeball like structures depicts the eyes of a Martian. The rubber on the fusion wheel is coloured red and all the parts that are in red colour on the fusion wheel are covered with rubber. The rubber represents Mars as Mars is known as the red planet. This rubber on the fusion wheel is also used to describe the Beyblade’s beasts’ behaviour as parasitical as the rubber helps to spin steal and absorb hits successfully. Due to the fusion wheels heavy weight and ability to absorb hits successfully with low recoil, it can be utilized in top tier Defence customs such as Martian GB145/RA160 CS/RSF. However, as rubber produces high friction and can tear easily, the fusion wheel can receive heavy physical damage and the rubber can wear down easily and if used against thin fusion wheels such as Flame, it has high chances of being torn. So, it is fragile. Also, due to the high amount of friction produced by rubber, it loses quite a lot of stamina when in contact with another fusion wheel while spinning and while wobbling, any contact made with the stadium by the fusion wheel is risky, as there is high friction, predicting a perfect loss. Thus, it has very poor stamina. It is as good as basalt in terms of defence.

Spin Track – Rubber Axis 160 (RA160)

RA160 is the first spin track with the 160 height. The 160 height is quite advantageous for defence types as it provides protection from 85/90/100 based attackers. RA160 is quite thin, with red rubber covering the middle portion. It provides good protection but very poor stamina due to high amount of friction created during contact. It depicts the axis on which Mars spins and the colour red on the rubber represents Mars as Mars is known as the red planet. It is great in unison with Martian as it exposes all the rubber on the Martian fusion wheel and itself.

Performance tip – Cross Orbit (CO)

Cross Orbit has the form of a ball tip but is shaped two be like to orbits overlapping each other. Due to being made of metal, it has very little friction on the stadium floor. Also, the contact area is about the contact area of MS and so, the amount of friction produced is even lesser. The gaps in between the orbits help CO to have slight defensive capabilities but it excels in stamina. Due to the ball like shape, it doesn’t have much balance problems. It outclasses WD in terms of stamina but is not better than EWD/PD. For defence, it is outclassed even by B.

Overall - Martian and RA160 are great together and provide great defence. CO is great for stamina and is a top tier stamina bottom. Martian wears down quickly and is fragile and for this reason, everybody should own multiples of this bey blade.
[<Insert "/Spoiler" Here]

---

Trailblazer Vesperius G:D

FACE

Spoiler (Click to View)

[Image: bey_trailblazerVesperius_face.png]
The face depicts Vesper, the evening star. Vesper is also known as the Evening Star, Hesperus, or the planet Venus. The design is loosely based on the game Tales of Vesperia and 00 Quanta from Gundam 00. Somehow it unintentionally ended up looking like DX Gundam.

CLEAR WHEEL - Vesperius

Spoiler (Click to View)

[Image: bey_trailblazerVesperius_clear.png]
The clear wheel depicts the points of a star and rays of light. The sticker depicts Venus' path over a background showing a star forming.

METAL WHEEL - Trailblazer

Spoiler (Click to View)

PC Frame:
[Image: bey_trailblazerVesperius_pc.png]

Metal Wheel:
[Image: bey_trailblazerVesperius_metal.png]
[Image: bey_trailblazerVesperius_top2.png]
The metal wheel and PC frame have stylized flames and stars. The metal wheel has a slope for upper attack. As shown in the picture, turn the PC frame upside down to change between stamina mode and upper attack mode. When put into upper attack mode, the star designs from the PC frame and the metal wheel overlap.

Top View:

Spoiler (Click to View)

[Image: bey_trailblazerVesperius_top.png]
Overall Trailblazer Vesperius is purple+magenta because those fit the "evening star" theme.

4D BOTTOM - Generator Drive

Spoiler (Click to View)

[Image: bey_trailblazerVesperius_drive.png]
The bottom has a gyroscope, which also spins like a generator. The gyroscope is mostly hollow but still gives the beyblade continuous stability. It has a mechanism where the gyroscope starts out locked. When the beyblade hits the ground, the mechanism causes the gyroscope part to unlock and allows the gyroscope to spin freely. This allows the spin from the launch to apply to the gyroscope when you launch the beyblade while also allowing the gyroscope to spin freely while in battle. The purple buttons let you reset the mechanism. The tip on the bottom is like wide defense and is plastic.

---

XILLIA

Wow, I really hope I can have my entry up soon. Not the best one but ehh, might as well post something rather than nothing I'm working on something called Colossal Capricorne S (Spring Drive) I suck at drawing CW's.
Seriously.

AsbelLhant

Amazing.

---

How do I still have 17th most posts here...?

Trailblazer Vesperius G

FACE

Spoiler (Click to View)

[Image: bey_trailblazerVesperius_face.png]
The face depicts Vesper, the evening star. Vesper is also known as the Evening Star, Hesperus, or the planet Venus. The design is loosely based on the game Tales of Vesperia and 00 Quanta from Gundam 00. Somehow it unintentionally ended up looking like DX Gundam.

CLEAR WHEEL - Vesperius

Spoiler (Click to View)

[Image: bey_trailblazerVesperius_clear.png]
The clear wheel depicts the points of a star and rays of light. The sticker depicts Venus' path over a background showing a star forming.

METAL WHEEL - Trailblazer

Spoiler (Click to View)

PC Frame:
[Image: bey_trailblazerVesperius_pc.png]

Metal Wheel:
[Image: bey_trailblazerVesperius_metal.png]
[Image: bey_trailblazerVesperius_top2.png]
The metal wheel and PC frame have stylized flames and stars. The metal wheel has a slope for upper attack. As shown in the picture, turn the PC frame upside down to change between stamina mode and upper attack mode. When put into upper attack mode, the star designs from the PC frame and the metal wheel overlap.

Top View:

Spoiler (Click to View)

[Image: bey_trailblazerVesperius_top.png]
Overall Trailblazer Vesperius is purple+magenta because those fit the "evening star" theme.

4D BOTTOM - Generator Drive

Spoiler (Click to View)

[Image: bey_trailblazerVesperius_drive.png]
The bottom has a gyroscope, which also spins like a generator. The gyroscope is mostly hollow but still gives the beyblade continuous stability. It has a mechanism where the gyroscope starts out locked. When the beyblade hits the ground, the mechanism causes the gyroscope part to unlock and allows the gyroscope to spin freely. This allows the spin from the launch to apply to the gyroscope when you launch the beyblade while also allowing the gyroscope to spin freely while in battle. The purple buttons let you reset the mechanism. The tip on the bottom is like wide defense and is plastic.

hhm, it's good and all, but vesperius reminds me of byxis alot, and I can't see the metal wheel working, it looks far too round.

---

Trailblazer Vesperius G

FACE

Spoiler (Click to View)

[Image: bey_trailblazerVesperius_face.png]
The face depicts Vesper, the evening star. Vesper is also known as the Evening Star, Hesperus, or the planet Venus. The design is loosely based on the game Tales of Vesperia and 00 Quanta from Gundam 00. Somehow it unintentionally ended up looking like DX Gundam.

CLEAR WHEEL - Vesperius

Spoiler (Click to View)

[Image: bey_trailblazerVesperius_clear.png]
The clear wheel depicts the points of a star and rays of light. The sticker depicts Venus' path over a background showing a star forming.

METAL WHEEL - Trailblazer

Spoiler (Click to View)

PC Frame:
[Image: bey_trailblazerVesperius_pc.png]

Metal Wheel:
[Image: bey_trailblazerVesperius_metal.png]
[Image: bey_trailblazerVesperius_top2.png]
The metal wheel and PC frame have stylized flames and stars. The metal wheel has a slope for upper attack. As shown in the picture, turn the PC frame upside down to change between stamina mode and upper attack mode. When put into upper attack mode, the star designs from the PC frame and the metal wheel overlap.

Top View:

Spoiler (Click to View)

[Image: bey_trailblazerVesperius_top.png]
Overall Trailblazer Vesperius is purple+magenta because those fit the "evening star" theme.

4D BOTTOM - Generator Drive

Spoiler (Click to View)

[Image: bey_trailblazerVesperius_drive.png]
The bottom has a gyroscope, which also spins like a generator. The gyroscope is mostly hollow but still gives the beyblade continuous stability. It has a mechanism where the gyroscope starts out locked. When the beyblade hits the ground, the mechanism causes the gyroscope part to unlock and allows the gyroscope to spin freely. This allows the spin from the launch to apply to the gyroscope when you launch the beyblade while also allowing the gyroscope to spin freely while in battle. The purple buttons let you reset the mechanism. The tip on the bottom is like wide defense and is plastic.

lol. oh wow... my chances of placing just got slimmer. very well drawn. i gotta admit, urs is better than mine. lol

---

"I don't care about winning, losing, or getting the prize. All i care about is winning my place in the rankings fair and square." - Sky Prince (me)

.... you could probably get an experienced host to start hosting there. or find a well experienced blader to start hosting. the hosts of tournaments were not "born with the experience" and placed in a random state. someone has to step up! that goes for anyone IN ANY STATE/COUNTRY!

Is it just me or does trailblazer look a lot like scythe?

---

<-SDC
Team Omega Nova!Poke-Fusion Lab!My story

Is it just me or does trailblazer look a lot like scythe?

Top-down it does resemble it, but the PC and actual shape/contours of the wheel are quite different.

---

Some manner of Octopus.

Is it just me or does trailblazer look a lot like scythe?

Top-down it does resemble it, but the PC and actual shape/contours of the wheel are quite different.

umm no... first of all, do not pair shape and contours together. they're different.
and second, the shape is the same (almost a perfect circle) but yes, the contour is different... however making a beyblade similar to scythe or any other blade can GREATLY affect the chances of winning... MAIN THING of this contest is originality.... changing the contours doesn't count as being original... u can't "take someone's test paper, erase their name, place your name, change some answers to make it seem like your work, then call it your own". i'm not saying that's what he did... i'm just saying if it's similar to scythe, then that's gonna be a bit of an issue... we had someone a few pages back who made an entry that was VERYYYYY similar to beat lynx's metal wheel.... he wasn't disqualified but i'm pretty sure the chances are low because of the lack of originality with the entry....

[*] Originality: Try to think outside of the box and use ideas that haven't been used in Beyblade yet!

---

"I don't care about winning, losing, or getting the prize. All i care about is winning my place in the rankings fair and square." - Sky Prince (me)

.... you could probably get an experienced host to start hosting there. or find a well experienced blader to start hosting. the hosts of tournaments were not "born with the experience" and placed in a random state. someone has to step up! that goes for anyone IN ANY STATE/COUNTRY!

Are you going to post yours yet Sky Prince? It is the 13th and it ends tomorrow so it is practically last minute. (Sorry if off-topic but I believe it is relevant to the thread).

---

<-SDC
Team Omega Nova!Poke-Fusion Lab!My story

Are you going to post yours yet Sky Prince? It is the 13th and it ends tomorrow so it is practically last minute. (Sorry if off-topic but I believe it is relevant to the thread).

lol. i have it done with the description and everything, i just want to wait til tomorrow. all i have to click is the "Post reply" button. >:3 i'll post it Wednesday night (it'll probably be 10 pm PST. plus, i won't forget, i've been thinking about posting my entry all week but i wanted to wait.) :3 i have my PST Clock open just in case. =)

---

"I don't care about winning, losing, or getting the prize. All i care about is winning my place in the rankings fair and square." - Sky Prince (me)

.... you could probably get an experienced host to start hosting there. or find a well experienced blader to start hosting. the hosts of tournaments were not "born with the experience" and placed in a random state. someone has to step up! that goes for anyone IN ANY STATE/COUNTRY!

I am just going to post the link to the picture because I have tried to give a private message to some people with the [img] thing and they can`t see a picture, it seems that some other people have done that so, can I?
I hope this hasn`t been answered before.

---

(by the way my name used to be rockleone40000)
I like Defense and stamina types. My favourite is Defense

I am just going to post the link to the picture because I have tried to give a private message to some people with the [img] thing and they can`t see a picture, it seems that some other people have done that so, can I?
I hope this hasn`t been answered before.

a link is acceptable. but to help ur [img] issue, did u make sure u typed it in like this:
[img] the image url [/img]
because of not, then maybe that's why.....
but if it still doesn't work, u can just put a link to the picture. just remember to put a description of the beyblade along with your image.

---

"I don't care about winning, losing, or getting the prize. All i care about is winning my place in the rankings fair and square." - Sky Prince (me)

.... you could probably get an experienced host to start hosting there. or find a well experienced blader to start hosting. the hosts of tournaments were not "born with the experience" and placed in a random state. someone has to step up! that goes for anyone IN ANY STATE/COUNTRY!

My entry
Wonder UFO S230 XWD
Face: UFO
http://s1091.photobucket.com/albums/i396...I_0020.jpg
The face depicts a UFO one of the many unknown objects in the sky.
Clear wheel: UFO (Unidentified Flying Object)
http://s1091.photobucket.com/albums/i396...I_0021.jpg
The UFO clear wheel is a purple transparent colour that is shaped like the dome of a flying saucer. It has screw shaped patterns on it and is perfectly round.
Wheel: Wonder
http://s1091.photobucket.com/albums/i396...I_0022.jpg
http://s1091.photobucket.com/albums/i396...I_0029.jpg
The wheel wonder is perfectly round like the clear wheel UFO and is shaped like an upside down saucer, which is what a flying saucer would look like generally. Wonder is very thin and as a result is very light.
Track: S230
http://s1091.photobucket.com/albums/i396...I_0023.jpg
How it works:
http://s1091.photobucket.com/albums/i396...I_0025.jpg
S230, or Suspension230 is a bright yellow colour that is shaped like an upside down 230, only wider. There is an image of a human being abducted by the UFO which is why the track looks like a beam of light. Suspension 230 has springs on it, which makes the bottom of the track where the tip is placed, spring and can bounce up and down. Although it is not mean to work like M145 by bouncing but, it does make the tip able to move from side to side.
Bottom/tip: XWD (eXtreme Wide Defense)
http://s1091.photobucket.com/albums/i396...I_0024.jpg
Extreme wide defense is basically a wider version of WD. Although since it is wider than the bit that is used to screw it onto the track, it comes with two parts:
How it works:
http://s1091.photobucket.com/albums/i396...I_0026.jpg
XWD, like SW145 has two parts that can be clicked together into place.
To put the tip on, the first part, is screwed on normally, and then the second part is clicked into place.

---

(by the way my name used to be rockleone40000)
I like Defense and stamina types. My favourite is Defense

So here is my entry

Crystalis Pluto M:A
number: BB-150
type: Stamina
reason: Takes the longest to orbit the sun

Face: Pluto

Spoiler (Click to View)

[Image: IMG_8371.jpg]

The Face Despicts The God Pluto ( this is just like the other 4-D solar system beys)
the Face shows a War/Gladiator like Mask which is what Pluto would have worn to war
it also has the mask wearing the Cap of Invisability
which helped Pluto to sneak around
the 2 letters P and O stand for PlutO

Clear Wheel: Pluto
weight: 2.94 G

Spoiler (Click to View)

[Image: IMG_8377.jpg]

The Shape of the Clear Wheel represents Ice Shards, to represent the temperature on Pluto, Ice Cold. the Colour is Black to show the colour of pluto that is seen with the naked eye
there are 2 stickers which have the writing "PLUTO"
like any 4D CW, it has Iron Powder, however the effect is negligible
The Pluto CW has no uses in Attack,Stamina or Defense
however is used with its Generic Metal Wheel

4D Metal Wheel
Crystalis

PC Frame
Weight:1.67

Spoiler (Click to View)

[Image: IMG_8378.jpg]

The PC frame Despicts 2 Crystals, the colour is a Slightly Dark Blue
the PC frame can be turned to put the MW Crystalis in 1 of the two modes (Stamina and Attack)
it is obviously made of PolyCarbonate

4-D Metal Wheel
Weight:37.56

Spoiler (Click to View)

[Image: IMG_8379.jpg]

The Metal Wheel Despicts the icy surface of Pluto
it is painted a Cyan/Light Teal colour
the metal wheel has 2 Major Contact points which are revealed when the PC frame is over the 2 Larger diamonds
the wheel Has Little recoil when in Stamina Mode
however is still overshadowd by Earth, Basalt and Scythe
however is still useful if over options are not available
it has also some uses in Attack

Change Mode : Attack And Stamina

Spoiler (Click to View)

[Image: IMG_8380.jpg]

Stamina:
The PC Frame Covers the gap and reveals the 2 flat Diamonds to make the wheels Closely Circuler
In this mode it has little Recoil

Attack:
The PC frame reveals the 2 wide gaps which have Major Recoil and also Cover the 2 Flat diamonds, the PC Frame Slightly Reach out that the actual PC frame will slightly hit the over MW, causing somewhat Recoil
the MW can be used in attack Customs when Other Wheels Are Unavalible

Used in Stamina Custom
when the PC Frame covers the 2 gaps, it can be used in stamina customs when other Wheels Are Unavalible in the combo
Crystalis Pluto/Aquario AD145/85/230/TH170 WD/EDS/M:A ( Stamina Mode)
due to little recoil

Used in Attack Customs
when the 2 wide Gaps are Open the MW Crystalis can be used when other MW are not unavailable in the combo Crystalis Pluto CH120/S130/R145 RF/R2F/MF/XF (Attack Mode)
even if this is some what outclassed
it still provides the results needed

4-D Bottom
M:A (Metal : Absorber)
weight: 12.8 g

Spoiler (Click to View)

[Image: IMG_8381.jpg]

The 4D bottom Stands for Metal Absorber
a recent found theory Suggests that WD loses more spin than D or SD
when the WD starts wobbling, besides the fact it has more spin time
This Gets Rid of the problem
At First when the Bey Is shot
the 2 tabs on the Bottom push out due to centrifuge
a MWD (Metal Wide Defense) bottom is ejected which spins for a high spin time
however when the bey starts to lose centrifuge and gets to the point where WD is wobbling
the sides of the MWD are Retraced Revealing a MD (Metal Defense)
at the same time when the tabs are pushed in Due to centrifuge
2 wide rubber protrusions Pop out slightly Farther than the MW
which help with Spin Equalizing
Both Tips Are viable in stamina , both MWD and MD
however due to the Fixed Height and the Rubber Actually Under the MW
it has its Disadvantages
however it effectively works on LTS/D/AC and has the Highest Spin Time without Balance Issues.

this also Represents Pluto due to the fact Pluto takes the longest to orbit the sun
just like stamina spin for a long time

Used in Stamina Customs
Even though the Fix height and Rubber under MW
it still has 2 of the best Stamina tips
can be used in the combo Earth/Basalt Aquario/Bull M:A

Full Bey : in stamina Mode
Top View

Spoiler (Click to View)

[Image: IMG_8383.jpg]

Side View

Spoiler (Click to View)

[Image: IMG_8384.jpg]

The Bey itself has its disadvantages. However, it comes with the Best Stamina Bottom which can Equalize Effictiantly against Low Customs
and the MW can be used when other MW wheels are not abvalible for both Attack and Stamina
For Stamina alone, Every Blader Should Atleast Own One Of This Beyblade



meh it was an alright effort
i hope it gets somewhere
hopes u like

edit: MAN JUST REALIZED HOW LONG THIS IS LOL

[Image: snapshot201109136.jpg]
Face 1 grams Blackhole
represents a black hole, space-time distortion

Clear 5 grams Blackhole
the clear presents irregularities smash and attack

Metal whell Vortex
The metal wheel has upper and attack characteristics.
is very heavy (35 grams)

Track AV145 (Vortex attack)4 grams
REJECTING THE ATTACKS ENEMIES WITH POWERFUL FORCE OF 4 BLADES

Bottom XRF 2 GRAMS
A VERY LARGEST FLAT RUBBER (MORE DIAMETER)
OPTIMUM AND POWERFUL OF ATTACK

Maximum ultimate Attack type