World Beyblade Organization by Fighting Spirits Inc. Beyblade Discussion Beyblade Wiki Approved Drafts

Beywiki Photo thread

Feb. 19, 2012  2:16 AM
 
In that picture, yes, but I managed to make my ugly Dark Metal Wheel look good enough for BeyWiki, so see what you can do with different light angles and stuff.

Of course you could polish it if you choose, then it'd probably be fine.
Feb. 19, 2012  2:26 AM
 
(Feb. 19, 2012  2:16 AM)Shabalabadoo Wrote: In that picture, yes, but I managed to make my ugly Dark Metal Wheel look good enough for BeyWiki, so see what you can do with different light angles and stuff.

Of course you could polish it if you choose, then it'd probably be fine.

Hmm, I'll see what I can do! Hopefully I can get something to work.
Feb. 22, 2012  2:47 AM
 
Great job on everything once again, Nocto.

(Feb. 18, 2012  2:45 AM)Nocto Wrote: I think this deserves its own section, or a note, in the article as it has a different handle, which is not customizable.
Sonokong HMS (customize) Neo Grip (Click to View)
Also, I'm guessing it was only a door left open to eventually release more accessories, but is there any use whatsoever to the slot on the grip head, similar to the one for the Spring Support of Plastics Customize Grips?

It definitely does. I actually just found out about this grip within the last few weeks, somehow! I don't know anything about it. Is it easier to find now than the Takara Neo Customize Grip?
Feb. 22, 2012  3:08 AM
 
It's on Ebay in a set with draciel Ms and Gaia dragoon Ms. So significantly easier, yes.
Feb. 22, 2012  4:16 AM
 
And cheaper.

Anyway, here's my draft for it:
Quote:The Sonokong release of the Neo Customize Grip features a grooved handle instead of the original cylindrical handle from Takara. Due to this difference in shape, the handle cannot be fitted with the Grip Rubber. The slot for the Spring Trigger was also removed, meaning the handle is unable to be customized in any way. The top part remains identical however, and the Grip itself can still be used in either right-handed or left-handed positions.


Some stickers are beaten up, and I had to glue back the points on the "G" stickers, but it should do.
Dranzer GT

Edit: Also, should I add the recolored Flash Sagittario picture, or would you rather keep the original?
Feb. 22, 2012  4:44 AM
 
Ah, yes, I forgot that I wanted to add your recoloured Flash Sagittario image. Go ahead and replace it.
Feb. 22, 2012  4:55 AM
 
(Feb. 22, 2012  4:16 AM)Nocto Wrote: And cheaper.

Anyway, here's my draft for it:
Quote:The Sonokong release of the Neo Customize Grip features a grooved handle instead of the original cylindrical handle from Takara. Due to this difference in shape, the handle cannot be fitted with the Grip Rubber. The slot for the Spring Trigger was also removed, meaning the handle is unable to be customized in any way. The top part remains identical however, and the Grip itself can still be used in either right-handed or left-handed positions.


Some stickers are beaten up, and I had to glue back the points on the "G" stickers, but it should do.
Dranzer GT

Edit: Also, should I add the recolored Flash Sagittario picture, or would you rather keep the original?

Excellent work on the draft, I can't really find anything wrong.

Thanks very much for the Dranzer GT pictures, the draft is ready for checking and those pictures are, as always, excellent, and will make a great addition to the article once it goes up :3
Mar. 04, 2012  3:23 PM
 
since i've plenty time tonight..so..(i dont know if it is good enough)
well..i dont know if they are usable..some pice i took more
Mar. 04, 2012  5:21 PM
 
Benjohadi, you need more light, or you need to adjust the exposure on your camera.

---------------------------

Dranzer V2

RBA5 Dranzer MF (Orange)
Mar. 04, 2012  11:20 PM
 

The Giraffe is the Hasbro Version.
So are these okay for BeyWiki?
Mar. 04, 2012  11:29 PM
 
The 6th and 8th in the Beat Lynx set are kind of blurry in the back; might want to retake those. The rest are fine, though.
If Kei is okay with it, I'll add them to the Beat Lynx article.
Mar. 04, 2012  11:50 PM
 
Those pictures were meant to show the details on the sides, so I think it's all right. My camera didn't let me focus the entire image.
Mar. 05, 2012  4:53 AM
 
(Mar. 04, 2012  5:21 PM)Nocto Wrote: Benjohadi, you need more light, or you need to adjust the exposure on your camera.

---------------------------

Dranzer V2

RBA5 Dranzer MF (Orange)
which photo nocto?i think some of them are usable..i took them really under the light..haha
Mar. 05, 2012  1:34 PM
 
Many of them, mostly top view and bottom views.

They're not unusable, but more light wouldn't hurt them, and if you had enough light, then exposure is most likely the problem. It's a common problem when working on very light colored surfaces, try fiddling with your camera and raise your exposure a couple notches.

Also, I can see that some of them are somewhat grainy, try to lower your ISO and see if you can still take pictures without delay, it might help.
Mar. 05, 2012  3:42 PM
 
I checked the thread and there is none but I made an attempt to take Photos of Driger F for the Driger F article


Feedback please Cute

Mar. 06, 2012  2:02 AM
 
The shadow is on the side of viewing, but they seem good to me!
Mar. 06, 2012  9:50 PM
 
Those images are definitely quite acceptable.
Mar. 07, 2012  2:48 AM
 
Neko could you take some more photos of the blade base and the dissembled spin gear, since those are the most unique parts of Driger F and it might give people a better idea of how the clutch works?
Mar. 07, 2012  11:34 AM
 
Vulcan - Here they are in the spoiler Smile

Kaizer posted Driger G, but the images were too dark and blurry so here is my attempt (and mine is in Mint condition)

Driger G
Mar. 07, 2012  1:45 PM
 
Very nice, Neko!
All those pictures are very nice, at least in my opinion. Smile
But I still see too much shadow in Driger F's side view. Still, it does look nice.

Also, the side view of Driger G-
Don't you think that you must try to show the whole contact point, so that people get a good idea of its slopes? Also, it is too close to your lens, IMO. If it could be placed a 'little' further, just as in your Driger F side view pic?

Just my suggestions, not sure if they are true/required. Tongue_out
Mar. 07, 2012  2:16 PM
 
(Mar. 07, 2012  1:45 PM)Janstarblast Wrote: Very nice, Neko!
All those pictures are very nice, at least in my opinion. Smile
But I still see too much shadow in Driger F's side view. Still, it does look nice.

Also, the side view of Driger G-
Don't you think that you must try to show the whole contact point, so that people get a good idea of its slopes? Also, it is too close to your lens, IMO. If it could be placed a 'little' further, just as in your Driger F side view pic?

Just my suggestions, not sure if they are true/required. Tongue_out
Thanks for the feedback. Yeah, I put the camera too close

Here's my 2nd and 3rd side attempt on the 2 beys, uploaded it onto my other flickr account

Driger G

Driger F

Deleted my other side images so the mods don't get confused on which side view to use XD
Mar. 07, 2012  2:27 PM
 
Beautiful! Now those are better than the ones before!
Very nice, Neko Fury! Grin

I am actually more overwhelmed to know that my(someone who has no real sense of good photography) suggestions weren't wrong, at the least. XD
Mar. 07, 2012  3:03 PM
 
Thanks that the photos look better now.
It looks like the Driger F article looks good to go now :3

Driger G's draft on the other hand...the photos are good to go but the draft is so very incomplete :\
Mar. 08, 2012  2:46 PM
 
It's on my to do list, haha, I've just been very busy getting back to work lately (and beywiki ain't my responsibility, so it gets a lower priority). So close to finishing burning kerberous/ariel 2, but just haven't been able to get my head in the right frame of mind for writing lately :c
Mar. 08, 2012  7:48 PM
 
Benjohadi: In addition to what Nocto said, a lot of them are not shot tightly enough, and are blurry as well.

Nocto: instant accept for the Dranzer V2/Dranzer MF images haha

Neko Fury: Great images! Just make sure they are 800 x 600 rather than 640 x 480 whenever they get uploaded to the wiki.

(Mar. 04, 2012  11:29 PM)Primal Wrote: The 6th and 8th in the Beat Lynx set are kind of blurry in the back; might want to retake those. The rest are fine, though.
If Kei is okay with it, I'll add them to the Beat Lynx article.

Yeah, the DOF on this one is a bit too intense: http://img23.imageshack.us/img23/940/img6577a.jpg

But the rest are great!
Prev
Page 15
Next