Ask a question, get an answer! #2

(Jun. 02, 2013  10:31 PM)Ninjablader9 Wrote: OK so first off before I start this discussion I want to let all of the forum admins know that I have not been on in forever (2 years ) so i forgot some of the rules so if i break any i am sorry.

My first question is about tournament legal arenas. I know that #BB-10 is legal but what about #BB-41 and BB-#46 and if you could suggest which would be the best one to buy. Cute

My second question is that are there tournaments specifically set to zero-g beys and their arenas or can they be put into normal tournaments. I think it should be okay to allow the beys but the arena part stumped me.

One more question is that is it legal to host a tournament even if you aren't in possession of a #BB-10 arena. Thanks for reading if you did and I will see everyone later!

1) The best one, definitely, is to buy the BB-10, as it is the only competitive stadium for MFB.

2) The Zero G format tournaments allow, regular MFB Beys made from 2008-onward, but it just has to be in a Zero G Stadium.

Here, read this:


http://worldbeyblade.org/Thread-Introduc...o-G-Format


3) Unless its Zero G format, no, it's illegal, because BB-10 is the only stadium that is allowed for Standard format.

Smile
Well i already did that and i got told the defense combo i use now which is ifraid dragooon w145 wd but then i was told that thats a stamina setup so idk im about to get the dx defense and stamina set and make stuff with that. I know im going to use wyvang dragooon
(Jun. 02, 2013  10:34 PM)LMAO Wrote:
(Jun. 02, 2013  10:31 PM)Ninjablader9 Wrote: OK so first off before I start this discussion I want to let all of the forum admins know that I have not been on in forever (2 years ) so i forgot some of the rules so if i break any i am sorry.

My first question is about tournament legal arenas. I know that #BB-10 is legal but what about #BB-41 and BB-#46 and if you could suggest which would be the best one to buy. Cute

My second question is that are there tournaments specifically set to zero-g beys and their arenas or can they be put into normal tournaments. I think it should be okay to allow the beys but the arena part stumped me.

One more question is that is it legal to host a tournament even if you aren't in possession of a #BB-10 arena. Thanks for reading if you did and I will see everyone later!

1) The best one, definitely, is to buy the BB-10, as it is the only competitive stadium for MFB.

2) The Zero G format tournaments allow, regular MFB Beys made from 2008-onward, but it just has to be in a Zero G Stadium.

Here, read this:


http://worldbeyblade.org/Thread-Introduc...o-G-Format


3) Unless its Zero G format, no, it's illegal, because BB-10 is the only stadium that is allowed for Standard format.

Smile

Thank you so much for your help. I will buy a BB-10 arena ASAP!
LMAO, you are not completely correct though. At least two other stadiums are legal in the Standard format, but the BeyStadium Attack Type is just the best.
http://worldbeyblade.org/universalrules.pdf
(Jun. 03, 2013  3:02 AM)Kai-V Wrote: LMAO, you are not completely correct though. At least two other stadiums are legal in the Standard format, but the BeyStadium Attack Type is just the best.
http://worldbeyblade.org/universalrules.pdf

Oh, my mistake then. I've never actually seen any other stadium other than the BB-10 being used in a tournament, and so I jumped to conclusions, sorry about that.
How much interest is earned for the investment? $20,000 for 2 years at 5% compounded annually

Someone invested $32,000 at 6% interest compounded annually. What will be the total balance at the end of 2 years?
(Jun. 03, 2013  9:24 PM)ryugavskyoya1 Wrote: How much interest is earned for the investment? $20,000 for 2 years at 5% compounded annually

???

This is a Ask A Question topic for Beyblade, not your investments and or homework!
It doesn't say in the rules in the OP is HAS to be for beyblade. I really need help with this one, its sooo hard
(Jun. 03, 2013  9:30 PM)ryugavskyoya1 Wrote: It doesn't say in the rules in the OP is HAS to be for beyblade. I really need help with this one, its sooo hard

Seriously? It's in the Beyblade General part of the site, so obviously, it wouldn't be about Investments, and things like that.

I think you can get some help there, in the Off-Topic forum, just find the right thread.
(Jun. 03, 2013  9:30 PM)ryugavskyoya1 Wrote: It doesn't say in the rules in the OP is HAS to be for beyblade. I really need help with this one, its sooo hard

(May. 31, 2011  4:50 PM)Kai-V Wrote: This is the Ask a question, get an answer! topic. This is for answering quick Beyblade questions that do not need much discussion and therefore, don't require a full topic.
It does say in the op.
Seriously. Ask Yahoo Answers or something. This forum wasn't made to help you with your homework :p
Ah, never mind. Looks like this has already been addressed lol
About 3 years ago i was doing some landscaping, pulling out truckloads of old dead roots. And behold, this old Plastic was buried 2 feet underground, caked in dirt.
http://i514.photobucket.com/albums/t348/...CF2793.jpg

So being retired plastic blader i am, i had to take it apart and give it some TLC.
http://i514.photobucket.com/albums/t348/...CF2790.jpg

So at first i thought this might be a Galzzly, however Ive never seen one in this color, and it has an extra red plastic ring, making it 6 layers? so I'm content to think it might be a custom or something I'm not quite sure?

But what I'm actually wondering about is the spin gear i found inside, its quite strange, on the top i can almost see what looks like an LED inside.
http://i514.photobucket.com/albums/t348/...CF2791.jpg

And on the bottom, what looks like a computer chip of some sort?
http://i514.photobucket.com/albums/t348/...CF2792.jpg

It doesn't have the star shaped bottom that I'm familiar with, and its not a regular spin gear because its quite tall, i cant take it apart, and lacks a R or L on the side, so i cant tell if its a right or left spin so i don't know what launcher machine to buy for it?

i was wondering if someone more knowledgeable than i could please identify my spin gear, or Beyblade?
It's most likely fake, but the AR and Sub AR are definitely Galzzlys. Also, this belongs in the plastics q and a thread I believe.
I apologize, i didn't know if making a new thread for it was appropriate or not, i didn't want to take up a whole thread, ill delete that post and move it to plastics Q and A, thank you.
You can't delete it, but don't worry about it.
And you're welcome.
That sounds like it could be one of those electronic habro plastics
Except those look nothing like the ones in the picture, not can they be fully disassembled...
Oh i cant see most picture on my phone
I just got Cosmic Pegasus and the paper shows Attack mode, Directional attack, Multi attack and Upper attack. Which ones are the same as Big bang pegasus' omni direction, smash attack, upper attack and barrage mode.

For example Barrage mode may be the same as Attack mode. I know that both upper attack modes are probably the same. Thank you for taking your time to answer!
(Jun. 03, 2013  11:45 PM)Ninjablader9 Wrote: I just got Cosmic Pegasus and the paper shows Attack mode, Directional attack, Multi attack and Upper attack. Which ones are the same as Big bang pegasus' omni direction, smash attack, upper attack and barrage mode.

For example Barrage mode may be the same as Attack mode. I know that both upper attack modes are probably the same. Thank you for taking your time to answer!

Are there pictures in the instruction booklet ? Perhaps compare with the images on the Beywiki article for Big Bang Pegasis F:D :
http://wiki.worldbeyblade.org/index.php/...egasis_F:D
(Jun. 03, 2013  9:34 PM)umbrulla Wrote: About 3 years ago i was doing some landscaping, pulling out truckloads of old dead roots. And behold, this old Plastic was buried 2 feet underground, caked in dirt.
http://i514.photobucket.com/albums/t348/...CF2793.jpg

So being retired plastic blader i am, i had to take it apart and give it some TLC.
http://i514.photobucket.com/albums/t348/...CF2790.jpg

So at first i thought this might be a Galzzly, however Ive never seen one in this color, and it has an extra red plastic ring, making it 6 layers? so I'm content to think it might be a custom or something I'm not quite sure?

But what I'm actually wondering about is the spin gear i found inside, its quite strange, on the top i can almost see what looks like an LED inside.
http://i514.photobucket.com/albums/t348/...CF2791.jpg

And on the bottom, what looks like a computer chip of some sort?
http://i514.photobucket.com/albums/t348/...CF2792.jpg

It doesn't have the star shaped bottom that I'm familiar with, and its not a regular spin gear because its quite tall, i cant take it apart, and lacks a R or L on the side, so i cant tell if its a right or left spin so i don't know what launcher machine to buy for it?

i was wondering if someone more knowledgeable than i could please identify my spin gear, or Beyblade?

It's a fake beyblade, that's for sure. It's a Galzzly AR and a pretty poor copy of a Driger S Base, I guess the taller SG required by fitting the LED etc into it left them space for two weight disks so they just jammed them on - with one made of plastic, for whatever reason. Not seen a fake with a gimmick like that before, though, quite interesting. The red part is a fake eight wide, and the actual weight disk is a fake Gyro WD - which were common on a lot of fakes to give them an edge over real beys.
Hey is it normal to get a gb145spin track that has 2sets of balls in it


Note: brand new out of package from Hasbro
If someone can help me, I would like to know, how much worth a nib hasbro flame libra, and also a nib storm aquario.