Dang, this release looks insane, not entirely sure about the bound rubber tho...

---

Beyblade Burst is cool, I once made a continuation of MFB, but I stopped, but now I've restarted (Then stopped again). Geist Fafnir is also pretty cool

MR System Beyblade: https://worldbeyblade.org/Thread-4th-Season-MR-System

That Fafnir.looks incredible! 8' looks like a mix of 7 and 8, Ab is a really wide looking driver, so it might be good, and the Fafnir layer looks cool and does have the spring gimmick, BUT I was wrong about how it worked, as the rubber parts are spring loaded and not the plastic underneath.

---

My Cho-Z Reaper Deathscyther .12.Cr concept render, click below to see!

Spoiler (Click to View)

No I don't plan on doing more yet.

I should probably go back to making fan custom Zero G beyblade concepts again

Dang, this release looks insane, not entirely sure about the bound rubber tho...

Theorically, it increases the adherence between Fafnir and the other Beys, it increases the spin steal, the propulsion right after it touches the other Bey... Theorically.. I don't know if I've been clear. Pardon my english x)

---

"Even if my opponent is a god, I will defeat anyone who stays in my way [...] I reign over this world as the strongest, the Dragon Emperor himself" -Ryuga

Dang, this release looks insane, not entirely sure about the bound rubber tho...

Theorically, it increases the adherence between Fafnir and the other Beys, it increases the spin steal, the propulsion right after it touches the other Bey... Theorically.. I don't know if I've been clear. Pardon my english x)

Yup,I guess

---

Just a fellow Indian blader 
Check out my selling thread 
https://worldbeyblade.org/Thread-Selling...ing-thread
Also ,if you live in Delhi and will attend tournaments be ready to be CRUSHED
lol,enjoy??☝️

One detail I adore is that Fafnirs jaws close when the rubber is pressed, so if it spin steals, it's almost as if Fafnir is eating up the beyblades energy.

---

My Cho-Z Reaper Deathscyther .12.Cr concept render, click below to see!

Spoiler (Click to View)

No I don't plan on doing more yet.

I should probably go back to making fan custom Zero G beyblade concepts again

One detail I adore is that Fafnirs jaws close when the rubber is pressed, so if it spin steals, it's almost as if Fafnir is eating up the beyblades energy.

Or might be even BETTER ! ( My only doubt is the fact that Fafnir can break its wing ( if the springs holding it ,gets WEAK ))

---

 THE   Beyblader   from   ODISHA 

That's the layer. It is stunning! 
Credits to Drago Galaxy for the pic..

I actually thought Fafnir would have more metal but the claw details in the middle look more like painted silver plastic, and it's less shiny than the actual metal in front of the heads.

---

My Cho-Z Reaper Deathscyther .12.Cr concept render, click below to see!

Spoiler (Click to View)

No I don't plan on doing more yet.

I should probably go back to making fan custom Zero G beyblade concepts again

That's the layer. It is stunning! 
Credits to Drago Galaxy for the pic..

 Looks like FAFNIR is READY to HUNT !! ( WOW , fafnir's design has the same look as that of Winning Valtriek !! )

---

 THE   Beyblader   from   ODISHA 

Disc 8

Spoiler (Click to View)

Driver 

Spoiler (Click to View)

It isn't that clear.. But that's the best I could get of the whole driver.

I kinda hope the person makes more videos on it and battles.

I kinda hope the person makes more videos on it and battles.

From Drago Galaxy's video, this actually seems like a video, it is uploaded somehwere we just gotta hunt it down.

I kinda hope the person makes more videos on it and battles.

From Drago Galaxy's video, this actually seems like a video, it is uploaded somehwere we just gotta hunt it down.

I'm pretty sure that video was posted last page haha.

I think Drago Galaxy used that video. And unfortunately that video had no battles.

By the way has anyone else noticed the thinness of the 8' underside is? The part that fits frames on has walls as thin as the 12 disk.

---

My Cho-Z Reaper Deathscyther .12.Cr concept render, click below to see!

Spoiler (Click to View)

No I don't plan on doing more yet.

I should probably go back to making fan custom Zero G beyblade concepts again

I kinda hope the person makes more videos on it and battles.

From Drago Galaxy's video, this actually seems like a video, it is uploaded somehwere we just gotta hunt it down.

It's this one: https://www.youtube.com/watch?v=1xoPVQqH548&t=127s

From Drago Galaxy's video, this actually seems like a video, it is uploaded somehwere we just gotta hunt it down.

I'm pretty sure that video was posted last page haha.

I think Drago Galaxy used that video. And unfortunately that video had no battles.

By the way has anyone else noticed the thinness of the 8' underside is? The part that fits frames on has walls as thin as the 12 disk.

Oh no! I am so sorry! I missed that video.
The layer is really vibrant though. 
I noticed the thinness of the disc, but didn't really give it that much thought.

From Drago Galaxy's video, this actually seems like a video, it is uploaded somehwere we just gotta hunt it down.

It's this one: https://www.youtube.com/watch?v=1xoPVQqH548&t=127s

So...

Spoiler (Click to View)

Apparently, Geist Fafnir’s rubber pieces push in.
Absorb apparently has a spring, so it’s like Nothing + Revolve. Huh.

---

Hellibleri

Geist Fafnir looks incredible! Better gimmick than I thought it would have. I’m definitely getting this. As long as it has decent clicks it’ll be good I think.

Spoiler (Click to View)

 The spring+rubber parts along with the mouth opening up is sick. The mouth part is so small but it adds so much.

This looks sick, Absorb looks “nothing”like I thought it would look like.

---

check out my cousins channel

https://www.youtube.com/channel/UCu2Tl4p...rhRt1ynl8w

Here’s the original video for it. It was in the description of Draco Galaxy’s video. (You can see hints if Dead Hades and Cho Z Artemis and Apollos.): https://m.youtube.com/watch?v=oabMKwJyWIw

The gimmic looks a little underwhelming in my opinion. But the fact that the dragon heads 'bite down" when the rubber wings are pushed in is quite cool and cute in a way.

---

I think this release might be quite balanced. It'll probably lose in pure stamina to aH, but not to hS and rP. But when going for a LAD setup it might beat aH and then in turn lose to hS. Also, if the teeth are like eF, it'll probably get countered by bL and nL. Or maybe who knows, it could be turned into a left-spin attack setup

---

Beyblade Burst is cool, I once made a continuation of MFB, but I stopped, but now I've restarted (Then stopped again). Geist Fafnir is also pretty cool

MR System Beyblade: https://worldbeyblade.org/Thread-4th-Season-MR-System

But how did that person get gF?

---

Also we will be getting a remaster Destroy

---

 I love you 3000 Grumpy cat <3

I think this release might be quite balanced. It'll probably lose in pure stamina to aH, but not to hS and rP. But when going for a LAD setup it might beat aH and then in turn lose to hS. Also, if the teeth are like eF, it'll probably get countered by bL and nL. Or maybe who knows, it could be turned into a left-spin attack setup

I have to disagree, the shape of Fafnir as well as having rubber on the layer is going make it weak against hS, another left spin in terms of stamina.

---

My Cho-Z Reaper Deathscyther .12.Cr concept render, click below to see!

Spoiler (Click to View)

No I don't plan on doing more yet.

I should probably go back to making fan custom Zero G beyblade concepts again

gF's gimmick looks neat, but I can't say the same for 8’ and Absorb. I'd be willing to bet that using Geist Fafnir with the Destroy’ from the upcoming Switch game will be a common sight at tournaments when they're both out.

you are going to need that Ds’ driver badly with this layer

the shape of the gF wings will be a self-burst recoil festival vs left spin opponents