could someone help me? the stuff inside the laucher came out

You need to be more specific of provide pictures or we can't help.

Stuff fell out

Anyway, this is how it should look.
[Image: Openedshooters002lj0.jpg]

You'll have to make sure the spring is properly gripping the flap (that prevents you inserting the winder the wrong way).
That doesn't appear to be the case in this pic. (if the pictures completely right and set, ignore the following).
In perspective to the photo:
The bent piece (lowest part of the spring in the picture) should be moved so it's above the flap. Then the flap shall be held to the gear. Carefully place the top of the case back on, otherwise the contents may fall out... Again.

Stuff fell out

Anyway, this is how it should look.
[Image: Openedshooters002lj0.jpg]

You'll have to make sure the spring is properly gripping the flap (that prevents you inserting the winder the wrong way).
That doesn't appear to be the case in this pic. (if the pictures completely right and set, ignore the following).
In perspective to the photo:
The bent piece (lowest part of the spring in the picture) should be moved so it's above the flap. Then the flap shall be held to the gear. Carefully place the top of the case back on, otherwise the contents may fall out... Again.

thxs dude

The stopper (flap) appears to be upside-down in that photo. Place it so the cut in the flap faces down and the curved part of the end is facing away from the gear.

The stopper is upside down and the vertical part of that spring needs to be behind the stopper.

---

|| BeyUK.net archive project || Number one source for BeyMedia ||