[Image: Faceboltcontestentry1.png]
If that doesnt work, this link should lead you to it
http://s849.photobucket.com/albums/ab56/...entry1.png

KNIVES SPRING UP FROM THE GRI- Just kidding. Explanation below.

Bolt Bottom: You can store 1 bolt here for design purposes. Screw on- Screw off mechanism.

Accessory 1:Comfort Handle: Red Circle 1: Springs are free and can be bent to adjust to hand. Red Circle 2: Flip Winch to steady springstop (rectangular) and lock adjustment springs in place. Flip back to reloosen the springstop and let the springs free. Adjustments are meant to adjust to any hand size for maximum relaxation and comfort.

Accessory 2:Wheel Holder: Alright... time for my favorite idea. The part that holds the launcher can be adjusted for Ripcord Launcher, String Launcher, Right Handed or Left Handed individuals, also has a little place where the metal wheel slips into place and can be closed like a battery compartment for the bladers who want to change metal wheels.

If I am judged by realistic views instead of artsy views I feel confident

---

Diamond thank you for the sig! ^.^

not really, you hold it in your hand not on your hand like a real bow

Oh, ok...Brooklyn's launcher was more of a crossbow on your wrist sort of thing :l
Don't you think a string launcher would be more suited because you won't need to insert the rip cord back in every time.

That's the entry of DG.
(I will translate it)

   
   
   

---

here is my entry

   

   


   


   




E holder it is an accsecory for people who likes to hold the grip this way

grip: rubber pf it is designed for the perfect fit to maximise performance

laser pointer it points where the beyblade is going to land for a good launch

black bubbles when the launcher is on an angle a black bubble or two apears

R-grip for people who like a round grip

FH is a finger holder

the grip comes with an extra set of springs that goes in to the new launcher so the beyblade spin velocity is higher to have more chance of knocking out the other beyblade

---

Thanks Kai-V for this carpin awesome sig!

Spoiler (Click to View)

My WD is too worn to be used legally, so I'll just beat up the rest of my Earth Aquila and send it to Hasbro so I can get a new one for free.

For the third time....
Why did Takara Tomy nullify the multi-directional spin capability in the MFB's?

It is for a very simple reason. Think about the kids ...

Ive written a little something something for Kai-V, hah.

Roses are red,
Mods names are blue,
And so yours,
Unlike Fyuuors
Under this moonlit night
In Canada.

All a joke.

Because we all know that ghosts are purple ...

not really, you hold it in your hand not on your hand like a real bow

Oh, ok...Brooklyn's launcher was more of a crossbow on your wrist sort of thing :l
Don't you think a string launcher would be more suited because you won't need to insert the rip cord back in every time.

the ripcord normally could not be out of the launcher when you pull it and is totally made in hard plastic. so when you release the ripcord, it enter in the launcher to activate the system... mor you can bind it more powerfull is your launch... this is why you can upgrade the power with pulley ^^

---

Beyblade for life! I'm proud to represent Québec and all french people! :D
----
Beycloud Profil
----
Best tournament:

2014 (Click to View)

Montréal, Québec, Canada - July 12th 2014 - The Bombdiggity Tournament Limited Format => finished third!
Montréal, Québec, Canada - August 16th 2014 - "Notre ami Félix" tournament Zero-G => Finished Second!
Montréal, Québec, Canada - October 11th 2014 - QuéBeycois Tournament Standard Format => Finished third!

2015 (Click to View)

Montréal, Québec, Canada- May 24th 2015 - BeyDays Tournament Standard Format => Finished first!
Montréal, Québec, Canada- June 21st 2015 - La St-Jean Go SHOOT! Tournament Zero-G Format => Finished Second!

From the point of view of an archer, the way you designed where to grip the launcher would not work loyd87. You always want the bow to bend in the middle, and to do this you hold the bow in the middle.

There is ONE DAY LEFT to submit your entries.

---

Marksman Grip 2.0 This is my dream grip. The weight in the bottom of it is 36g I believe it's the average weight of a combo, but I didn't actually do the math.

http://img.photobucket.com/albums/v359/D...C00157.jpg

http://img.photobucket.com/albums/v359/D...C00158.jpg

http://img.photobucket.com/albums/v359/D...C00159.jpg

http://img.photobucket.com/albums/v359/D...C00163.jpg

---

[Image: pg1.gif]
[Image: pg2.gif]
[Image: pg3.gif]
[Image: pg4.gif]
[Image: pg5.gif]
this grip can be left hand too

edit:at first i want to make a real one but there is no time
maybe i will make one later

---

clarkero --->silverlight :)
beyblade need beyblade spirits
just like school need recess

You didn't show where the accessories go.. I'm thoroughly confused about the metal and rubber and just where the heck the LED is going. I don't mean to run down another person's design and god knows there are a few better ones than mine in here, but where your accessories fit on the grip should probably be shown/explained..

---

why is everyone taking my idea of a laser pointer?!

---

Thanks Kai-V for this carpin awesome sig!

Spoiler (Click to View)

My WD is too worn to be used legally, so I'll just beat up the rest of my Earth Aquila and send it to Hasbro so I can get a new one for free.

For the third time....
Why did Takara Tomy nullify the multi-directional spin capability in the MFB's?

It is for a very simple reason. Think about the kids ...

Ive written a little something something for Kai-V, hah.

Roses are red,
Mods names are blue,
And so yours,
Unlike Fyuuors
Under this moonlit night
In Canada.

All a joke.

Because we all know that ghosts are purple ...

Train do you sketch your writing with pencil before you go over with pen?

Ok, here is my entry, I hope you all like it. My intent was to give even more grip customization options than even the HMS customize grip gave. I brought back the two end ports for use for people who are left handed and added a nice extra option with giving a joint at the handle that can adjust the launcher's angle in your hand to either the format of the old marksman's grip or the angle of most of the older electronic grips. I would say that the only downside is it cant use the MFB easy shooter. So if you like the string Beylauncher then I hope you like my idea. Sure its mostly a simple adjust joint being added to the standard but I thought it was a nice thought.

---

I live free under my flag.

why is everyone taking my idea of a laser pointer?!

um, that's not exactly an original idea. A Grip with a "laser" intended to increase shooting accuracy was released years ago.

---

Train do you sketch your writing with pencil before you go over with pen?

Had to in this case I needed to make it pop to save me typing out reams and reams of explanations for the various parts.

---

why is everyone taking my idea of a laser pointer?!

um, that's not exactly an original idea. A Grip with a "laser" intended to increase shooting accuracy was released years ago.

oh really oops

---

Thanks Kai-V for this carpin awesome sig!

Spoiler (Click to View)

My WD is too worn to be used legally, so I'll just beat up the rest of my Earth Aquila and send it to Hasbro so I can get a new one for free.

For the third time....
Why did Takara Tomy nullify the multi-directional spin capability in the MFB's?

It is for a very simple reason. Think about the kids ...

Ive written a little something something for Kai-V, hah.

Roses are red,
Mods names are blue,
And so yours,
Unlike Fyuuors
Under this moonlit night
In Canada.

All a joke.

Because we all know that ghosts are purple ...

marksman grip or the accessorie nipe scope something like that using a lazer pointer..

Alantar: but it can be fonctionnal because this section is almost rigide and the rest is soft so it can be possible to use it. many bows are a long rigide surface in the middle...

---

Beyblade for life! I'm proud to represent Québec and all french people! :D
----
Beycloud Profil
----
Best tournament:

2014 (Click to View)

Montréal, Québec, Canada - July 12th 2014 - The Bombdiggity Tournament Limited Format => finished third!
Montréal, Québec, Canada - August 16th 2014 - "Notre ami Félix" tournament Zero-G => Finished Second!
Montréal, Québec, Canada - October 11th 2014 - QuéBeycois Tournament Standard Format => Finished third!

2015 (Click to View)

Montréal, Québec, Canada- May 24th 2015 - BeyDays Tournament Standard Format => Finished first!
Montréal, Québec, Canada- June 21st 2015 - La St-Jean Go SHOOT! Tournament Zero-G Format => Finished Second!

I don't have a lot of time for a write-up, but I don't want to forget to post this and I may not get a chance to do it later. Heres my entry:
[Image: superdeluxebeygrip2010.png]


It's a built in right launcher.

Features:
-Pivoting key tool (significantly thinner than the present model) Locks inside the grip when not in use. Works like a full sized wrench.

-Heat moldable grip cover, much like the rubber insoles you can buy for your shoes. You heat them up in boiling water or a stove, mold it to the desired shape, and when it cools it sets in shape.

-padded thumb rest, gel padding for ultimate comfort

-tri-colour launch power gauge, similar to the electronic power gauge for plastic generation tops. Instead of an RPM number read out, it lights up red yellow or green depending on the strength of launch.

-Accessory expansion slots (3) currently only one accessory [didn't have time for more!] Double axis spirit level (standard, but helpful!)

-weight dock, under the moldable grip there is a door for adding 4 heavy weights. Anyone who has weighted their grip should know why this is appealing.

---

www.tinyminion.com

This is by Lucky
(I will translate this too)

Ciao a tutti , ecco il mio progetto.

Si chiama Hammer Grip ed è ispirato al martello di Thor.

Il manico ha delle strisce applicate di cuoio proprio come il martello del dio Vichingo interpretato dalla Marvel, oltre all'estetica migliora la presa.

Il grip ha due agganci per il manico in modo che possa essere usato anche dai mancini.

Il primo accessorio è un manioco ergonomico ispirato alle asce dei vigili del fuoco, a cui ho applicato delle scanellature per le dita per migliorare la presa.

Il secondo è una base che si innesta una volta montato il grip e consente tramite una cinghia interna di lanciare due bey contemporaneamente. Per evitare che venga sbalzata via nel lancio, viene assestata con un cinghia che è un po' grezza ma coerente con lo stile del grip.

LINK DIRETTO alta risoluzione

[Image: hammergrip.th.jpg]

Uploaded with ImageShack.us

---

That genuinely is epic
I think we have a winner with that one, completely pointless but immensely awesome.

---

I cannot enter this contest after being a Moderator, I really don’t know what to do with the work I prepared. Anyway, this is my entry that doesn’t count, this might be a 'final boost' for the participants that are still thinking about their design, haha (You might not even understand a thing I will be saying):

Large Chunk of info (Click to View)

The name of my custom grip is D-Grip. It focuses on function more than the aesthetics.

The grip’s main structure is similar to the original MFB Launcher Grip, but with added slots and accessories.
http://a.imageshack.us/img97/4218/image3lu.jpg
The upper half of the Grip consists of a built in Angle Compass with 3 slots. It also has a shock absorbsion mechanism that works exactly like the BeyLauncher Suspension but with 3 sets of springs that are more easy to compress (resulting in better shock absorbsion).

The handle of the Launcher Grip is made from Polycarbonate with a rubber grip over it. The Rubber Grip uses 2 layers of Polyurethane (a durable and ‘grippy’ material) with a layer of silicone gel (which helps absorb shock and has a squishy feeling) between the 2 Polyurethane layers.
There is also a support handle which I call the Metal Assist 2. It attaches and detaches like the original Metal Assist. The Metal Assist 2 consists of a thin piece of long metal covered with Polycarbonate and Polyurethane (which provides a better grip). This accessory can help provide a more comfortable grip on the D-Grip as a whole.

The handle of the D-Grip contains a built-in extendable Tool made from Polycarbonate. It can be extended to 6cm in length.

The D-Grip can be held in 6 different positions due to it having 3 slots on the upper half of the Grip. This allows both Right and Left-handers to hold the grip comfortably.

This grip also includes other useful accessories.
http://a.imageshack.us/img62/407/image2qbu.jpg
The BeyLauncher RB (Rubber Ball) is a BeyLauncher with a Rubber Ball used as the handle. The Rubber Ball has a ‘core’ and string guide made from Polycarbonate. The core holds the string while the string guide keeps the string in place. The core and string guide is covered with a layer of Polyurethane and a thick layer of silicone gel which absorbs the impact dealt to the String, Launcher and your hands (just in case you let go of the Ball). The layer of silicone gel is covered with another layer of durable Polyurethane which helps protect the whole Rubber Ball.

Another useful accessory is the BeyPoint Holder. It is a landing port for the BeyPoint Card and Beypointer. You can slide the Beypoint Card onto the holder just like how you do it with the 3-Segment Launcher Grip. You can also slide the Beypointer onto the port and clip it onto the port. This Beypoint Holder can be slot onto the top half of the D-Grip just like the way you slot on the original Angle Compass onto the Launcher Grip. 8 different positions are available for the Beypoint Holder to be slotted on.

EDIT: Am I even allowed to provide a final boost?
EDIT 2: Fixed some typos.

---

⊿

Good job, Diamond, just unlucky that you are a mod that can't enter...

---

Never dead.

[Image: damian2a.jpg]

Clicky------->

Miscellaneous (Click to View)

Quote Random Stuff (Click to View)

heh, idiots. fish are legumes

Today I found out that Dark could be a decent attack wheel....when you wrap a rubber band around it

The first time being beaten!?

What the hell!? Defense types need a low track? Attack types need a high tip?
Do they know what the carp they're talking about!?

Big Mac 320YEN.

I'm lovin' it.

I guess I'm the fool.

Disregard.

I'm charismatic.

"segitarial"

lol

uhhhhhhhhhhhhh

I guess it's because we swarm the Facebook chat box with one of the most annoying smilies ever --> ^1^

Well yeah.
Earth is round.

Meh, I'll just leave my account on for a month.

Kai-V = God o' Bey?

I think I speak for all of us when I say "Baaaaaaaaaaah". We totally need to get some crab bit beasts up in here. Kanikanikanikanikani.

The Annoying R & K campaign has ended. Really short period, right?

But we're still annoying, haha.

Hong Kong is weird.

it seems like a no-brainer to use it this time.

First: Buy Booster Pegasis 145D
Second: Buy some Metal Faces
Third: Buy Storm Pegasis 100RF

Make MF Pegasis 145RF.
Your very own customized attack type Dark Wolf.

Dark Bull DF145FS, one of the worst combo in the world...

I can make a whole bey out of broken parts.

getting qualifications and preparing yourself for a successful future must suck compared to staying at home and playing video games right

You can grow up to be whatever you want if you try your very bestest.

Blader DJ is 99% Bey Spirit and 1% capital letters.

bassano sannoo

i forgot my older sisters name........but thats ok shes not that importent.

I nicknamed my Hasbro Gasher Energy Ring "Cancer Clear Wheel".

My classmate named his mixture of s pegasis, r leone, and f saggitario=pegaleotario

I call my combo BRUCE LEE. (will post pics later)
...
Rationale:
If you are looking for an ultimate Beyblade, this is it. I found it rather interesting to note that it can withstand attackers, kill smashers and outspin Stamina types.

RS is trash and should hopefully be outclassed soon.

Hm, we can almost do anything.

Hence why Kai-V is God o' Bey hah.

Do you guys know what combination is for the ULTIMATE BEYBLADE for MFB? (:

I interact with a couple people off the WBO, but mostly Daegor, Diamond, and R.

Mystery Quoting (Click to View)

"Recess is a part of the school day designed to give children a break from the more unpleasant aspects of the education system, but so many school yards are full of villainous students that recess can often turn out to be the most unpleasant part of the day."

Miscellaneous (Click to View)

This is the first spoiler (Click to View)

My posts are always confusing...because... ____________________________ I'm a piece of carp

This is the second spoiler (Click to View)

Master of M145Q

Whoa. You obviously put a lot of effort into this contest. It sucks that you can't enter.

---

戦う, 正義の 仮面ライダーV3!

[attachment=2711]

Here.

The launcher is both a ripcord and beylauncher.
The Grip has a built in beypointer also a place to put your bey in.
The thing w/ the red dot is a laser that shows were the bey will land.

---

NateKilgore
As Bey Brad once said:
heh, idiots. fish are legumes

maybe the next contest

---

Do you live in SoCal near LA? Click here to find out if there is a LA Tournament near you soon!
Credits go to Mitsu for making these awesome avatar and signature!