Somehow, my string launchers still good over the past 6-ish years, only the plastic's been chipped off.
Also... anyone else have that problem with mfb beylaunchers where you launch one bey and the string gets stuck, forcing you to pull it gently to go back into place? I think this might be the gears in the launcher breaking, causing a "skip" in the launch.

Oh my god, I hate when that happens. -,-

---

I was practicing with Burst combos a few days back and apparently, when I launched my combo, my Bey wouldn't fly off from the launcher. I tried getting the Bey off until I gently twisted the Driver. It keeps happening with my setup launcher grip but with just the String launcher itself, it works perfectly fine.

Am I launching too hard or is the grip, etc.?

Thanks!

It's probably the launcher. Sometimes the Beys do get stuff to the launch because they are just in too tightly, I think. I know the purple BeyLauncher from Wyvern had this issue where the Beys would not come off and the Layer would twist sometimes.

Maybe the prongs are just a little too wide? Not really sure how to explain it other than it is just stuck.

---

૮(•ᴥ•)ა

Somehow, my string launchers still good over the past 6-ish years, only the plastic's been chipped off.
Also... anyone else have that problem with mfb beylaunchers where you launch one bey and the string gets stuck, forcing you to pull it gently to go back into place? I think this might be the gears in the launcher breaking, causing a "skip" in the launch.

Oh my god, I hate when that happens. -,-

---

I was practicing with Burst combos a few days back and apparently, when I launched my combo, my Bey wouldn't fly off from the launcher. I tried getting the Bey off until I gently twisted the Driver. It keeps happening with my setup launcher grip but with just the String launcher itself, it works perfectly fine.

Am I launching too hard or is the grip, etc.?

Thanks!

It's probably the launcher. Sometimes the Beys do get stuff to the launch because they are just in too tightly, I think. I know the purple BeyLauncher from Wyvern had this issue where the Beys would not come off and the Layer would twist sometimes.

Maybe the prongs are just a little too wide? Not really sure how to explain it other than it is just stuck.

Probably but it's probably me always twisting the Beys into the launcher subconsciously. When I tried to not twist it, it worked fine.
Prongs are good. c:

---

"Hikaru Hasama and this is Storm Aquario, otherwise known as my most trusted friend." - Hikaru, S1, E6

Content Creator | MFB Miami Blader/Organizer - YouTube Channel - eBay Store - All Links

Yeah, all things end...

[Image: 6PK88Yf.jpg?1]

[Image: 874oC1w.jpg?1]


But not yet!

I've been checking my V2's wings and underside after every game for signs of stress or imminent breakage since I got it last month. About a week ago, though, this little crack appeared, so I haven't used it much since.

As good as this Layer's been to me, looks like I better start looking for a new one.

---

Spoiler (Click to View)

This is what we all want, Brad.

I also frequently check my V2 and it's doing fine. After my other one broke in less than a day I've been very cautious. Right now I'm using a v2 from the b-38 entry set and it's holding up fine. I don't have a normal colored v2 but I was wondering if there is a slight molding difference. As far as I can tell it looks identical to the pictures you just uploaded.

---

meow

I just lost my Thunder Dragon MS' flint...
Bummer...


I guess I'll just buy some Zippo flints instead.

---

                                                                                                                 

I hate that, yeah Zippo flints work. They don't spark quite as good, but they last a lot longer I think. The black ones can get chewed up pretty quick. Especially if they are external, like inba spark disc. I personally hoard all the black ones i get and never store em in the bey. FYI, I may know someone selling cheap NIB Sparkling Attackers that comes with an official TT black flint! (Me)
Look at this on eBay http://www.ebay.com/itm/162081719030
Would do $15 shipped to the US for WBO members, outside of ebay with PayPal only (but we can still do a goods transaction if you want so you are still protected)
I have at least 2 for sale, maybe 3

I hate that, yeah Zippo flints work. They don't spark quite as good, but they last a lot longer I think. The black ones can get chewed up pretty quick. Especially if they are external, like inba spark disc. I personally hoard all the black ones i get and never store em in the bey. FYI, I may know someone selling cheap NIB Sparkling Attackers that comes with an official TT black flint! (Me)
Look at this on eBay http://www.ebay.com/itm/162081719030
Would do $15 shipped to the US for WBO members, outside of ebay with PayPal only (but we can still do a goods transaction if you want so you are still protected)
I have at least 2 for sale, maybe 3

Cool!
I'm gonna buy a lot of stuff from you next month, haha!
XD

---

                                                                                                                 

Ugh.

[Image: 14654945162421505359452.jpg]

Ugh.

[Image: 14654945162421505359452.jpg]

Yo... how'd that happen?

---

Beyblader from Winnipeg, MB. Just getting into Burst because shipping from Japan to Canada is expensive.

I currently play Hearthstone (Battletag - ForZ#11527) and used to play Yu-Gi-Oh! competitively.

.......
I know I'm gonna regret asking but how!? XD

Edit: ForZ sniped me lol

---

☆WBBA Profile ☆

I decided to launch Dragoon V2 really hard with Left launcher + Neo Winder ONCE and somehow it broke my bb10...

Yes... it wasn't in a battle it was just Dragoon V2 in the stadium when this happened.

I decided to launch Dragoon V2 really hard with Left launcher + Neo Winder ONCE and somehow it broke my bb10...

"Somehow" mate... we all know how it happened lol

It's annoying though, hope you've got a few spares

---

☆WBBA Profile ☆

I decided to launch Dragoon V2 really hard with Left launcher + Neo Winder ONCE and somehow it broke my bb10...

Yes... it wasn't in a battle it was just Dragoon V2 in the stadium when this happened.

You break everything! Haha

I have just been applying tape to everything to hopefully avoid this...

---

I decided to launch Dragoon V2 really hard with Left launcher + Neo Winder ONCE and somehow it broke my bb10...

Yes... it wasn't in a battle it was just Dragoon V2 in the stadium when this happened.

You break everything! Haha

I have just been applying tape to everything to hopefully avoid this...

Next step... super dense and super large Diamond, with 1234Beyblade, it's definitely possible...

---

My Cho-Z Reaper Deathscyther .12.Cr concept render, click below to see!

Spoiler (Click to View)

No I don't plan on doing more yet.

I should probably go back to making fan custom Zero G beyblade concepts again

I decided to launch Dragoon V2 really hard with Left launcher + Neo Winder ONCE and somehow it broke my bb10...

Yes... it wasn't in a battle it was just Dragoon V2 in the stadium when this happened.

I'm starting to notice a trend here... You launch something hard, something's gonna break... Your Dragoon G's WD, 20XX Victory Valkyrie layers, and even a face bolt... you're murdering innocent beys... XD

Also...

Spoiler (Click to View)

[Image: DSC00456.jpg]
[Image: DSC00457.jpg]
I think it's safe to say it'll be easy for my Valkyrie layer to burst now with these chips in the teeth... if you saw the layer in person and not based off the potato-quality pictures haha.

We're all familiar with Valkyrie wearing down, sadly.

I decided to launch Dragoon V2 really hard with Left launcher + Neo Winder ONCE and somehow it broke my bb10...

Yes... it wasn't in a battle it was just Dragoon V2 in the stadium when this happened.

I'm starting to notice a trend here... You launch something hard, something's gonna break... Your Dragoon G's WD, 20XX Victory Valkyrie layers, and even a face bolt... you're murdering innocent beys... XD

Also...

Spoiler (Click to View)

[Image: DSC00456.jpg]
[Image: DSC00457.jpg]
I think it's safe to say it'll be easy for my Valkyrie layer to burst now with these chips in the teeth... if you saw the layer in person and not based off the potato-quality pictures haha.

To be fair, the facebolts aren't that hard to break in my experience... I've done it to three plastic ones and one metal face.

---

Beyblader from Winnipeg, MB. Just getting into Burst because shipping from Japan to Canada is expensive.

I currently play Hearthstone (Battletag - ForZ#11527) and used to play Yu-Gi-Oh! competitively.

I decided to launch Dragoon V2 really hard with Left launcher + Neo Winder ONCE and somehow it broke my bb10...

Yes... it wasn't in a battle it was just Dragoon V2 in the stadium when this happened.

I'm starting to notice a trend here... You launch something hard, something's gonna break... Your Dragoon G's WD, 20XX Victory Valkyrie layers, and even a face bolt... you're murdering innocent beys... XD

Also...

Spoiler (Click to View)

[Image: DSC00456.jpg]
[Image: DSC00457.jpg]
I think it's safe to say it'll be easy for my Valkyrie layer to burst now with these chips in the teeth... if you saw the layer in person and not based off the potato-quality pictures haha.

To be fair, the facebolts aren't that hard to break in my experience... I've done it to three plastic ones and one metal face.

I can't begin to explain how many face bolts I broke because I accidentally overtightened them, haha. Stone faces, I don't really know since I never really got into zero-g, although I'd assume it'd be the same, if not better than regular face bolts.


Also, really stupid question/joke time: If 1234beyblade breaks a lot of parts in his videos, pretty much breaking the bey...
...is he a BladeBreaker?

I would have to count the amount of faces ive broken. Might be around 20.

---

meow

Broken beylaunchers, broken beylaunchers everywhere

---

Nothing to see here, just waiting for my death -_-

Broken beylaunchers, broken beylaunchers everywhere

Haha, it's pretty fragile for beybladers who launches strong. Ripcord Launchers are pretty carp though.

Mudorios and I always break so many little Hasbro ripcords. we need to stop.

---

- The Gayblader

Broken beylaunchers, broken beylaunchers everywhere

Haha, it's pretty fragile for beybladers who launches strong. Ripcord Launchers are pretty carp though.

I have a collection of about 8 broken beylaunchers
Yes. Light launchers simply have no power compared to them, it's really too bad.

---

Nothing to see here, just waiting for my death -_-

Broken beylaunchers, broken beylaunchers everywhere

Haha, it's pretty fragile for beybladers who launches strong. Ripcord Launchers are pretty carp though.

I have a collection of about 8 broken beylaunchers
Yes. Light launchers simply have no power compared to them, it's really too bad.

They are great when you have a long winder! I prefer it to the Beylauncher, well at least for MFB.

So many broken Plastics, though. My Upper Dragon AR, SG Grip Base, Reverse Wolf, and Cross Attacker. So many good parts... So sad...

---

Do you live in SoCal near LA? Click here to find out if there is a LA Tournament near you soon!
Credits go to Mitsu for making these awesome avatar and signature!

Haha, it's pretty fragile for beybladers who launches strong. Ripcord Launchers are pretty carp though.

I have a collection of about 8 broken beylaunchers
Yes. Light launchers simply have no power compared to them, it's really too bad.

They are great when you have a long winder! I prefer it to the Beylauncher, well at least for MFB.

So many broken Plastics, though. My Upper Dragon AR, SG Grip Base, Reverse Wolf, and Cross Attacker. So many good parts... So sad...

Who cares about broken MFB, the Plastics breaking makes me cry ;-;
Breaking an Upper Dragoon hurts a lot, but at least it's cheap to replace.

---

[font="Proxima Nova Regular", "Helvetica Neue", Helvetica, Arial, sans-serif][/font]