I've had missed a lot of important gaps regarding this in its early stages

Re-Introducing the Micro Disk System as the NanoGene System

What in the heck is a 'NanoGene'?

• Smallest Beyblade system to date
  
• All Metal, Five Layer Design
  
• Inspired by the compact, metal Beigoma
  
• Engine launchers with pivoting grips diversify your game
  

Essentially, I've had problems with making such a small top system with any part being plastic at all. I needed to use an all-metal design for any such metagame to exist within the tops themselves.

Breakdown of Parts

(All parts are constructed of a clean, heavy steel)

#1. Glyph Lock - Spirit Motif, Main Point of Construction
#2. Nano Gear - Attack Part, comes in three classes
>Power, Unique patterns on a predominantly round surface
>Clash, recoil focused, simpler shapes (Septagon, Octagon, Nonagon, etc...)
>Target, completely round circles of varying density
#3. Armor - the 'base' and weight of NanoGene System Beyblades
#4. Cylinder - Height Track
#5. Nano Tip

Bearing-Lock System

Instead of bolts and screws, the NanoGene System uses tiny ball bearings in suspension for secure, tight assembly with little rattle.


~*~Assembly Process~*~

-1- Attach Glyph Lock with tabs aligned, onto the magnetic holding tool
-2- Lip side down, attach Nano Gear with its four bearings aligned
-3- Slide Armor over the Glyph Lock's stem, grooves below Nano Gear and on top Armor aligned
-4- Finally insert Cylinder with the selected tip into Glyph Lock's center shaft


Visual Diagram

Spoiler (Click to View)

[Image: beyblade_nanogene_series_and_system_asse...5naau1.png]

Essentially, you get a top which looks like this... But modern, with multiple parts

Spoiler (Click to View)

[Image: t11_06.jpg]

Hard Lock Assembler Case

All in one super-compact device capable of secure storage, locking, and push-assembling of your NanoGene top. Design in progress.

Engine Launcher + Pivot-Angle Grip

Ergonomic, durable, compact engine based launcher, uses break-proof winder tool. Design in Progress.

Grip with adjustable pivot for unique launching angles.

Super Portable Stadium

Based on the Zero-G architecture, customizable surface and base. Design in Progress.

Yes I know, this is all pretty tech-hearty stuff. This is supposed to be a touch more mature than the past series... Hopefully it turns out that way.

Update: Actually, one major design update was to make the weight core and "armor" one piece. I'm stupid.

This actually sounds quite neat! Could we expect a diagram showing the parts sometime?

Edit: Is there a naming system for parts?

The naming system is far simpler, using only one Abbreviation for assigned to the NanoGear.

For instance:

Power: Cognitive Xenoceros
Clash: 7S (Seven Side) Xenoceros
Target: WBBA

EDIT: Here it is~

Spoiler (Click to View)

[Image: beyblade_nanogene_series_and_system_asse...5naau1.png]

Aha, thanks for the diagram! Can you try remaking Macroshell 8S into a Nanogene?

Cool, i remember you giving me the link to the wiki page for this a long time ago. I always thought it was a cool idea. Also, if you need help with designs and stuff like that, i could be of assistance

---

still posi

Yeah, some naming has altered so Macroshell is now "Kingshell", more widely appealing. :3

Name: Kingshell 8S
Type: Balance
Product Code: BNG-##
This Beyblade was released as the prize Beyblade in Nanogene Random Booster Vol. 1 (BNG-##)

Glyph Lock: Kingshell
This Glyph Lock depicts a King Crab.

Nano Gear (Clash Type): Kingshell 8S
An 8-sided Nano Gear with embedded designs of crab claws.

Armor: Height Changer
An Armor with two parts, working together as a lock, similar to the MFB Track CH120.
Note: This armor can be used with other cylinders, but the height-change feature will not work.

Cylinder: [unknownheight]/[unknownheight]
This Cylinder has two pairs of notches on it that lets it work with the locking function of the Height Changer Armor. It can change between two heights with that Armor
Note: This is the only cylinder that can be used with the Height Changer Armor, still having the Armor's gimmick. Height Changer is the only Armor that may be used with this Cylinder.

Nano Tip: Semi-Flat
A tip that resembles a Flat Tip with rounded edges. It has a calmer and slower movement pattern compared to a Flat Nano Tip.

Next up: HellBalancer (Libra)!
--------------------------------------------------------------------------------------------------------------------------------------------
Edit:
Name: HellBalancer
Type: Stamina/Endurance
Product Code: BNG-##

Glyph Lock: HellBalancer
This Glyph Lock depicts Libra, the Scales.

Nano Gear (Target Type): HellBalancer
A mostly round Nano Gear with the design of Scales, similar to MFB's Libra Clear Wheel.

Armor: Wide Funnel
A mostly basic Armor with almost no designs on it. It is a bit wider in shape compared to most Armor, helping give the Beyblade outer weight distribution.

Cylinder: Rotator [unknown height]
The top of this Cylinder, like usual, attaches into the Glyph Lock. Everything going down from the part that attaches to the Glyph Lock spins freely, a gimmick similar to the F230 Track.

Nano Tip: Sharp
A spike-shaped tip.

Actually the basic polygons are what make the "Clash" type gears. But that isn't bad.

[Major Update on Nanogear class design traits]

Power

Circular shape, with textured patterns creating their own unique effects in combating against opponents. Some are based on repeating shape textures, granular textures, even symbol and text based on a completely circular diameter.

Clash

Entirely simple, to the point flat shapes. The common secondary designs. While they do have smash, they are entirely luck based competitive parts which don't fight exactly like the Power types. Clash Nanogears are used on lesser Beyblades in the series; Beyblade Microcosm.

WBBA

Completely blank weight designs with smooth diameter, these are meant for the Suicide Challenger Knockout tops and come in various densities.

I'd hate to double post but this is important for anyone wanting to know what the main focus for certain parts is.

Cylinder: Height and Height only

It is available, and will only be available in three different heights. Because the NanoGene system is so compact,
the height is very simple.

HIGH, MEDIUM, and LOW

Nano Tip; Density, Shape, and Textures

No rubber, or plastics will be used. Different metals may be used but the other important differences are in shape and texture.

Example: Matte Sharp is the typical inert, dense steel but with a satin like coating

Man, this just seems that good... Seriously. Hyperbole apart, this could be official =p

Couldn't resist to ask, is this system workable with something similar with the Accessories used on the plastic saga? I could see some interesting ideas, but that would meddle with piece diameter.

... That Ginga.

---

I'm rare to find online, be warned. Yet, I've got a better avatar now! u_u

Keep your way, by your strength. Not at anyone's cost or fall. It's your way, as much as it's easier to repeat this very phrase than making it. At all.

I'm not planning on making anything cross compatible, but the ambitious design (Size of traditional beigomas, even closer to shape) should provide fun, casual, absolutely illegal activities (as in Tournament standards...)

I should also mention for update that Armor comes in a variety of classes, currently very early in development, bearing free-spin armor.... Essentially; "eternal gimmick"...

Yeap, Ginga in Creepypasta town....

Ehh... Well, I wasn't really speaking of cross-compatibility, but rather a proper gimmick system for the NanoGene... But, hey, those Eternal Armor series make promise. (I wonder, these things are, like, a inch long?)

Sorry if I get overreact a bit, it's the first time I see a custom system taken seriously. That, and I'm trying to gather some ideas for Z-G Kerbalt... (I'm trying to do something TT-alike. HARD.)

OFF:... Now we need Kenta w/ link-visiting-ill-ganon face.

---

I'm rare to find online, be warned. Yet, I've got a better avatar now! u_u

Keep your way, by your strength. Not at anyone's cost or fall. It's your way, as much as it's easier to repeat this very phrase than making it. At all.

Sorry for the lack of news the past week - parents are not being decent with one another.

I should note to those unaware of this concepts earlier stages, it's focused entirely around a philosophy of which, a metagame with far more compact focus that appeals to all types of players.

I should add that there IS work being done here but it's being well seasoned before I give a legitimate update. I'm trying to experiment with a tilting medium for tops of this size to have decent travel.

The Coin Rock Attack Stadium is the continuation of Zero-G's swaying gimmick to increase travel and performance between these incredibly small fighters

Nanogene Tops are small and often quick at launch, requiring a moving surface. You can also customize the weight distribution for types switching.

Hey... I hope this doens't count as necro, it's less than a month...

Just leaving the question, you've ever considered making this real at some point?
Cuz this seems pretty workable =p

---

I'm rare to find online, be warned. Yet, I've got a better avatar now! u_u

Keep your way, by your strength. Not at anyone's cost or fall. It's your way, as much as it's easier to repeat this very phrase than making it. At all.

This looks really great
At first , I didn't actually realize that the picture of them was actually them XP haha .

Hey... I hope this doens't count as necro, it's less than a month...

Just leaving the question, you've ever considered making this real at some point?
Cuz this seems pretty workable =p

It is but the metagame is gonna be very.... Precise. Since we're working with tops that are literally the size of those ancient steel tops. Also being the first all metal system, I dunno how stainless steel would fare if they could keep it from sparking..... But it needs stuff that's as heavy duty as Home Depot bolts for that size.

I'm going to do the Glyph Lock designs in pixel, wish me luck

lol Good luck then... Whew, it's not so hard at all. Patience is needed more than anything else.

Ah, well, I've thinking about some weird ideas. It's made of metal, but why not cover it with plastic? Like the opposite of the HMS... But yeah, I'm aware it's quite impractical...

Yeah, but possible.

---

I'm rare to find online, be warned. Yet, I've got a better avatar now! u_u

Keep your way, by your strength. Not at anyone's cost or fall. It's your way, as much as it's easier to repeat this very phrase than making it. At all.

I was thinking of implementing a secondary game/arena that uses fixed launchers. Similar to Crossfire (old faceoff style mechanical game)

Can you make me one =)

---

Name : Helios Drago

---

Name: Kingshell 8S
Type: Balance
Product Code: BNG-##
This Beyblade was released as the prize Beyblade in Nanogene Random Booster Vol. 1 (BNG-##)

Glyph Lock: Kingshell
This Glyph Lock depicts a King Crab.

Nano Gear (Clash Type): Kingshell 8S
An 8-sided Nano Gear with embedded designs of crab claws.

Armor: Height Changer
An Armor with two parts, working together as a lock, similar to the MFB Track CH120.
Note: This armor can be used with other cylinders, but the height-change feature will not work.

Cylinder: [unknownheight]/[unknownheight]
This Cylinder has two pairs of notches on it that lets it work with the locking function of the Height Changer Armor. It can change between two heights with that Armor
Note: This is the only cylinder that can be used with the Height Changer Armor, still having the Armor's gimmick. Height Changer is the only Armor that may be used with this Cylinder.

Nano Tip: Semi-Flat
A tip that resembles a Flat Tip with rounded edges. It has a calmer and slower movement pattern compared to a Flat Nano Tip

Name :Helios Drago
Product code :BST.
Glyph Lock : Drago depicts Crimson Chinese Dragon body
Nano gear(Power): Helios Drago/ Rough Edges for flames
Armor:Burst Attack / In 10 seconds armor spins really fast when slows down
Cylinder:Low/For clash speed
Nano: HBF/ Best for barrage attacks
Type:Attack

---

Dragon Warrior Ifinite Fire Crush

This is a neat idea indeed and will consider it, I'm gonna add DragX as the name though to fit stylistic pattern.

Send me a copy

---

Dragon Warrior Ifinite Fire Crush

To be clear, the naming system is meant to pay respects to how plastics were named, which is often exotic to strange. XD

What

---

Dragon Warrior Ifinite Fire Crush

Life caught up and my project has taken many halts, I'm going to be getting a job soon... But the good thing is that basic working skills fuel creative thinking so, expect major updates....