3D Printed Plastic Gen Beyblades

Mcup2 · Dec. 19, 2017 4:11 AM

About a month ago I decided to 3d print a beyblade so I made an Attack ring then a Bit chip then a Weight disk then a base and then finally today I completed the spin gear.
[Edit: I have just made a printable Dragoon S https://www.thingiverse.com/thing:2722462] [Image: img-0892_orig.jpg]

https://www.thingiverse.com/Mcup2/designs
[Image: img-0870-1_orig.jpg]

https://www.thingiverse.com/Mcup2/designs
[Image: img-0866-1_orig.jpg]

https://www.thingiverse.com/Mcup2/designs
[Image: dIf6aY6_kQT0mvy381xfRn_iaR4y0MxPmn-ERm44...w1366-h613]

https://www.thingiverse.com/Mcup2/designs
[Image: img-0869-1_orig.jpg]

Everything is On Thingiverse under my username Mcup2 if you want to know more or download my files. https://www.thingiverse.com/Mcup2/designs
[Image: img-0874_orig.jpg]

dt1000 · Dec. 19, 2017 1:45 PM

(Dec. 19, 2017 4:11 AM)Mcup2 Wrote: About a month ago I decided to 3d print a beyblade so I made an Attack ring then a Bit chip then a Weight disk then a base and then finally today I completed the spin gear.
Everything is On Thingiverse under my username Mcup2 if you want to know more or download my files. https://www.thingiverse.com/Mcup2/designs

Nice job! Do they print out to scale?

My Beyblade Customs:
Attack
Xcalibur Heavy Accel
Defense
Wyvron Armed Massive
Zombie
Drain Fafnir Heavy Weight
Balance
Xcalibur Knuckle Massive

Do not post drafts without moderator permission.

Drain Nate · Dec. 19, 2017 2:45 PM

(Dec. 19, 2017 4:11 AM)Mcup2 Wrote: About a month ago I decided to 3d print a beyblade so I made an Attack ring then a Bit chip then a Weight disk then a base and then finally today I completed the spin gear.
Everything is On Thingiverse under my username Mcup2 if you want to know more or download my files. https://www.thingiverse.com/Mcup2/designs

OMG!!! good for you, i couldn't do that in a 1,000,000 years!!!!!!

Mcup2 · Dec. 19, 2017 5:47 PM

(Dec. 19, 2017 1:45 PM)dt1000 Wrote:
(Dec. 19, 2017 4:11 AM)Mcup2 Wrote: About a month ago I decided to 3d print a beyblade so I made an Attack ring then a Bit chip then a Weight disk then a base and then finally today I completed the spin gear.
Everything is On Thingiverse under my username Mcup2 if you want to know more or download my files. https://www.thingiverse.com/Mcup2/designs

Nice job! Do they print out to scale?

I know for certain that the Attack Ring and Bit Chip fit and I'm not sure yet but I am fairly certain that the rest of the parts fit as well. I sure you could use these as replacement parts, by I have been making these for the intention of printing an entire beyblade.

Eleanor · Dec. 19, 2017 6:11 PM

(Dec. 19, 2017 4:11 AM)Mcup2 Wrote: About a month ago I decided to 3d print a beyblade so I made an Attack ring then a Bit chip then a Weight disk then a base and then finally today I completed the spin gear.
Everything is On Thingiverse under my username Mcup2 if you want to know more or download my files. https://www.thingiverse.com/Mcup2/designs

sorry...But the image U uplded is not loading...Can U upld it again??...And also I looked upto ur designs...They were really pretty cool...

Mcup2 · Dec. 19, 2017 6:12 PM

Thank You I will try to fix it.

Lui Shirasagi · Dec. 19, 2017 7:53 PM

Is it possible that you can 3D print a all metal plastic generation beyblade?

Mcup2 · Dec. 19, 2017 8:07 PM

(Dec. 19, 2017 7:53 PM)Lui Shirasagi Wrote: Is it possible that you can 3D print a all metal plastic generation beyblade?

I do not believe so. There may be a metal-like filament because I know a wood-like filament exists, but if it does it is not very common and probably outrageously expensive. You can only print in plastic though or solids with a low melting point.

Mcup2 · Dec. 20, 2017 12:23 AM

I just made a 3d printed Dragoon S! : https://www.thingiverse.com/thing:2722462
https://drive.google.com/open?id=1ORF0b9...0QamrRVGX0
https://drive.google.com/open?id=1A7BGLG...gMk7VX8XeK
https://drive.google.com/open?id=1hTSCCT...KlEzngmU9i

Eleanor · Dec. 20, 2017 3:00 AM

They r very good...Can I request U to make a beyblade of my choice??
Can U make Dragoon F burst?? And can U colour it in golden??...

dt1000 · Dec. 20, 2017 3:08 AM

Can you please make a Lost Longinus? If so, I would like a heavy AR kinda like Dragoon S, with a left spin gear, Six Wide, and a tip like R2F angled left and made of plastic.

My Beyblade Customs:
Attack
Xcalibur Heavy Accel
Defense
Wyvron Armed Massive
Zombie
Drain Fafnir Heavy Weight
Balance
Xcalibur Knuckle Massive

Do not post drafts without moderator permission.

Mcup2 · Dec. 20, 2017 3:38 AM

(Dec. 20, 2017 3:08 AM)dt1000 Wrote: Can you please make a Lost Longinus? If so, I would like a heavy AR kinda like Dragoon S, with a left spin gear, Six Wide, and a tip like R2F angled left and made of plastic.

I have already made the attack ring for it if you would like to see it here https://www.thingiverse.com/thing:2719523
I will get working on it, but it may take me some time to get to.

(Dec. 20, 2017 3:00 AM)Eleanor Wrote: They r very good...Can I request U to make a beyblade of my choice??
Can U make Dragoon F burst?? And can U colour it in golden??...

Yes it sounds like a great idea. I don't have any gold filament but I could see if I could paint it gold. Do you intend for it to be burst gen or plastic gen? I could make it faster as a plastic gen than a burst bey because I have never made a burst bey before so there are certain challenges in starting from scratch. I also prefer plastic gen.

dt1000 · Dec. 20, 2017 3:58 AM

(Dec. 20, 2017  3:38 AM)Mcup2 Wrote:
(Dec. 20, 2017  3:08 AM)dt1000 Wrote: Can you please make a Lost Longinus? If so, I would like a heavy AR kinda like Dragoon S, with a left spin gear, Six Wide, and a tip like R2F angled left and made of plastic.

I have already made the attack ring for it if you would like to see it here https://www.thingiverse.com/thing:2719523
I will get working on it, but it may take me some time to get to.

(Dec. 20, 2017  3:00 AM)Eleanor Wrote: They r very good...Can I request U to make a beyblade of my choice??
Can U make Dragoon F burst?? And can U colour it in golden??...

Yes it sounds like a great idea. I don't have any gold filament but I could see if I could paint it gold. Do you intend for it to be burst gen or plastic gen? I could make it faster as a plastic gen than a burst bey because I have never made a burst bey before so there are certain challenges in starting from scratch. I also prefer plastic gen.

Nice one.

My Beyblade Customs:
Attack
Xcalibur Heavy Accel
Defense
Wyvron Armed Massive
Zombie
Drain Fafnir Heavy Weight
Balance
Xcalibur Knuckle Massive

Do not post drafts without moderator permission.

Eleanor · Dec. 20, 2017 5:08 AM

Burst gen pls...If it is a new challenge then go for it...
Also..U can take as much time as U want...Since its thw newest beyblade released in the corocoroaniki in the december version...I would like to see it in the 3D state than 2D state...

If U r using golden filters then the beyblade will look very beautiful...

Dragunix · Dec. 22, 2017 5:55 AM

Could you make a model of Dragoon MSUV with plastic? Or a Maximum Garuda?

Both in Burst version...sorry if this bothers you...

Hi! I've been on and off this site for a while now, but if you're new or just seeing this I hope you enjoy your stay on the WBO.

Mcup2 · Dec. 23, 2017 1:09 AM

Just made Lost Longinus - https://www.thingiverse.com/thing:2727245
https://drrrragooon.weebly.com/uploads/1...5_orig.jpg

dt1000 · Dec. 23, 2017 1:10 AM

(Dec. 23, 2017 1:09 AM)Mcup2 Wrote: Just made Lost Longinus - https://www.thingiverse.com/thing:2727245
https://drrrragooon.weebly.com/uploads/1...5_orig.jpg

Side view?

My Beyblade Customs:
Attack
Xcalibur Heavy Accel
Defense
Wyvron Armed Massive
Zombie
Drain Fafnir Heavy Weight
Balance
Xcalibur Knuckle Massive

Do not post drafts without moderator permission.

Mcup2 · Dec. 23, 2017 1:12 AM

(Dec. 23, 2017 1:10 AM)dt1000 Wrote:
(Dec. 23, 2017 1:09 AM)Mcup2 Wrote: Just made Lost Longinus - https://www.thingiverse.com/thing:2727245
https://drrrragooon.weebly.com/uploads/1...5_orig.jpg

Side view?

https://drrrragooon.weebly.com/uploads/1...6_orig.jpg

Mcup2 · Dec. 23, 2017 3:41 AM

(Dec. 22, 2017 5:55 AM)Dragunix Wrote: Could you make a model of Dragoon MSUV with plastic? Or a Maximum Garuda?

Both in Burst version...sorry if this bothers you...

Yes I would love to work on it, but is it ok if I don't get to it until after Christmas?

Dragunix · Dec. 23, 2017 3:54 AM

that's fine, don't worry Grin

Hi! I've been on and off this site for a while now, but if you're new or just seeing this I hope you enjoy your stay on the WBO.

Dracomageat · Dec. 28, 2017 5:04 PM

Could you print them in chocolate?

Hostileblade33 · Dec. 28, 2017 5:11 PM

(Dec. 28, 2017 5:04 PM)Dracomageat Wrote: Could you print them in chocolate?

errrr that would be impossible but if it WAS possible i would eat it (srry)

CyberKai2301 · Dec. 28, 2017 8:03 PM

Hey, I have an idea, why not make the plastics that were never released? like Galux, Tryhorn, Sharkrash, etc.? sorry if that's to much to ask, still though, would be cool to have those beys.

Dracomageat · Dec. 30, 2017 2:09 AM

(Dec. 28, 2017 5:11 PM)Hostileblade33 Wrote:
(Dec. 28, 2017 5:04 PM)Dracomageat Wrote: Could you print them in chocolate?

errrr that would be impossible but if it WAS possible i would eat it (srry)

No, no, no. It's winner eats loser, obviously.

Mcup2 · Jan. 02, 2018 2:14 AM

(Dec. 28, 2017 8:03 PM)CyberKai2301 Wrote: Hey, I have an idea, why not make the plastics that were never released? like Galux, Tryhorn, Sharkrash, etc.? sorry if that's to much to ask, still though, would be cool to have those beys.

Yes I would love to sorry I haven't checked in a few days