Illegal Beyblade Modifications Discussion

(May. 12, 2019  1:27 AM)boigamer25 Wrote: This thing is HUGE. Kind of pricey though but still huge XD

https://spintop-battle.com/index.php/pro...tion-neon/

This is really expensive but not bad. I still would buy the dome sled because it is more durable and a LOT cheaper. I was gonna buy that stadium but it's super expensive and I'm a broke teen. So I got the dome sled and literally spent like 3 hours just doing marathons. Though I will say that destroy, quake, operate, and some molds of hunter are not very active in either. Worn variable, worn evolution, volcanic, worn nothing, absorb, and xtend plus can go flying out of the stadium in either. I would assume that attack mode on dimension mould do the same, but like I said, I'm broke and I haven't bought cho z Achilles.XD
(May. 12, 2019  2:05 PM)Suoh sadboii Wrote:
(May. 12, 2019  1:27 AM)boigamer25 Wrote: This thing is HUGE. Kind of pricey though but still huge XD

https://spintop-battle.com/index.php/pro...tion-neon/

This is really expensive but not bad. I still would buy the dome sled because it is more durable and a LOT cheaper. I was gonna buy that stadium but it's super expensive and I'm a broke teen. So I got the dome sled and literally spent like 3 hours just doing marathons. Though I will say that destroy, quake, operate, and some molds of hunter are not very active in either. Worn variable, worn evolution, volcanic, worn nothing, absorb, and xtend plus can go flying out of the stadium in either. I would assume that attack mode on dimension mould do the same, but like I said, I'm broke and I haven't bought cho z Achilles.XD

Oof XD. I'm going to try to save up for it. I REALLY want that stadium. I hope I can do it lol
I really want it too, it's just that I can't spend a decent amount money without my parents getting on me.

Also the dome sled is bigger
(May. 12, 2019  5:51 PM)Suoh sadboii Wrote: I really want it too, it's just that I can't spend a decent amount money without my parents getting on me.

Also the dome sled is bigger

Lol. Don't know how you can get around that one. But it looks like the anime stadium.
Just be aware with using metal or concrete- it will cause abnormal wear on your tips, and might even outright break them.

My suggestion- though it will definitely be expensive. Is to browse the Internet for a plastic fabrication company in your area
(like one of these)
https://www.yellowpages.com/dale-tx/plas...c-products

and get a large stadium custom made from the closest type of plastic they have to a standard bey stadium.
again- I stress THIS WILL BE ORDERS OF MAGNITUDES MORE EXPENSIVE THAN OTHER OPTIONS.

But if you can afford it/save up and work towards it. You can have a stadium of any size you want.
I own the metal dome, and the only one affected is operate, for obvious reasons.
Cut off small "Y" shapes from scrap leather or old rubber (ballers/bracelets that are flat and made of rubber), trim the longest part as you see fit then you can use those to replicate the Burst resist gimmick of Gen Weight without sacrificing much needed weight or do it like a Burst stopper gimmick of the Chouzetsu trifecta.

Doing so, you can still use Ten/Sen/Zan/Metsu/Diabolos/Goku/Retsu with it. I'd call it "(Weight name) Plus/+" if just using one of those "Y" shaped things, and "(Weight name) Plus Ultra/+Ul" if using two, which is basically overkill since it is literally unBurstable.

You can check out my IG in kinghadoukenbeypla for a reference of the said mod: http://tiny.cc/burstleathermod - that is not a virus, I just used a website to shorten the link.



Another mod that I have is basically shaving off the nub part of the Xtend Chip from the Xtend Driver stock until the hole is shown and the sharp point of the Xtend is protruding (in Stamina mode). Further modification/cuts/shave/file can be done. I dubbed it originally as "Xtend+ Poor Man's version", but it was too long so it was instead "Xtend Minus" since we only removed some plastic from it. My version 1 is in this link: http://tiny.cc/burstxtendminus - also not a virus, only shortened the link.

The second version (that has defined Attack/Defense/Stamina modes) is in another picture, feel free to explore my IG page for more Beyblade Burst awesomeness and wackiness. I post my Gundam/plastic model builds there, too.
so i have my cousin's broken fake twin nemesis and its reboot tip was broken, so i had an idea of adding a fake revive phoenix armor in the middlie between the disc and layer and frame, and it is unburstable

another one is that i used a fake accel tip, added another spring in it, and put it on a fake revive phoenix ,it has so much burst resistance that when another bey hit the armor, it splitted into half.
I have a bit of a lame mod. You basically put a thin layer of hot glue on the bottom of any layer of choice. The hot glue cannot be too thick and you put it where the disc would make contact to make a burst resistor of sorts. I put it on a broken slash Valkyrie and it worked wonders. I might even put it on one of my hasbro V2's cus mine have trash slopes
Another mod I have is to pop off the handle of the red Sword Launcher (that came with Xeno Xcalibur), pop off the handle of the Long Winder LR Light Launcher (that came with Spriggan Requiem), then cut off bits of the head of the Long Winder LR (where the handle attaches to) in such a way that the Sword Launcher hilt would fit securely onto the Long Winder LR = Long Sword LR
id try shaving/grinding the Bullet Driver (the Thin part) down that way it looks like the Bullet Driver from the Anime
(Sep. 25, 2019  1:46 PM)DeltaZakuro Wrote: id try shaving/grinding the Bullet Driver (the Thin part) down that way it looks like the Bullet Driver from the Anime
+10 respect
(Sep. 25, 2019  8:15 PM)Suoh sadboii Wrote:
(Sep. 25, 2019  1:46 PM)DeltaZakuro Wrote: id try shaving/grinding the Bullet Driver (the Thin part) down that way it looks like the Bullet Driver from the Anime
+10 respect

I finally did it!!!

I got my diabolos, and like any intellectual, I grinded down the driver on the second day of having it! It looks just like the anime version!(this is what my other thread was for when I was looking for a new bullet stalk. It works great!

https://photos.app.goo.gl/jQvZVZkcDeJKJJN18
(Sep. 25, 2018  12:36 AM)mediocrekid Wrote: Presenting! My second illegal dragon head hms blade! I modeled the Longinus attack ring after Dragoon galaxy.
https://image.ibb.co/kyE4rp/A09_CB481_AC...FC76_C.jpg
https://image.ibb.co/ngY8HU/47_EC5_BBD_4...994_E3.jpg

how you remove the dragon head
(Nov. 26, 2019  3:02 PM)Dragon Slayer Wrote:
(Sep. 25, 2018  12:36 AM)mediocrekid Wrote: Presenting! My second illegal dragon head hms blade! I modeled the Longinus attack ring after Dragoon galaxy.
https://image.ibb.co/kyE4rp/A09_CB481_AC...FC76_C.jpg
https://image.ibb.co/ngY8HU/47_EC5_BBD_4...994_E3.jpg

how you remove the dragon head

Simple.  I used a metal saw to cut off the dragon heads.  Then I used a file to smooth out the jagged edges.
Very illegal combo here... If you get a hypersphere tip from hasbro and a random metal and top( metal can't have armour) ( u can also use charge from takara from ace dragon) and you need the metal from one of hasbros light up beys then stick the metal on the hypersphere tip (like you would the light up tip) and put the actual metal on, then the top on and make the bey. I know this works bc I've done it before. Thx
my friend melted a vertical disc to his metal fight bey and put a g t weight on it too it feel super heavy like a rock
There is one with the octa disc but you can use it with yard too. First, you attach the normal frame then you flip over the other one and put it on octa. Then you do the occasional
lock.
Put a rubber band around your Ultimate Reboot’ and have it reboot quicker. 200IQ
[Image: image0.jpg]
Not sure if anyone else did this.

Take the union blades and slap it between a core disk (preferably) and a hypersphere driver, or a driver that has a wide base.

There you have the Union Frame.
(Apr. 22, 2020  4:42 AM)peek Wrote: [Image: image0.jpg]
Not sure if anyone else did this.

Take the union blades and slap it between a core disk (preferably) and a hypersphere driver, or a driver that has a wide base.

There you have the Union Frame.

That would be nice if only the Union Sword is made intrinsically of metal. That kind of mod would leave you with a Union Sword snapped in half after one good hard collision lol
(Apr. 22, 2020  9:45 PM)Rouzuke Wrote:
(Apr. 22, 2020  4:42 AM)peek Wrote: [Image: image0.jpg]
Not sure if anyone else did this.

Take the union blades and slap it between a core disk (preferably) and a hypersphere driver, or a driver that has a wide base.

There you have the Union Frame.

That would be nice if only the Union Sword is made intrinsically of metal. That kind of mod would leave you with a Union Sword snapped in half after one good hard collision lol

*shameless plug* - www.shapeways.com/product/2YTT8C6NU/
(Apr. 22, 2020  9:45 PM)Rouzuke Wrote:
(Apr. 22, 2020  4:42 AM)peek Wrote: [Image: image0.jpg]
Not sure if anyone else did this.

Take the union blades and slap it between a core disk (preferably) and a hypersphere driver, or a driver that has a wide base.

There you have the Union Frame.

That would be nice if only the Union Sword is made intrinsically of metal. That kind of mod would leave you with a Union Sword snapped in half after one good hard collision lol

I did that with god valkyries blades
I made heavy hasbro 'cosmo' layer.

Hasbro version 11.3g sad.
TT with a real 'ten' weight 23.8g

Heavy hasbro mod 30.8g
Because Hasbro's layer is hollow and the weight is fake.
I filled the underside with lead bbs and resin.
(Fully outward weight)

Trying another one with tungsten powder or solid lead cast instead of bbs next.
See how heavy it gets?