Metal Fusion is part of Metal fight, and shogun steel comes under MFB (Metal fight beyblade). In MFB tournaments, unless it says so, you can use any of these types of bey -
(Got it from beywiki)
Links:
http://wiki.worldbeyblade.org/index.php/...ogun_Steel
http://wiki.worldbeyblade.org/index.php/...t_Beyblade
Metal System -
Face/Face Bolt: Hexagonal screw-like piece that fastens the Beyblade together, similar to Bit Protector from the HMS. They feature graffiti-style illustrations on the top (i.e. Bull, Pegasis, etc). With the introduction of the Hybrid Wheel System also came the Metal Faces, which are 3.5 grams heavier than normal Faces, therefore they help add weight to a Beyblade. From BB-27 through BB-46, Faces are blank, and stickers must be applied to them. Starting from BB-47, Faces became printed again up until BB-105, when they were once again made blank.
Wheel: Main source of attack from a Beyblade; unlike HMS, the Wheel is completely made out of metal to compensate for the lack of a Weight Disk. They use various shaped protrusions to lower the spin velocity of an opponent. The Wheel is fundamentally the same as the Attack Ring from the HMS and plastic Beyblades. The shooter connects directly to the Wheel and does not depend on the Face or the Track for a solid connection. The Wheel determines the spin direction of the Beyblade.
Track/Spin Track: The Track is the component of the Beyblade that connects the Wheel and Bottom. The Track determines the height of the Beyblade. Their names (when read with a decimal before the last digit) determine their height in millimeters. For example, Pegasis' Track is called 105, which stands for 10.5 MM. Some Tracks have gimmicks which help make multiple good customizations since some of them are significantly heavier than others, like Flame Sagittario’s C145 Track.
Bottom/Performance Tip: The bottom of the Beyblade. It has interchangeable tips which the Beyblade spins on. Movement patterns can be altered with the differently shaped tips that can be used. It is similar to the Blade Base from plastic Beyblades or the Running Core from HMS. The Bottom is indicated by the (sometimes two) last letter(s) of a Beyblade’s name: for instance, Capricorne 100HF, where HF is the Bottom and stands for Hole Flat.
Hybrid Wheel system -
In this, it was the metal system, but there was a clear wheel.
Clear Wheel/Energy Ring: Upper part of the Hybrid Wheel which is made of clear polycarbonate, a kind of plastic that is supposed to be more resistant than normal. All plastic parts of a Metal Fight Beyblade are made out of that plastic. Unfortunately, most Clear Wheels rarely get to make a good impact in the game unless there is a significant height difference between two Beyblades; only the L Drago, Perseus and Meteo L Drago Clear Wheel obviously comes into play, as it is wider and that it actually extends to cover the Metal Wheel. However, Clear Wheels are mostly different because of their slight weight variations and the area they cover on the Metal Wheel.
Metal Wheel/Fusion Wheel: As the name indicates, it is basically a thinner metal equivalent of the normal Wheel. The Metal Wheel mostly determines the weight of the Hybrid Wheel, as well as the type of attack of the beyblade because it is usually wider than the Clear Wheel.
Shogun Steel:
Stone Face: Unlike the MFB Faces, Zero-G Faces are diamond-shaped. They connect all the parts of a Beyblade together by screwing into the Track. There are also metal Faces called Metal Stone Face. Stone Faces are approximately 1cm longer than regular MFB Faces, probably to accomodate the Synchrom system. In fact, when Synchrom is achieved, only a Metal Stone Face or a regular Stone Face can be used to screw all the Beyblade's parts together.
Chrome Wheel: Instead of having a plastic ring on top of the Beyblade in order to prevent launcher prongs breakage, the first layer of Zero-G Beyblades is a Chrome Wheel with considerably detailed designs. This is helped by the voluntary decision made by TAKARA-TOMY to design Chrome Wheels that are asymmetrical. One side has fewer interesting details but has a big hole for the "crystal", and the complete rest of the side is free to have all the physical features it wants without being symmetrical.
Crystal Wheel: It is a plastic part that goes underneath the Chrome Wheel, but it can also be flipped and placed on top of the Chrome Wheel in a mode change, or not even flipped. These two modes are called Chrome Up Mode and Crystal Up Mode. Seeing as it barely protrudes from the sides of the latter part, the plastic piece mostly serves aesthetic purposes in the normal mode, notably by filling the hole in the Chrome Wheel and forming the "crystal". On this crystal is engraved an icon of the element the Beyblade represents. For example, Shinobi has Fire.
Track/Spin Track: The Track is the component of the Beyblade that connects the Wheel and Bottom. The Track determines the height of the Beyblade. Their names (when read with a decimal before the last digit) determine their height in millimeters. For example, Pegasis' Track is called 105, which stands for 10.5 MM. Some Tracks have gimmicks which help make multiple good customizations since some of them are significantly heavier than others, like Flame Sagittario’s C145 Track.
Bottom/Performance Tip: The bottom of the Beyblade. It has interchangeable tips which the Beyblade spins on. Movement patterns can be altered with the differently shaped tips that can be used. It is similar to the Blade Base from plastic Beyblades or the Running Core from HMS. The Bottom is indicated by the (sometimes two) last letter(s) of a Beyblade’s name: for instance, Capricorne 100HF, where HF is the Bottom and stands for Hole Flat. Some Zero-G Bottoms incorporate wider elements such as a big plastic ring around them, in CF's case, to help stabilise the Beyblade in these new swaying stadiums.