Hi everyone!
'm Sammie! Happy to join your forum!

---

Web Designer at Popup Maker

Someone uploaded this video about the Tokyo Toy Show

---

I have an Idea for a driver. I'm not sure what to name it but it is a partially rounded extreme with a ring of plastic around it.
how it will work is if launched at an angle it will slide on the plastic then do a tight flower right to the center for a delayed smash. But if launched straight aiming for the center it will do a tight circle then will spiral to the tornado ridge on the plastic. real life rush launch. but this is if it works like a extremely worn rf.

---

Highly Observant Hasbro Blader.

---

Someone uploaded this video about the Tokyo Toy Show

Wow! They did such a great job with the displays from each series.

---

Someone uploaded this video about the Tokyo Toy Show

Wow! They did such a great job with the displays from each series.

That was d-rights' section actually, which is quite surprising. I wonder what they could have done all of this for.

The other day, was trying different God Chips on Drain Fafnir when I noticed the Layer felt tighter during assembly with the usual 8 and Revolve when it was used with certain God Chips. I then tried all 11 of the God Chips available to me at the moment on dF and discovered that a total of 5 of them fit tightly into the Layer and make the bey's assembly slightly tighter. I also observed that all 5 of those tightly fitting God Chips had A# (A4, A3, A5) molding number codes under them, while the rest of the more loosely fitting God Chips had B# and C# molding number codes.

I measured the chips with my digital caliper, so here are their height ranges:
A#: 6.49-6.57mm
B# & C#: 6.39-6.49mm

Has anybody else made similar observations? If you have dF and several God Chips, I'd recommend using dF for this test because it's teeth aren't as strong as other God Layers, which makes the difference in tightness easier to notice. Might also be worth noting that my Revolve Driver has the R sticker on it as well.

---

Spoiler (Click to View)

This is what we all want, Brad.

Few new beybldes information from Tokyo Toy Show.
1 RBV 7 line up will be Bakuten recolor and rare bey looks like Trypio.
2 God Minoboros and God Zeus will be in Booster set.
3 God neptune will release booster.

Few new beybldes information from Tokyo Toy Show.
1 RBV 7 line up will be Bakuten recolor and rare bey looks like Trypio.
2 God Minoboros and God Zeus will be in Booster set.
3 God neptune will release booster.

Trypio! So will RBV7 be filled with Dranzer, Drigers, Draciels and Dragoons?

---

Few new beybldes information from Tokyo Toy Show.
1 RBV 7 line up will be Bakuten recolor and rare bey looks like Trypio.
2 God Minoboros and God Zeus will be in Booster set.
3 God neptune will release booster.

That does make sense! And nice!

---

Spoiler (Click to View)

Kai-V is an omniscient being who imparts starving mortals such as ourselves with the morsels of Beyblade foreknowledge we so unknowingly desired. She does so not out of grace, but because it pleases her. May the great Kai-V excuse your insolence and show mercy upon your blader spirit.

Beymen.

Evil is very bad though... There is just nothing good to do with it.

They do not, because clearly you punch them with these brass knuckles.

Sorry I didn't go to Business day and not sure. But these informations are from people who went to Business day and TT forced don't take pics. And anyone doesn't have pics.

The other day, was trying different God Chips on Drain Fafnir when I noticed the Layer felt tighter during assembly with the usual 8 and Revolve when it was used with certain God Chips. I then tried all 11 of the God Chips available to me at the moment on dF and discovered that a total of 5 of them fit tightly into the Layer and make the bey's assembly slightly tighter. I also observed that all 5 of those tightly fitting God Chips had A# (A4, A3, A5) molding number codes under them, while the rest of the more loosely fitting God Chips had B# and C# molding number codes.

I measured the chips with my digital caliper, so here are their height ranges:
A#: 6.49-6.57mm
B# & C#: 6.39-6.49mm

Has anybody else made similar observations? If you have dF and several God Chips, I'd recommend using dF for this test because it's teeth aren't as strong as other God Layers, which makes the difference in tightness easier to notice. Might also be worth noting that my Revolve Driver has the R sticker on it as well.

I just get my first God layer and I see that my god chip could be push down and get out of its supposed tracks and made my God layer having no clicks when assembled with the driver... take a look if you have it in its track corectly may be its the gap you have making it more tight..

edit: BTW I've got Tornado Wyvern.

---

Beyblade for life! I'm proud to represent Québec and all french people! :D
----
Beycloud Profil
----
Best tournament:

2014 (Click to View)

Montréal, Québec, Canada - July 12th 2014 - The Bombdiggity Tournament Limited Format => finished third!
Montréal, Québec, Canada - August 16th 2014 - "Notre ami Félix" tournament Zero-G => Finished Second!
Montréal, Québec, Canada - October 11th 2014 - QuéBeycois Tournament Standard Format => Finished third!

2015 (Click to View)

Montréal, Québec, Canada- May 24th 2015 - BeyDays Tournament Standard Format => Finished first!
Montréal, Québec, Canada- June 21st 2015 - La St-Jean Go SHOOT! Tournament Zero-G Format => Finished Second!

The other day, was trying different God Chips on Drain Fafnir when I noticed the Layer felt tighter during assembly with the usual 8 and Revolve when it was used with certain God Chips. I then tried all 11 of the God Chips available to me at the moment on dF and discovered that a total of 5 of them fit tightly into the Layer and make the bey's assembly slightly tighter. I also observed that all 5 of those tightly fitting God Chips had A# (A4, A3, A5) molding number codes under them, while the rest of the more loosely fitting God Chips had B# and C# molding number codes.

I measured the chips with my digital caliper, so here are their height ranges:
A#: 6.49-6.57mm
B# & C#: 6.39-6.49mm

Has anybody else made similar observations? If you have dF and several God Chips, I'd recommend using dF for this test because it's teeth aren't as strong as other God Layers, which makes the difference in tightness easier to notice. Might also be worth noting that my Revolve Driver has the R sticker on it as well.

Not another type of variation...

Few new beybldes information from Tokyo Toy Show.
1 RBV 7 line up will be Bakuten recolor and rare bey looks like Trypio.
2 God Minoboros and God Zeus will be in Booster set.
3 God neptune will release booster.

So there is a god version of Neptune and Minoboros?

Few new beybldes information from Tokyo Toy Show.
1 RBV 7 line up will be Bakuten recolor and rare bey looks like Trypio.
2 God Minoboros and God Zeus will be in Booster set.
3 God neptune will release booster.

So there is a god version of Neptune and Minoboros?

Yeah

---

Few new beybldes information from Tokyo Toy Show.
1 RBV 7 line up will be Bakuten recolor and rare bey looks like Trypio.
2 God Minoboros and God Zeus will be in Booster set.
3 God neptune will release booster.

Awesome! I kinda hope it's just Mad Minoboros in the booster set and not a whole new one, but I'm glad we're getting a new Neptune!

Calling it now, the Trypio lookalike in RBV7 is Maximum Garuda. Of course they would use the Flying Defenser gimmick on a bird.

So there is a god version of Neptune and Minoboros?

Yeah

Is is possible that beys that didnt get a chance in the anime. F2, E2, P2, I2, Chaos, Trident, etc will get god evolutions

Yeah

Is is possible that beys that didnt get a chance in the anime. F2, E2, P2, I2, Chaos, Trident, etc will get god evolutions

Maybe

---

BBG says vanilla Neptune is the worst out of RLC 6...

TRIGGERED

THERE IS LITERALLY A P2 RIGHT NEXT TO IT DAMMIT
DO YOU NIMWITS NOT READ ANYTHING THAT IS SAID ABOUT ANY LAYER EVER

---

Spoiler (Click to View)

Kai-V is an omniscient being who imparts starving mortals such as ourselves with the morsels of Beyblade foreknowledge we so unknowingly desired. She does so not out of grace, but because it pleases her. May the great Kai-V excuse your insolence and show mercy upon your blader spirit.

Beymen.

Evil is very bad though... There is just nothing good to do with it.

They do not, because clearly you punch them with these brass knuckles.

I'm sure they don't mean worst as in performance, just that it's an old layer, so it's not that exciting.

---

“In the course of twenty crowded years, one parts with many illusions. I did not wish to lose the early ones. Some memories are realities, and are better than anything that can ever happen again.” -Jim Burden (My Ántonia)

Few new beybldes information from Tokyo Toy Show.
1 RBV 7 line up will be Bakuten recolor and rare bey looks like Trypio.
2 God Minoboros and God Zeus will be in Booster set.
3 God neptune will release booster.

Where did you find this? I been searching stuff about the Tokyo Toy Show and beyblades they had there and haven't found this stuff

I think he actually went there. There's also talk about it in Japanese groups and Twitter

---

WBBA Profile
YouTube Channel
I sell Beyblade Burst!
Line: gankoba

I think he actually went there. There's also talk about it in Japanese groups and Twitter

Oh ok that would make sense, thanks Leo anyway

Calling it now, the Trypio lookalike in RBV7 is Maximum Garuda. Of course they would use the Flying Defenser gimmick on a bird.

Garuda isn't just a bird, he's a half man Hindu god with the most muscular wings in all mythology. Even just beating them hard enough to float in place was said to create a nigh impenetrable wind barrier that would blow away anything and anyone not securely strapped down. I would be very surprised if that weren't featured in the anime to some extent and a "Flying Defense" ring sounds very fitting for him.

I think he actually went there. There's also talk about it in Japanese groups and Twitter

I think he actually went there. There's also talk about it in Japanese groups and Twitter

Oh ok that would make sense, thanks Leo anyway

The thing is that there were two business-and-press-only days before the public days, and apparently displays may have been different then. There are always some areas where photography and filming are utterly forbidden, but usually we get an accidental leak even from some of the media guests. However, in this case, marutti did not see anything because he went during the two public days, but there are some rumours about that Trypio replica, but overall even the Zeus and Neptune God Layers thing seem too unbelievable for now, therefore we should really take those rumours with a huge grain of salt. A fully Bakuten Random Booster with Trypio as a prize, in the main Burst line, sounds especially suspicious.


Anyway, apparently the real Blader DJ from Bakuten Shoot Beyblade came by for the d-rights displays yesterday!



I am mostly surprised that the guy has not changed much and that the costume still fits hahah. And I cannot believe that we still do not know the man's real name.

I am mostly surprised that the guy has not changed much and that the costume still fits hahah. And I cannot believe that we still do not know the man's real name.

His name is God.

---

My Cho-Z Reaper Deathscyther .12.Cr concept render, click below to see!

Spoiler (Click to View)

No I don't plan on doing more yet.

I should probably go back to making fan custom Zero G beyblade concepts again