It's been half a decade since I last ever studied the design and science of Beyblades. So expecting me to make a Beyblade with acceptable performance statistics and 100% legal customization is sort of a shaky preposition. Heres the Beyblade...
Cognitive Rhinoceros [to be entered]
Face
I want to know, what kind of symbol would best signify a Rhinoceros? I mean in the creative sense. I am not just going to slap a picture of a Rhino on there and call it a Beyblade-style piece of artwork.
Suggestion 1: It should resemble a Rhinoceros blowing fire through it's nose, just like Pegasus.
Suggestion 2: A metal face with the emblem.
Suggestion 3 added: Rhino's foot with a background of smoke and debris behind it.
Wheel: Rhinoceros
I was thinking of a roundish-square design. But what would be a fitting pattern on the sides/corners? Would a repeating horn pattern suffice or does it need MUCH more detail? Could I integrate a design without it reaching further than the Metal Wheel?
Suggestion 1: The wheel shoul resemble a combination of Bull and Aries. A two bumpy-horned design to resemble the fighting style of a Rhino.And wright Rhino , in violent scratched writing on it. Because the wheel is like Leone , the clear wheel should have no design at all and should fit the gaps of the metal for the defensive dynamics.
Suggestion 2: Add no design at all?
Metal Wheel: Cognitive
I am thinking along the lines of a "gear" shaped wheel with a unique pattern. I want the width to be similar to Burn- though I need direction in making it look creative. Thats the point. What would be a legal design?
Suggestion 1 added: Someone brought up the idea that since this is Beyblade introduces Cognitive, it should have an attack design. Something like a "gear" with sharp attack teeth. Of course leveled out to reduce excessive recoil.
Suggestion 2 added: Another idea was brought up, this one saying the Wheel should resemble a successor to the Leone "Horoscope Series" wheel. Except more bulky and smash-worthy. Oh, and add some Defense dynamics too.
Suggestion 3 added: EDIT: Keep the weight intact, just reduce the recoil.
Suggestion 4 added: Go left spin- hard decision.
Suggestion 5 added: Instead of focusing on smash , how about on upper? Rhino's tend to jerk up their horns in the underside of an opponent .The design concept is similiar to the Pre-HWS Aries .
Track:
I was thinking of a low track, so I bit the bullet with this idea of a shorter version of Horn. Just go ahead and tell me if this is a bad idea, or just plain illegal for most combos.
Suggestion 1 added: Someone stated that the H100 should use a joining design that fits Cognitive.
Suggestion 2 added: Rhino has a ton of bulk to protect it from predators , so the track should be called T125 , no not tornado 125 , Tank 125.In order to compromize itself in both fields it must equivalent heights in each.It looks like M145.It is jagged for attack , and big and focused on the outside for defense.
Suggestion 3 added:
Third suggestion , track-SM100-Smash Mauler100.Just a BIG upgrade to H100.Like H100 it is jagged , and joined to the metal wheel , but instead forms a complete circle , and is free spinning.
Jagged edges-attack mode
Complete circle and free-spinning-Defense mode
Performance Tip:
Basically it's a regular sized metal tip with a reverse spiral pattern cut into it and a "bump" in the center of that spiral which supposedly allows multiple attack patterns. Could the effect of this design work at all? How legal would it be?
Suggestion 1 added: This bottom is liable to change to Momentum Attacker. A wide metal tip with the spiral cut into it just like the original idea.
Suggestion 2 added: Horn Crusher, interestingly enough a ball inside a rubber tip, to add an effect similar to Driger s I suppose?
Suggestion 3 added: SC. Stomping Crusher , a bottom designed for constant movement , no breaks. A rubber bottom , as wide as XF.Can cause heavy attacks , and reduce recoil.
_____________________________________________________________________
Aaaaanyway......
Sorry if this seems like a blatant request- but it's sometimes better to take advice from an expert than go it alone all by yourself.
Credits to those who give suggestions (anyone who suggests something is added here)
Black-blade
X-blader
StormAquario221
(IT SHOULD BE NOTED THAT A MANGA IS BEING THOUGHT OF AS WELL, CONTRIBUTE IF POSSIBLE.)
Beyblades featured in this Manga
Black-Blade's entry;
Blaze Sagittario
Face-Sagittario
Clear wheel-Sagittario-Illustrates the body of Chiron , on each side.
Metal wheel-Blaze-A , smooth-looking wheel , which is roughly a circle , much like today's Burn.Except , it hides a rough texture , which causes friction when making with another bey.
Track-AR145-Arrow 145 has free-spinning " arrows " which absorb hits when hit.Very similiar to today's C145.
Bottom- AB-arrow ball a ball-like bottom with a sharp " arrow " bottom for equivalent fields in stamina and defense.
Second Entry
Poisonous Hydrus
Face : Hydrus
Clear wheel : Hydrus : Illustrates dragons swirling and encircling each other.
Metal wheel : Poisonous : And overall jagged design which is rather sloped which is good for both Smash/Upper attack.
Track: Rush Dragon 0.90 - stretches until inclined with the metal wheel.It opens a vent to blow air into to change direction.
Bottom : Viper striker : Bottom in the shape of a star in metal to create " slithering " movements.
Third Entry
Justific Libra
Face-Libra
Clear wheel-Libra-A picture that symbolizes an angel holding two scales on opposite sides of this clear wheel.
Metal wheel-Justific-A wierd named metal wheel , but in battle you wont be laughing anymore.It plays good in all three fields.
Track-CJ-Change Justice provides a unique mode switching mechanism , which changes height and allows opening for air to blow in to change movement.
Bottom-RMB-a metal bearing placed in a rubber bottom , so when hit can change modes from defence , stamina and attack.
Fourth Entry
Tempest Aquarius
Face : Aquarius
Clear wheel : Aquarius-A clear wheel that illustrates Hera , the goddess of love and marriage pouring water from a jar.
Metal wheel : Tempest : A much more spiked ver. of the Pre-HWS Aquario wheel , and the spikes face the other direction.This can cause some recoil , but it's worth it as this wheel delivers powerful Smash attack.
Track : D125
Bottom : FM- Fantasy Movement-a bottom with rubber and metal in random places.This creates slow,fast,sideways,straight etc. movemen , making it hard for players to determine another players move.
Fifth Entry
Aero Raven , feel free to post ideas of this new blade
Face : Raven ( since this is new I will post the Face pic. ) illustrates a Raven Wing with feathers in the background lining up , so it makes the word " Raven ".
Clear wheel : Raven-A clear wheel that illustrates the feathers of a raven twirling around and encircling each other.
Metal wheel : Aero-A wheel which resembles burn but the protrusions being more pronounced for smash attack , and being round for stamina.
Track-W 0.90-Wing-a track that lines up with the metal wheel that should increase speed and smash attack capabilities.
Bottom-FC-Flying cutter , is a rubber bottom , but , crested , for one way speeding direction.It resemble when a bird dives , it goes in one direction and accelerates by the second.
(NOTICE: Please do not argue over design and idea's, leave it in the Private Messaging)
Cognitive Rhinoceros [to be entered]
Face
I want to know, what kind of symbol would best signify a Rhinoceros? I mean in the creative sense. I am not just going to slap a picture of a Rhino on there and call it a Beyblade-style piece of artwork.
Suggestion 1: It should resemble a Rhinoceros blowing fire through it's nose, just like Pegasus.
Suggestion 2: A metal face with the emblem.
Suggestion 3 added: Rhino's foot with a background of smoke and debris behind it.
Wheel: Rhinoceros
I was thinking of a roundish-square design. But what would be a fitting pattern on the sides/corners? Would a repeating horn pattern suffice or does it need MUCH more detail? Could I integrate a design without it reaching further than the Metal Wheel?
Suggestion 1: The wheel shoul resemble a combination of Bull and Aries. A two bumpy-horned design to resemble the fighting style of a Rhino.And wright Rhino , in violent scratched writing on it. Because the wheel is like Leone , the clear wheel should have no design at all and should fit the gaps of the metal for the defensive dynamics.
Suggestion 2: Add no design at all?
Metal Wheel: Cognitive
I am thinking along the lines of a "gear" shaped wheel with a unique pattern. I want the width to be similar to Burn- though I need direction in making it look creative. Thats the point. What would be a legal design?
Suggestion 1 added: Someone brought up the idea that since this is Beyblade introduces Cognitive, it should have an attack design. Something like a "gear" with sharp attack teeth. Of course leveled out to reduce excessive recoil.
Suggestion 2 added: Another idea was brought up, this one saying the Wheel should resemble a successor to the Leone "Horoscope Series" wheel. Except more bulky and smash-worthy. Oh, and add some Defense dynamics too.
Suggestion 3 added: EDIT: Keep the weight intact, just reduce the recoil.
Suggestion 4 added: Go left spin- hard decision.
Suggestion 5 added: Instead of focusing on smash , how about on upper? Rhino's tend to jerk up their horns in the underside of an opponent .The design concept is similiar to the Pre-HWS Aries .
Track:
I was thinking of a low track, so I bit the bullet with this idea of a shorter version of Horn. Just go ahead and tell me if this is a bad idea, or just plain illegal for most combos.
Suggestion 1 added: Someone stated that the H100 should use a joining design that fits Cognitive.
Suggestion 2 added: Rhino has a ton of bulk to protect it from predators , so the track should be called T125 , no not tornado 125 , Tank 125.In order to compromize itself in both fields it must equivalent heights in each.It looks like M145.It is jagged for attack , and big and focused on the outside for defense.
Suggestion 3 added:
Third suggestion , track-SM100-Smash Mauler100.Just a BIG upgrade to H100.Like H100 it is jagged , and joined to the metal wheel , but instead forms a complete circle , and is free spinning.
Jagged edges-attack mode
Complete circle and free-spinning-Defense mode
Performance Tip:
Basically it's a regular sized metal tip with a reverse spiral pattern cut into it and a "bump" in the center of that spiral which supposedly allows multiple attack patterns. Could the effect of this design work at all? How legal would it be?
Suggestion 1 added: This bottom is liable to change to Momentum Attacker. A wide metal tip with the spiral cut into it just like the original idea.
Suggestion 2 added: Horn Crusher, interestingly enough a ball inside a rubber tip, to add an effect similar to Driger s I suppose?
Suggestion 3 added: SC. Stomping Crusher , a bottom designed for constant movement , no breaks. A rubber bottom , as wide as XF.Can cause heavy attacks , and reduce recoil.
_____________________________________________________________________
Aaaaanyway......
Sorry if this seems like a blatant request- but it's sometimes better to take advice from an expert than go it alone all by yourself.
Credits to those who give suggestions (anyone who suggests something is added here)
Black-blade
X-blader
StormAquario221
(IT SHOULD BE NOTED THAT A MANGA IS BEING THOUGHT OF AS WELL, CONTRIBUTE IF POSSIBLE.)
Beyblades featured in this Manga
Black-Blade's entry;
Blaze Sagittario
Face-Sagittario
Clear wheel-Sagittario-Illustrates the body of Chiron , on each side.
Metal wheel-Blaze-A , smooth-looking wheel , which is roughly a circle , much like today's Burn.Except , it hides a rough texture , which causes friction when making with another bey.
Track-AR145-Arrow 145 has free-spinning " arrows " which absorb hits when hit.Very similiar to today's C145.
Bottom- AB-arrow ball a ball-like bottom with a sharp " arrow " bottom for equivalent fields in stamina and defense.
Second Entry
Poisonous Hydrus
Face : Hydrus
Clear wheel : Hydrus : Illustrates dragons swirling and encircling each other.
Metal wheel : Poisonous : And overall jagged design which is rather sloped which is good for both Smash/Upper attack.
Track: Rush Dragon 0.90 - stretches until inclined with the metal wheel.It opens a vent to blow air into to change direction.
Bottom : Viper striker : Bottom in the shape of a star in metal to create " slithering " movements.
Third Entry
Justific Libra
Face-Libra
Clear wheel-Libra-A picture that symbolizes an angel holding two scales on opposite sides of this clear wheel.
Metal wheel-Justific-A wierd named metal wheel , but in battle you wont be laughing anymore.It plays good in all three fields.
Track-CJ-Change Justice provides a unique mode switching mechanism , which changes height and allows opening for air to blow in to change movement.
Bottom-RMB-a metal bearing placed in a rubber bottom , so when hit can change modes from defence , stamina and attack.
Fourth Entry
Tempest Aquarius
Face : Aquarius
Clear wheel : Aquarius-A clear wheel that illustrates Hera , the goddess of love and marriage pouring water from a jar.
Metal wheel : Tempest : A much more spiked ver. of the Pre-HWS Aquario wheel , and the spikes face the other direction.This can cause some recoil , but it's worth it as this wheel delivers powerful Smash attack.
Track : D125
Bottom : FM- Fantasy Movement-a bottom with rubber and metal in random places.This creates slow,fast,sideways,straight etc. movemen , making it hard for players to determine another players move.
Fifth Entry
Aero Raven , feel free to post ideas of this new blade
Face : Raven ( since this is new I will post the Face pic. ) illustrates a Raven Wing with feathers in the background lining up , so it makes the word " Raven ".
Clear wheel : Raven-A clear wheel that illustrates the feathers of a raven twirling around and encircling each other.
Metal wheel : Aero-A wheel which resembles burn but the protrusions being more pronounced for smash attack , and being round for stamina.
Track-W 0.90-Wing-a track that lines up with the metal wheel that should increase speed and smash attack capabilities.
Bottom-FC-Flying cutter , is a rubber bottom , but , crested , for one way speeding direction.It resemble when a bird dives , it goes in one direction and accelerates by the second.
(NOTICE: Please do not argue over design and idea's, leave it in the Private Messaging)
![[Image: DMS-AWP---DeadPool-%2528sig%2529.gif]](https://1.bp.blogspot.com/-tOY4RNT0Jes/TmeM0Lb-e7I/AAAAAAAAAxc/KzspFm_n09k/s1600/DMS-AWP---DeadPool-%2528sig%2529.gif)
![[Image: ssignature3.jpg]](https://i1220.photobucket.com/albums/dd455/aeroace21/ssignature3.jpg)
