Spoiler (Click to View)

I already mentioned this, but im worried about breakage issues. the way the rubber protrudes is quite daring, as it looks like, unlike vanish, the rubber is shaped to give the little point the brunt of the impact, not the entire ring. Even parts like brave and judgement have this to some degree, a whole section of the layer took the impact. Geist and Drain also have their rubber grounded deep inside the layer, whilst savior's rubber is sticking out. I'm most worried about the tip of the wings, as those are the most extended( so very likely to make contact) and they are most definitely going to bend, and it looks like the rubber and the glue or whatever is being used to hold the plastic will take the whole impact. The other main rubber protrusions would also be a problem, but it is somewhat grounded, and since savior is for attack, we can assume there will be a lot of head on strikes, mainly in the direction the other protrusions are. anyways, another problem I have with savior is it looks like a worse judgement, as there isn't enough rubber for it to act like brave or jet, and it doesn't seem like it works like judgement either.

Well that rubber part was supposed to fall out or AWAKENED from the description

Spoiler (Click to View)

I already mentioned this, but im worried about breakage issues. the way the rubber protrudes is quite daring, as it looks like, unlike vanish, the rubber is shaped to give the little point the brunt of the impact, not the entire ring. Even parts like brave and judgement have this to some degree, a whole section of the layer took the impact. Geist and Drain also have their rubber grounded deep inside the layer, whilst savior's rubber is sticking out. I'm most worried about the tip of the wings, as those are the most extended( so very likely to make contact) and they are most definitely going to bend, and it looks like the rubber and the glue or whatever is being used to hold the plastic will take the whole impact. The other main rubber protrusions would also be a problem, but it is somewhat grounded, and since savior is for attack, we can assume there will be a lot of head on strikes, mainly in the direction the other protrusions are. anyways, another problem I have with savior is it looks like a worse judgement, as there isn't enough rubber for it to act like brave or jet, and it doesn't seem like it works like judgement either.

Well that rubber part was supposed to fall out or AWAKENED from the description

oh, okay, thx, that makes more sense lol

---

emotional DaMAgE

I already mentioned this, but i'm worried about breakage issues. the way the rubber protrudes is quite daring, as it looks like, unlike vanish, the rubber is shaped to give the little point the brunt of the impact

Apparently, that is actually supposed to happen. The rigid barrage points are meant to wear down/break off.

---

Not bad eh?

It is actually Saber. Japanese just pronounce foreign words very loosely to the actual pronunciation in those cases. The characters セイバ with セ=se イ=i and バ=ba. Romanized it's seiba. If it was savior it would have ヴィア towards the end for that more v sound (vior but said "via/va"). Saber Valkyrie is its name.

The error with this Reddit comment lies in the fact that the "ヴィア" ("Via") is not commonly used and is barely present in the modern Japanese lexicon. "Savior" has been associated with "セイバー" for a long time - a pop culture example I can think of off the top of my head is the 1999 Gundam film "G-Saviour", or the "ZGMF-X23S Saviour Gundam" from the 2005 "Mobile Suit Gundam SEED Destiny" anime.

This thread can also refer to this Japanese Wikipedia page for "セイバー", which states: ""セイバー" is the Japanese pronounciation in Katakana notation of the words "saber", "sabre", "savior", and "saver"." This page also includes the usage of "セイバー" in pop culture, and differentiates the usage of "セイバー" in terms of "saber" (Kamen Rider Saber) and "savior" (Saviour Gundam). This is not a mistranslation by Takara Tomy but rather a misunderstanding of the Japanese language by fans.

---

Currently fan translating the Beyblade X manga. Beyblade Wiki Administrator and occasional manga scanlator.

I want to talk about Bey but not about name

I want to talk about Bey but not about name

Agreed. enough of the name already, the end product is the matter thing

As long as this Valkyrie doesn't have a bursting issue, since when awakened, the shape looks like Slash Valkyrie.

As long as this Valkyrie doesn't have a bursting issue, since when awakened, the shape looks like Slash Valkyrie.

I think because the attack points are actually filled in instead of being hollow, we might not have too much of a bursting issue.

---

LET IT RIP!!

wbba profile

My two beys Earth Eagle, Dark Libra, forever lost,

you'll always be the one that started my hobby

and the Beyblade Geeks rekindled it.

[Image: pdXOXLR.jpg]

I recently watch Pegasus Jumper battle videos, looks like jumping gimmick on Valkyrie will end up being good, it has powerful attack when jumping.

As long as this Valkyrie doesn't have a bursting issue, since when awakened, the shape looks like Slash Valkyrie.

I think because the attack points are actually filled in instead of being hollow, we might not have too much of a bursting issue.

If nothing else, the readdition of the Bound gimmick should aid it's burst resistance too. Seriously, that spring in God Valkyrie did more work than people seem to realize, and seeing it come back in the Valkyrie core is pretty cool.

---

Cincinnati-based Organizer, and owner of every single currently released TT Burst bey part in at least one color. Hard to think of anything I don't have from MFB either...

How much will valkyrie cost?

---

Valt and Valkyrie are my favorite
[Video: https://imgflip.com/gif/61frs5://]

With the Valkyrie core having a bound gimmick it might be interesting to see it in defensive combos as bound defense.

I was not expecting cores to have gimmicks.

Savior will be cool to see in battle.

---

Highly Observant Hasbro Blader.

---

I wonder if anyone knows the stats of the savior Valkyrie. If does I'll be glad to know.

With the Valkyrie core having a bound gimmick it might be interesting to see it in defensive combos as bound defense.

I was not expecting cores to have gimmicks.

Savior will be cool to see in battle.

But bound attack was pretty bad though, wouldn't it slow the bey down more than anything else? I guess I will give it the benefit of the doubt and assume that the bound gimmick will work better with the performance of a DB bey or maybe they have experimented with spring strength.

---

Not bad eh?

With the Valkyrie core having a bound gimmick it might be interesting to see it in defensive combos as bound defense.

I was not expecting cores to have gimmicks.

Savior will be cool to see in battle.

But bound attack was pretty bad though, wouldn't it slow the bey down more than anything else? I guess I will give it the benefit of the doubt and assume that the bound gimmick will work better with the performance of a DB bey or maybe they have experimented with spring strength.

Attack wise a bound gimmick is iffy, but the same gimmick on a defensive blade, when we get a right spin defense type in DB, could work well.

The spring acts as a sort of cushion that allows the layer to slow on impact instead of stopping suddenly. Like the crumple zone in a car. Spreads out the impact over a period of time. In theory this would lower burst damage because the layer still moves on impact.

Potentially Cyclone Valkyrie could have some good use because of this idea.

But we will have to see how the bound gimmick in the Valkyrie core works.

---

Highly Observant Hasbro Blader.

---

But bound attack was pretty bad though, wouldn't it slow the bey down more than anything else? I guess I will give it the benefit of the doubt and assume that the bound gimmick will work better with the performance of a DB bey or maybe they have experimented with spring strength.

Attack wise a bound gimmick is iffy, but the same gimmick on a defensive blade, when we get a right spin defense type in DB, could work well.

The spring acts as a sort of cushion that allows the layer to slow on impact instead of stopping suddenly. Like the crumple zone in a car. Spreads out the impact over a period of time. In theory this would lower burst damage because the layer still moves on impact.

Potentially Cyclone Valkyrie could have some good use because of this idea.

But we will have to see how the bound gimmick in the Valkyrie core works.

I'm pretty sure the bound gimmick is something that's in the layer itself, but only active when the Valkyrie core is used? I just don't see any way that they could have a gimmick on a core and have it still fit on other layers, especially because we've already seen the official pictures of Valkyrie's parts, and the Chip doesn't appear to have anything that would accommodate a gimmick.

Attack wise a bound gimmick is iffy, but the same gimmick on a defensive blade, when we get a right spin defense type in DB, could work well.

The spring acts as a sort of cushion that allows the layer to slow on impact instead of stopping suddenly. Like the crumple zone in a car. Spreads out the impact over a period of time. In theory this would lower burst damage because the layer still moves on impact.

Potentially Cyclone Valkyrie could have some good use because of this idea.

But we will have to see how the bound gimmick in the Valkyrie core works.

I'm pretty sure the bound gimmick is something that's in the layer itself, but only active when the Valkyrie core is used? I just don't see any way that they could have a gimmick on a core and have it still fit on other layers, especially because we've already seen the official pictures of Valkyrie's parts, and the Chip doesn't appear to have anything that would accommodate a gimmick.

Well in  the corocoro it was mentioned that The valkryie core has a small spring which can be used to make any blade have the bound gimmick. I dont know how it works or if its a translation error.

Part images





Driver name is shot

I'm pretty sure the bound gimmick is something that's in the layer itself, but only active when the Valkyrie core is used? I just don't see any way that they could have a gimmick on a core and have it still fit on other layers, especially because we've already seen the official pictures of Valkyrie's parts, and the Chip doesn't appear to have anything that would accommodate a gimmick.

Well in  the corocoro it was mentioned that The valkryie core has a small spring which can be used to make any blade have the bound gimmick. I dont know how it works or if its a translation error.

It's most likely a translation error, that or every DB layer that's been released so far has a secret bound gimmick built into them that nobody discovered (which doesn't seem very likely)

We ultimately won't know for sure until the coro coro video advertising Savior Valkyrie.

But if the bound gimmick is fit into the core then that will be cool.

I don't see how it could be in the blade but I might just be blind.

---

Highly Observant Hasbro Blader.

---

But bound attack was pretty bad though, wouldn't it slow the bey down more than anything else? I guess I will give it the benefit of the doubt and assume that the bound gimmick will work better with the performance of a DB bey or maybe they have experimented with spring strength.

Attack wise a bound gimmick is iffy, but the same gimmick on a defensive blade, when we get a right spin defense type in DB, could work well.

The spring acts as a sort of cushion that allows the layer to slow on impact instead of stopping suddenly. Like the crumple zone in a car. Spreads out the impact over a period of time. In theory this would lower burst damage because the layer still moves on impact.

Potentially Cyclone Valkyrie could have some good use because of this idea.

But we will have to see how the bound gimmick in the Valkyrie core works.

Ahh I never thought of it that way, that does sound pretty interesting. I guess it would be better to hope the spring is slightly weaker than.

---

On another note I gotta say, I think that the high mode on Savior Valkyrie looks better than low mode.

---

Not bad eh?

Part images





Driver name is shot

Hopefully it performs well

---

Valt and Valkyrie are my favorite
[Video: https://imgflip.com/gif/61frs5://]

It's most likely a translation error, that or every DB layer that's been released so far has a secret bound gimmick built into them that nobody discovered (which doesn't seem very likely)

Even if it's a translation error if you look at the corocoro page it shows that the Valkyrie core has a spring and it causing the blade to have a bound gimmick

It's most likely a translation error, that or every DB layer that's been released so far has a secret bound gimmick built into them that nobody discovered (which doesn't seem very likely)

Even if it's a translation error if you look at the corocoro page it shows that the Valkyrie core has a spring and it causing the blade to have a bound gimmick

Yeah and the blade looks just like dynamite or any other dB blade, there’s nothing special to the shape of the area the core is put in. The gimmick should work regardless of what blade it’s on.

---

i don’t know what to put here.

is there any pictures of the valkyrie on high mode?
or only on low mode?

---

is there any pictures of the valkyrie on high mode?
or only on low mode?

I saw one, it looks really good imo. I would even go as far as to say that it looks better than low mode.

---

Not bad eh?