This thread dead???

This thread dead???

What makes you think this is dead?

---

I'm gonna Ragnawreck ya

This thread dead???

What makes you think this is dead?

A thread is only dead after 2 years I think. (Someone correct me if I'm wrong)

---

Looking for a B-130 Revive Phoenix layer, a B-152 Knockout Odin layer, and an Extreme'. 

Nante doraggu.

So, I decided to waste many hours on turning Pokémon into Sparking Beys. I haven't tested them out yet, so I'll have to post the Tinkercad links for them later.
Pierce Gillgard/Aegislash

Spoiler (Click to View)

Neutral Attack Mode

Focus Attack Mode

This Bey is based on Aegislash, so it naturally has to take inspiration from Achilles. One of the scrapped designs for Union Achilles had a gimmick where you would change the orientation of the Union Sword attachment to change the contact points rather than putting it on or taking it off. I made the overall shape similar to that scrapped design, but also made it different by giving it more of a focus on Aegislash's traits. I initially intended to make a Blade Mode and a Shield Mode, but both orientations are a bit too aggressive, so I just named both modes after the weight distribution. A fun "stock" combo for it can be Pierce Gillgard 1' Hit Ultimate Reboot'.

Toxin Agoyon/Naganadel

Spoiler (Click to View)

Wing Mode

Stinger Mode

Ultra Stinger Mode

This Bey is based on the Ultra Beast Naganadel, which is an Ultra Beast and a Dragon Type, so I decided to make it Left-Spin. It turned out to seem more like a Balance Type than the Attack Type that I originally intended because of the reserved contact points and similarities to Tact. The gimmick is reliant on the inner ring's orientation. Wing Mode is when the spikes are aligned with the big wings on the Ring, effectively doing nothing aside from forcing you to use the part in order to make it "legal". Stinger Mode is when the spikes are exposed. This mode allows the ring to rotate and parry attacks. The last mode is Ultra Stinger Mode, which requires a different attachment. This mode doesn't allow the inner ring to rotate, but makes the contact points slightly more aggressive. A fun "stock" combo for it can be Toxin Agoyon 7 Reach Trans'.

One thing is I’m wondering is that these look like they use the sparking system so I wanted to know which chassis they both use

So, I decided to waste many hours on turning Pokémon into Sparking Beys. I haven't tested them out yet, so I'll have to post the Tinkercad links for them later.
Pierce Gillgard/Aegislash

Spoiler (Click to View)

Neutral Attack Mode

Focus Attack Mode

This Bey is based on Aegislash, so it naturally has to take inspiration from Achilles. One of the scrapped designs for Union Achilles had a gimmick where you would change the orientation of the Union Sword attachment to change the contact points rather than putting it on or taking it off. I made the overall shape similar to that scrapped design, but also made it different by giving it more of a focus on Aegislash's traits. I initially intended to make a Blade Mode and a Shield Mode, but both orientations are a bit too aggressive, so I just named both modes after the weight distribution. A fun "stock" combo for it can be Pierce Gillgard 1' Hit Ultimate Reboot'.

Toxin Agoyon/Naganadel

Spoiler (Click to View)

Wing Mode

Stinger Mode

Ultra Stinger Mode

This Bey is based on the Ultra Beast Naganadel, which is an Ultra Beast and a Dragon Type, so I decided to make it Left-Spin. It turned out to seem more like a Balance Type than the Attack Type that I originally intended because of the reserved contact points and similarities to Tact. The gimmick is reliant on the inner ring's orientation. Wing Mode is when the spikes are aligned with the big wings on the Ring, effectively doing nothing aside from forcing you to use the part in order to make it "legal". Stinger Mode is when the spikes are exposed. This mode allows the ring to rotate and parry attacks. The last mode is Ultra Stinger Mode, which requires a different attachment. This mode doesn't allow the inner ring to rotate, but makes the contact points slightly more aggressive. A fun "stock" combo for it can be Toxin Agoyon 7 Reach Trans'.

One thing is I’m wondering is that these look like they use the sparking system so I wanted to know which chassis they both use

Oh yeah, I forgot about that I didn't make a custom Chassis for either one of them, but both could work with 1D due to the spikes. I'm updating the post now.

---

[font="Proxima Nova Regular", "Helvetica Neue", Helvetica, Arial, sans-serif][/font]

My rendition of a sparking Behemoth (Just ring for right now)
https://www.tinkercad.com/things/dYxNTlxqw5I-bad-ring

---

I'm gonna Ragnawreck ya

I like it a lot! Cool job. I cannot wait to see the chip.

I like it a lot! Cool job. I cannot wait to see the chip.

I'm kinda at a writers block kind of moment so I haven't been putting out as many designs as usual but hopefully it'll be out soon

---

I'm gonna Ragnawreck ya

Can anyone make a design model for Achilles or Spriggan in Sparking

Can anyone make a design model for Achilles or Spriggan in Sparking

Logic123ABC has made a spriggan ring

I made a Sparking version of Geist Fafnir
https://www.tinkercad.com/things/a7Jvohi...ist-fafnir

---

I havenb't tested it yet though but I have done some "spin simulator" tests

I made a Sparking version of Geist Fafnir
https://www.tinkercad.com/things/a7Jvohi...ist-fafnir

---

I havenb't tested it yet though but I have done some "spin simulator" tests

Interesting, a clockwise rotating Fafnir.
I may try to print this sometime.

---

"If I ignore a friend I have the ability to help, wouldn't I be betraying him?" -Killua Zoldyck

It's not clockwise, but theres a drain fafnir that is

---

I used the mirror tool

It's not clockwise, but theres a drain fafnir that is

---

I used the mirror tool

I see that now. I just assumed it was because of the R on the ring.
Thanks for clarifying.

---

"If I ignore a friend I have the ability to help, wouldn't I be betraying him?" -Killua Zoldyck

Anytime. I might make a Deathscyther Sparking

---

Did you print it already, because You have to print the Blur rubber pieces separately

It's not clockwise, but theres a drain fafnir that is

---

I used the mirror tool

I see that now. I just assumed it was because of the R on the ring.
Thanks for clarifying.

It actually is Right Spin. The Rs would be backwards if it was mirrored. I see that it was facing the right way during the mirroring process, but now it got mirrored to be Right Spin, probably on accident.

---

[font="Proxima Nova Regular", "Helvetica Neue", Helvetica, Arial, sans-serif][/font]

Citrus is right But now I modified it to be left spin

---

Does anyone know where I can get a Sparking chip template?

Does anyone know where I can get a Sparking chip template?

pretty much everywhere in tinkercad.

---

I'm gonna Ragnawreck ya

Not any templates, but there are premade chips

I made a sparking Evolution for Forneus.

---

It's called Mikado Forneus because Mikado stands for Emperor

---

https://www.tinkercad.com/things/gc0Tmkm...do-forneus

I made a sparking Evolution for Forneus.

---

It's called Mikado Forneus because Mikado stands for Emperor

---

https://www.tinkercad.com/things/gc0Tmkm...do-forneus

Did you just use Eduard1_0's scan of Emperor forneus, and just slap it on to a sparking template?
Well either way it's lookin good!

---

I'm gonna Ragnawreck ya

I did use his Forneus template, But not only that, there is a way to extract the models from the game. I'm trying to extract More models and continue what he started with the reverse spin beys.

Can anyone design a sparking Achilles that isn’t zip how Achilles

I want someone to create the four beys of the Elemental Bladers from Elemental Warriors: Beyblade Elemental Force series.



Dragoon Cyclone - This is a combination beyblade of Dragoon Grip Attacker & Dragoon Storm with high speed & strong power attacks.





Dranzer Flare - is a combination of Dranzer Spiral & Dranzer Auto Balancer with a changing blade base from Attack to Stamina mode.





Draciel Fort Shell - is a defense type combination of Draciel Metal Ball Defender & Master Draciel with maximum defense power.




Driger Spark - It is a combination of Driger Slash & Master Driger in a fusion for a good Stamina type bey in the tournament.





I have the stickers on my Deviantart Account: https://www.deviantart.com/warriorearthmars01



You can make them in different 3d printed site to make modified beys for the future mods.

You can use these four in a beybattle videos in youtube to see, how they do in battle.


I like in Burst Format in whatever:

Burst

God / Evolution

Chou-Z / Turbo

Gachi / Rise

or Sparking