I hate to say this, but Wizard Rod 9-60 ball. It’s the most OP bey in the game and wins over 95% percent in its battles. It’s a nightmare for who you’re against. Phoenix wing 5-60 point is really good, cobalt dragoon any ratchet, besides 2 and 4 ratchets, on elevate is pretty good too. I usually run bite croc or shark edge on 3-60 rush and it’s done me well. Phoenix wing 1-60 rush is also pretty good for attack, tyranny beat is also good on point, and I think buster is good on glide.

First Tornament deck building help.
I've mostly just been collecting Beyblade X this whole time but a local game store looks to be starting to hold monthly events next month. They are likely using hasbo stadiums only as thats what they have but allowing both TT and Hasbeo beys.
Almost all videos/posts I've found are for builds on the TT stadium. Can anyone provide the best deck builds for the hasbro stadium or just what parts work / don't work well in it?
For example I've found alot of top tournaments using 1-60 but I've heard that it's useless in hasbro because you can't get out the pocket. But would that mean not using it on Buster or Aero?

Thanks.
My parts:
Bits
A, B, BS, C, D, DB, E, F, FB, G, GB, GF, GP, H, HN, HT, LF, MN, N, O, P, R, RA, S, T, U.
Ratchets
1-60, 2-60, 3-60, 3-70, 3-80, 3-85, 4-60, 4-70, 4-80, 5-60, 5-70, 5-80, 7-70, 9-60, 9-70, 9-80.
Blades
AeroPegasus, ArrowWizard, BiteCroc, BlackShell, ClawLeon, CobaltDragoon, Dagger Dran, DranBuster, GaleWyvern, HellsChain, HellsHammer, HellsScythe, HelmKnight, HornRhino, KnifeShinobi, KnightLance, KnightMail, KnightShield, PhoenixRudder, PhoenixWing, RoarTyranno, Savage Bear, SharkEdge, ShinobiShadow, SilverWolf, SphinxCowl, SteelSamurai, SwordDran, TalonPetra, TuskMammoth, TyrannoBeat, UnicornSting, ViperTail, WeissTiger, WhaleWave, WizardRod, YellKong

Aero Pegasus 9-60 Rush: Your best bet for sure. Great attacks and amazing stamina plus easy to control 

Wizard Rod 3-60 Ball/ Silver Wolf 3-60 Hexa: Both super easy to use competitive stamina combinations. Wolf is more defensive and harder to burst, while Wizard has more pure stamina. 

Knight Mail 5-60 Point: A newer combo but super amazing, gives incredibly hard hits and has amazing defensive and good stamina. 

Dranbuster 1-60 LowFlat: Glass cannon, it will hit super hard and get knockouts but loses stamina fast if not used right 


These 5 beys are all super solid but if you want to use wizard and wolf both in a deck, you probably want to give wolf 5-60 since you can’t use 3-60 twice. If not that situation than you should be good. Use these as a starting point and build combos based on what you learn from others as well as your blading style, which is something you’ll know once you see what you prefer.

---

Blader for 8+years, CA Organizer, hoping to improve at the game and meet more people along the way. Let It Rip!

9 desk sprizen top and ultimate reboot driver

Hi i have the parts:
Layers-
* Dran Sword
* Dran Dagger
* Dran Buster
* Leon Claw
Ratchets-
* 9-60
* 7-60
* 3-70
* 4-80
Bits-
* LF
* GN
* DB
* N
Id like 3 viable combos for comps
My best attempt is:
Dran Sword
3-70
LF

---

Hi i have the parts:
Layers-
* Dran Sword
* Dran Dagger
* Dran Buster
* Leon Claw
Ratchets-
* 9-60
* 7-60
* 3-70
* 4-80
Bits-
* LF
* GN
* DB
* N
Id like 3 viable combos for comps
My best attempt is:
Dran Sword
3-70
LF

and my style of play is smash attack, but i can do anything

---

Eh. I am the leader of Team RPM.
'Nuff said.
Lol jk one more thing...
:3
-Enigma

Hi i have the parts:
Layers-
* Dran Sword
* Dran Dagger
* Dran Buster
* Leon Claw
Ratchets-
* 9-60
* 7-60
* 3-70
* 4-80
Bits-
* LF
* GN
* DB
* N
Id like 3 viable combos for comps
My best attempt is:
Dran Sword
3-70
LF

---

TeamRPMHi i have the parts:
Layers-
* Dran Sword
* Dran Dagger
* Dran Buster
* Leon Claw
Ratchets-
* 9-60
* 7-60
* 3-70
* 4-80
Bits-
* LF
* GN
* DB
* N
Id like 3 viable combos for comps
My best attempt is:
Dran Sword
3-70
LF
and my style of play is smash attack, but i can do anything

hi i recommend Dran Buster 3-70 LF, Dran sword 9-60 DB, Dran dagger 4-80 N.

---

yes i am a licensed beycrafter 

Hi i have the parts:
Layers-
* Dran Sword
* Dran Dagger
* Dran Buster
* Leon Claw
Ratchets-
* 9-60
* 7-60
* 3-70
* 4-80
Bits-
* LF
* GN
* DB
* N
Id like 3 viable combos for comps
My best attempt is:
Dran Sword
3-70
LF

---

TeamRPMHi i have the parts:
Layers-
* Dran Sword
* Dran Dagger
* Dran Buster
* Leon Claw
Ratchets-
* 9-60
* 7-60
* 3-70
* 4-80
Bits-
* LF
* GN
* DB
* N
Id like 3 viable combos for comps
My best attempt is:
Dran Sword
3-70
LF
and my style of play is smash attack, but i can do anything

hi i recommend Dran Buster 3-70 LF, Dran sword 9-60 DB, Dran dagger 4-80 N.

hmmm hi! ill try them

---

Eh. I am the leader of Team RPM.
'Nuff said.
Lol jk one more thing...
:3
-Enigma

Can someone make me a good attack combo? I have the parts to: arrow wizard, horn rhino, dagger dran, scythe incendio, tail viper and helm knight

I don't know the other parts to some of the beys, so sorry in advance. Some of them you could figure out by yourself.

MY LIST
Optimus Prime 4-60 point
Megatron 4-80 ball
Keel Shark (Shark Edge) 3-60 low flat
Dagger Dran (Dran Dagger) 4-60 rush
Tusk Mammoth 3-60 taper
Steel samurai 4-80 Taper
chain incendio 5-60 high taper
arrow wizard 4-60 needle


I know some other people who would like good combos

PERSON 1
Sword Dran 3-60 flat(blue)
Scythe Incendio 4-60 taper (red)
Roar tyranno 9-60 gear flat
Scythe Incendio 3-80 ball (yellow)
Horn rhino 3-80 spike
Claw Leon 5-60 point


PERSON 2
Soar Phoenix 9-60 gear flat
Talon Ptera 3-80 ball
Arrow wizard (yellow) 4-80 ball
lance Knight 4-80 high needle
wand wizard 5-60

Urgent Help

Our country's first local tournament is coming up and I want to prepare a good deck to fight against the seasonal Canadian champion, unfortunately I have some of these on my current collection (G3 format)

Hells Hammer stock
Shark edge stock
Shadow Shinobi stock
Wizard Arrow stock
Knight Lance stock
Knight Shield (purple) 5-80 Taper

My current combo is

Knight Shield 5-80 Hexa/Ball
Hells Hammer 3-70 Low flat
Shark edge 3-60 Taper

Should I use low flat on shark instead? My current problem is literally just what ratchet I should use

Urgent Help

Our country's first local tournament is coming up and I want to prepare a good deck to fight against the seasonal Canadian champion, unfortunately I have some of these on my current collection (G3 format)

Hells Hammer stock
Shark edge stock
Shadow Shinobi stock
Wizard Arrow stock
Knight Lance stock
Knight Shield (purple) 5-80 Taper

My current combo is

Knight Shield 5-80 Hexa/Ball
Hells Hammer 3-70 Low flat
Shark edge 3-60 Taper

Should I use low flat on shark instead? My current problem is literally just what ratchet I should use

Yes, you should use LF on shark

---

I am ElDiablo69, the number 1 Australian beycrafter
SharkEdge 4-60 GF is the best combo for that blade, change my mind.
Beyblade for the Olympics: https://chng.it/B7nNnJC4z9

Hello, I’m new to blading, is there a chance this thread is still open? If so, here’s what parts I have:

(this is for the 3v3 deck format by the way)

Blades: Hell’s Chain, Wizard Arrow, Hell’s Scythe, Knight Shield, Phoenix Wing, Shark Edge

Ratchets: 4-60 (X2), 9-60, 3-60, 5-60, 4-80

Bits: High Taper, Needle, Point, Low flat, Gear Flat

I have no clue where to start, as I know very little about the meta.

Please help!

beyblade burst and as of parts I have almost all DB/BU just don't have saber and divine and the twin hellios/Hyperion set

---

yes i am a licensed beycrafter 

I have got all X beys from the UX and BX system. Can I get 1 Attack 1 Defense and 1 Stamina combo and somewhere in between is also cool.