well i got an idea and was thinking them to come in future beys it's a special or hybrid version of all the right spin bey wheels in left version wat do u think about this guys
What innovation would you like to see in future beyblades?
Life would be good if Beyblades respond like pets. Just like in the tv show. Or if beyblades were living things
They'd never bother releasing mirrors of all old beys, BUT all it would require for HWS beys is a Clear Wheel without the plastic "walls" that block Beylauncher-L prongs. The Metal things that site behind the plastic walls, on the MW, that look like they'd block prongs actually don't (they make it a little awkward to attach, but it works fine), so it's only the CW. That said, if they were going to do it, they would have by now. Burn is pretty dang impressive in left spin, and I imagine a dual spin Beat would do nicely too. Instead of being hurt badly by the impact (beat loses a lot of spin on impact, so it only gets a few chance to KO opponents. However, due to the massive smash it exerts, this is generally enough), it would be able to knock things around and keep moving.
But yeah, unlikely
But yeah, unlikely
(May. 30, 2011 7:12 AM)th!nk Wrote: They'd never bother releasing mirrors of all old beys, BUT all it would require for HWS beys is a Clear Wheel without the plastic "walls" that block Beylauncher-L prongs. The Metal things that site behind the plastic walls, on the MW, that look like they'd block prongs actually don't (they make it a little awkward to attach, but it works fine), so it's only the CW. That said, if they were going to do it, they would have by now. Burn is pretty dang impressive in left spin, and I imagine a dual spin Beat would do nicely too. Instead of being hurt badly by the impact (beat loses a lot of spin on impact, so it only gets a few chance to KO opponents. However, due to the massive smash it exerts, this is generally enough), it would be able to knock things around and keep moving.
But yeah, unlikely
i know that prob yesterday i saw a vortex stadium (packed) and saw that the pegasus launcher was of white colour and misunderstood that it is is a left spin pegasus then this idea hit in my mind currently i m working on creating a left spin storm wheel and i have removed those wall from my eagle ring so im sure i can create a left spin storm eagle which i can launch using l-drago's launcher
Lol, I've done that with Dark (along with removing half the protrusions and filling the bottom with Blu-Tac for weight), but you don't need to modify MW's.
As long as you leave enough of the "walls" on the CW that the prongs of the launcher can have something to grip (look at the side where the Beylauncher prongs are supposed to go in for how much), it'll work fine. The metal walls don't really get in the way at all
As long as you leave enough of the "walls" on the CW that the prongs of the launcher can have something to grip (look at the side where the Beylauncher prongs are supposed to go in for how much), it'll work fine. The metal walls don't really get in the way at all
(May. 30, 2011 7:26 AM)th!nk Wrote: Lol, I've done that with Dark (alogn with removing half the protrusions and filling the bottom with Blu-Tac for weight), but you don't need to modify MW's.
As long as you leave enough of the "walls" on the CW that the prongs of the launcher can have something to grip (look at the side where the Beylauncher prongs are supposed to go in for how much), it'll work fine. The metal walls don't really get in the way at all
they get dude so think why right and left spin beys have no wall or the metal wall on the side from where the launcher got fix into the bey
Man, I'm saying I've got a CW with no plastic walls, and it launches beys fine even if they have the walls on the MW. As in, this is a fact, it's not something that can be argued against.
I know LR beys come without them, and yeah, they make it marginally harder to fit the launcher in, but it's still not difficult at all, and there's no point mutilating an otherwise legal wheel. Storm isn't really that great in left spin, though.
I know LR beys come without them, and yeah, they make it marginally harder to fit the launcher in, but it's still not difficult at all, and there's no point mutilating an otherwise legal wheel. Storm isn't really that great in left spin, though.
(May. 30, 2011 7:34 AM)th!nk Wrote: Man, I'm saying I've got a CW with no plastic walls, and it launches beys fine even if they have the walls on the MW. As in, this is a fact, it's not something that can be argued against.
I know LR beys come without them, and yeah, they make it marginally harder to fit the launcher in, but it's still not difficult at all, and there's no point mutilating an otherwise legal wheel. Storm isn't really that great in left spin, though.
so according to u which wheel other than storm and burn should be modified and the attacks of storm in left spin r devastating
They shouldn't be modified. What I'm saying is that MW's DO NOT NEED MODIFICATION TO WORK IN BOTH DIRECTIONS.
A lot of wheels would be fine with dual spin, just as an added feature. Rock, Counter, Flame, Basalt (which would be really hard to kill if it could change spins). Most wheels would benefit.
A lot of wheels would be fine with dual spin, just as an added feature. Rock, Counter, Flame, Basalt (which would be really hard to kill if it could change spins). Most wheels would benefit.
Especially Aquario. That was awesome in Left spin. But that's off-topic. I'd really like to see (This is kida old.) a WORKING free-spinning tip. It's slightly more possible with the 4D Bottoms, but I'm not holding my breath. I'd really like to see a protrusion-less MW. That would dominate, but again, not banking on it. It's be nice, though. Epic Stamina and Defense.
Yeah, I'm not sure about pre-hws beys, maybe longer prongs could get under their walls, or they could make a spin-switching launcher or something, I dunno.
Basalt is pretty protrusion-less, and scythe looks to be mostly round.
Basalt is pretty protrusion-less, and scythe looks to be mostly round.
non wearing out rubber flats and MFB remakes of the old beyblades
Talon Dragoon LMLW85LRF now. It's metal wheel and clearwheel would be a MFB version of a fusion of Dragoon GT's AR and Dragoon MSUV's. It's track would be a Left wing except as wide as BD and made of metal. LRF, is well, LRF.
DragoonTalon, that is not an innovation.
Fine, how about better materials in like 2020? By then, rubber won't wear out, paint won't chip, and metal won't wear.
I want face bolt which have chips that store all of your bladeing data e.g: the peak of your blades rpm, number of hits, balance and beypoints although it would look better on a bit chip :-/, this is what i think it will look like: [Image: 330536746033_0jpg.jpg] also this is a good innovation:
Omega12 Wrote:Not that anyone here would be able to do this, but... Has anyone who watches American chopper ever though about powder coat for colored metal wheels? It's practically bullet proof and won't chip.there could be powder coated metal wheels this would help them last longer, same with weight disks
Not that anyone would be able to powder coat their metal wheels.
Wait. That would be the best thing. And also, you can switch it to MF as well... If that were to happen, Bit Chips would evolve so much... Bit Chip > Bit Protector > Facebolt > Super Face Bolt.
that's why I am tired of TakaraTomy using previous Beyblade's ideas. the track and bottoms and free spinning gimmicks.. Perhaps they ran out of ideas.
(Jun. 16, 2011 3:53 PM)BEY-TRACKER Wrote: that's why I am tired of TakaraTomy using previous Beyblade's ideas. the track and bottoms and free spinning gimmicks.. Perhaps they ran out of ideas.
Why must we repeat that this series is targetted towards a totally different generation who does not know anything about the Bakuten Shoot Beyblade line ? Of course they will reuse ideas and it makes sense if you consider that, and they are also trying not to repeat errors they made during that past series.
Like all of those giant wings sticking out of the sides of the bey that caused a lot of injuries (I'm looking at you, Wing Attacker)
holographic facebolt stickers with the materials they use in some books
Either the re-introduction of pre-painted facebolts or holographic stickers, or both if possible
Re-introduction of Sub Attick Rings for Clear Wheels
Re-introduction of Spin Gears in some way, shape or form
Re-introduction of the seperate preformance tip and spin gear, however the current combined versions could still be made too.
This is my proposal for a brand new device;
A blader uses a new type of launcher, which has a built in launcher grip, string launcher, an angle compass and a digital power launcher. Before the battle begins, the blader enters the parts his beyblade is using by scanning through the digital beyblade library the new launcher will have stored inside of it. One done, the beybaldes average stats will be calculated based on what parts were imputed through the search. Finnaly, when the beyblade is launched, the data collected from the information imputed earlier, what angle the new digital angle compass was upon launch, and the measurment of the speed and power of the launch from the new digital power launcher function, the launcher willl then tell you the speed, power, velocity, total time spinning, and rps (revolutions per second) of your beyblade mid battle. Alos, this new launcher would be able to sync to your opponent's new launcher via Wi-Fi or some other form of wireless connectivity in order to obtain the stats on your opponent's beyblade as well, to further enhance the data on your own beyblade.
This device is probobly unrealistic and would be expensive, but how freakin cool would that be huh? And maybe it would have a camera to watch the battle..... =D
Re-introduction of Sub Attick Rings for Clear Wheels
Re-introduction of Spin Gears in some way, shape or form
Re-introduction of the seperate preformance tip and spin gear, however the current combined versions could still be made too.
This is my proposal for a brand new device;
A blader uses a new type of launcher, which has a built in launcher grip, string launcher, an angle compass and a digital power launcher. Before the battle begins, the blader enters the parts his beyblade is using by scanning through the digital beyblade library the new launcher will have stored inside of it. One done, the beybaldes average stats will be calculated based on what parts were imputed through the search. Finnaly, when the beyblade is launched, the data collected from the information imputed earlier, what angle the new digital angle compass was upon launch, and the measurment of the speed and power of the launch from the new digital power launcher function, the launcher willl then tell you the speed, power, velocity, total time spinning, and rps (revolutions per second) of your beyblade mid battle. Alos, this new launcher would be able to sync to your opponent's new launcher via Wi-Fi or some other form of wireless connectivity in order to obtain the stats on your opponent's beyblade as well, to further enhance the data on your own beyblade.
This device is probobly unrealistic and would be expensive, but how freakin cool would that be huh? And maybe it would have a camera to watch the battle..... =D
that would work well with this:
your launcher could have some sort of scanner to scan the chip on the facebolt
faissaloo Wrote:I want face bolt which have chips that store all of your bladeing data e.g: the peak of your blades rpm, number of hits, balance and beypoints although it would look better on a bit chip :-/, this is what i think it will look like: [Image: 330536746033_0jpg.jpg]
your launcher could have some sort of scanner to scan the chip on the facebolt
(Jun. 16, 2011 5:56 PM)faissaloo Wrote: that would work well with this:faissaloo Wrote:I want face bolt which have chips that store all of your bladeing data e.g: the peak of your blades rpm, number of hits, balance and beypoints although it would look better on a bit chip :-/, this is what i think it will look like: [Image: 330536746033_0jpg.jpg]
your launcher could have some sort of scanner to scan the chip on the facebolt
the chip might get crushed from the hits from others bey if you are intent to use the face on your beys..aha
(Jun. 16, 2011 6:06 PM)Benjohadi Wrote:(Jun. 16, 2011 5:56 PM)faissaloo Wrote: that would work well with this:faissaloo Wrote:I want face bolt which have chips that store all of your bladeing data e.g: the peak of your blades rpm, number of hits, balance and beypoints although it would look better on a bit chip :-/, this is what i think it will look like: [Image: 330536746033_0jpg.jpg]
your launcher could have some sort of scanner to scan the chip on the facebolt
the chip might get crushed from the hits from others bey if you are intent to use the face on your beys..aha
how about a magnetic strip with a protector to stop it from being cruched it would be less prone to damage